
Magna Mining Inc. (TSX-V: NICU) (OTCQX: MGMNF) (FSE: 8YD) is pleased to provide an update on exploration activities and assay results from ongoing exploration at the past-producing Levack Mine, located in the North Range of the Sudbury Basin, northeastern Ontario, Canada (Figure 1). Drillhole FNX6083-W2 was targeted approximately 40 metres to the north of drill hole FNX6083-W1 (see News Release dated August 28, 2025) and below drill hole MLV-25-14A which intersected 2.6% copper, 8.1% nickel and 17.8 g/t platinum + palladium + gold over 0.6 metres. Drillhole FNX6083-W2 intersected multiple mineralized intervals including copper rich chalcopyrite veins grading up to 19.3% copper and 26.1 g/t platinum + palladium + gold, as well as nickel rich pyrrhotite-pentlandite veins grading up to 12.4% nickel and 24.2 g/t platinum + palladium + gold.
Highlights from the new assay results include:
Dave King, SVP Exploration and Geoscience, stated, “We are encouraged by the assay results received from our third drillhole testing the R2 exploration target as we continue to intersect high grade, precious metal rich massive sulphide veins in the footwall environment of the Levack Mine. Drillhole FNX6083-W2 was targeted north of FNX6083-W1, and intersected mineralization higher in the hole than expected and is interpreted to be within the transition zone between the nickel rich pentlandite veins and the copper rich chalcopyrite veins. In the Morrison Footwall Cu-PGE Deposit, located approximately 600 metres to the south-west of the R2 target area, this would indicate more chalcopyrite dominated veins could be found at lower elevations. Footwall copper-precious metals systems in Sudbury often have multiple vein orientations, and this appears to be the case for the R2 target area. We are in the early stages of defining and understanding the controls on sulphide veining in the R2 target area and recognize that the mineralization is complex. We will continue to refine our interpretation and adjust the ongoing exploration program with each drillhole completed.”
There are currently two surface diamond drills operating at the Levack Mine, both focused on the R2 target area, between the No. 3 Ni-Cu Zone and the Morrison Footwall Cu-PGE Deposit. Drillhole FNX6083-W2 was a wedge hole designed to test approximately 40 metres north of FNX6083-W1 and at the same elevation, however the hole intersected several narrow high grade sulphide veins approximately 50 metres higher than expected. Mineralization consisted of nickel rich pentlandite veins and copper rich chalcopyrite veins with high precious metal content, including 19.3% Cu, 0.3% Ni and 26.1 g/t Pt + Pd + Au over 0.5 metres. In comparison to other known footwall copper-precious metals deposits at Levack, this would suggest drillhole FNX6083-W2 is within the transition zone, similar to the Rob’s Zone of the Morrison Deposit, and more chalcopyrite dominated veins could be expected at lower elevations. Ongoing drilling is targeting this area as we continue to define the extent and geometry of the R2 mineralization. Two additional drillholes, FNX6083-W3 and FNX2026-W1, both targeted down-dip of FNX6083-W1, have been completed and assays are pending.
Also of significance, additional silver assays have been received for previously released drillholes MLV-25-14A and FNX6083-W1 and include up to 190 g/t Ag over 1.0 metre in FNX6083-W1. Drillhole FNX6083-W2 also encountered silver mineralization associated with copper rich chalcopyrite veins, including up to 127.0 g/t Ag over 0.5 metres and 109.0 g/t Ag over 0.6 metres. See Table 1 for a summary of assays results.
Levack Exploration Plan
Magna is focusing its near-term exploration program at the Levack Mine on this prospective footwall environment, continuing to test the lateral and downdip extent of the R2 target and other high-priority Sudbury Breccia units that have the potential to host copper and precious metals-rich footwall deposits. Ongoing surface drilling on the R2 target will be designed to confirm and refine the geological model and define the extent of mineralization. Additionally, one underground diamond drill is currently testing footwall targets east of the Fecunis Fault, and a second underground drill will be active by month-end. This drilling is designed to follow-up on a historical intersection in drillhole FNX21200 grading 33.4% Cu, 0.9% Ni, 23.9 g/t Pt + Pd + Au over 0.2 metres. The initial drillhole will target an off-hole geophysical anomaly identified in FNX21200. Mineralization in this area could represent the Fecunis Fault offset equivalent of the R2 mineralization and remains open for exploration in all directions.
Figure 1: Location of Magna Mining’s Existing Properties, and Key Sudbury Infrastructure
Figure 2: Oblique 3D View Looking North-East, Showing the Levack Mine Mineralized Zones in Relation to the R2 Target and Current Drilling
Table 1: Summary of Drillhole Results
Drillhole | Property | Zone | From (m) |
To (m) |
Length (m) |
Cu % |
Ni % |
Co % |
Pt g/t |
Pd g/t |
Au g/t |
Ag g/t |
Pt+Pd+Au g/t | NiEq | CuEq | |
MLV-25-14A* | Levack | Levack Contact |
340.26 | 355.55 | 15.29 | 0.33 | 0.80 | 0.03 | 0.20 | 0.20 | 0.02 | 1.18 | 0.42 | 0.96 | 1.70 | |
Including | 350.82 | 355.55 | 4.73 | 0.56 | 1.09 | 0.04 | 0.41 | 0.46 | 0.04 | 1.59 | 0.90 | 1.40 | 2.50 | |||
No. 3 Footwall | 790.38 | 792.80 | 2.42 | 1.70 | 0.92 | 0.02 | 1.29 | 1.88 | 0.08 | 7.19 | 3.25 | 2.19 | 3.90 | |||
Including | 792.50 | 792.80 | 0.30 | 7.87 | 0.89 | 0.00 | 1.43 | 1.61 | 0.05 | 33.00 | 3.09 | 5.42 | 9.65 | |||
and | 799.50 | 802.42 | 2.92 | 0.86 | 1.60 | 0.01 | 0.79 | 5.19 | 0.08 | 4.57 | 6.06 | 2.71 | 4.82 | |||
Including | 799.50 | 800.07 | 0.57 | 2.59 | 8.07 | 0.04 | 3.41 | 14.36 | 0.03 | 14.00 | 17.80 | 10.83 | 19.28 | |||
FNX6083-W1* | Levack | R2 Target | 991.85 | 992.22 | 0.37 | 16.68 | 0.07 | 0.00 | 1.33 | 2.44 | 0.09 | 52.00 | 3.86 | 9.57 | 17.03 | |
and | 1005.48 | 1005.78 | 0.30 | 13.75 | 0.49 | 0.00 | 3.29 | 13.72 | 1.56 | 40.00 | 18.57 | 10.67 | 18.99 | |||
and | 1048.48 | 1048.84 | 0.36 | 2.87 | 0.05 | 0.00 | 7.98 | 5.64 | 0.81 | 40.00 | 14.43 | 3.73 | 6.65 | |||
and | 1050.70 | 1051.15 | 0.45 | 3.24 | 0.10 | 0.00 | 0.70 | 1.93 | 0.54 | 19.00 | 3.17 | 2.36 | 4.19 | |||
and | 1056.41 | 1056.71 | 0.30 | 6.58 | 0.68 | 0.01 | 7.03 | 8.18 | 1.31 | 42.00 | 16.52 | 6.65 | 11.83 | |||
and | 1152.23 | 1154.83 | 2.60 | 12.77 | 0.55 | 0.01 | 3.39 | 7.79 | 20.67 | 87.57 | 31.85 | 15.06 | 26.81 | |||
Including | 1153.16 | 1154.16 | 1.00 | 29.21 | 0.92 | 0.02 | 7.26 | 15.84 | 29.87 | 190.00 | 52.97 | 28.62 | 50.96 | |||
and | 1196.60 | 1197.14 | 0.54 | 25.53 | 1.80 | 0.03 | 10.40 | 12.08 | 3.80 | 169.00 | 26.28 | 19.54 | 34.79 | |||
FNX6083-W2 | Levack | No. 3 Footwall | 1097.05 | 1097.56 | 0.51 | 19.27 | 0.26 | 0.01 | 8.91 | 15.19 | 2.02 | 127.00 | 26.12 | 14.57 | 25.95 | |
and | 1106.71 | 1116.47 | 9.76 | 1.93 | 0.69 | 0.01 | 1.53 | 2.41 | 0.54 | 14.32 | 4.48 | 2.35 | 4.19 | |||
including | 1106.71 | 1107.12 | 0.41 | 4.91 | 12.36 | 0.10 | 6.82 | 16.21 | 1.15 | 46.00 | 24.18 | 16.85 | 30.01 | |||
and | 1108.30 | 1108.87 | 0.57 | 14.12 | 0.52 | 0.01 | 2.16 | 7.00 | 1.28 | 109.00 | 10.44 | 9.71 | 17.28 | |||
and | 1114.40 | 1115.50 | 1.10 | 7.02 | 0.09 | 0.01 | 6.81 | 7.48 | 2.12 | 40.27 | 16.40 | 6.49 | 11.55 |
Important Notes
*Previously Reported
All lengths are downhole length. True widths are uncertain at this time.
Ni Eq % = (Ni% x 85% Recovery 2204 x Ni Price $/lb) + (Cu% x 96% Recovery x 2204 x Cu Price $/lb) + (Co% x 56% Recovery x 2204 x Co Price $/lb) + (Pt gpt x 69% Recovery / 31.1035 x Pt $/oz) +(Pd gpt x 68% Recovery / 31.1035 x Pd $/oz) + (Au gpt x 68% Recovery / 31.1035 x Au $/oz))/2204 x Ni $/lb.
Cu Eq % = (Ni% x 85% Recovery 2204 x Ni Price $/lb) + (Cu% x 96% Recovery x 2204 x Cu Price $/lb) + (Co% x 56% Recovery x 2204 x Co Price $/lb) + (Pt gpt x 69% Recovery / 31.1035 x Pt $/oz) +(Pd gpt x 68% Recovery / 31.1035 x Pd $/oz) + (Au gpt x 68% Recovery / 31.1035 x Au $/oz))/2204 x Cu $/lb.
Metal prices in US$: $7.30/lb Ni, $4.10/lb Cu, $15.00/lb Co, $1,000/oz Pt, $1,050/oz Pd and $2,200/oz Au.
Table 2: Drillhole Collar Coordinates
BHID | Easting | Northing | Elevation | Azimuth | Dip | Depth (m) |
FNX6083-W2 | 471667 | 5167000 | 398 | 116 | 63 | 1235 |
*Drillhole Coordinates are in Coordinate System NAD 83 Zone 17
Qualified Person for Technical Information
The scientific and technical information in this press release has been reviewed and approved by David King, M.Sc., P.Geo. Mr. King is the Senior Vice President, Exploration and Geoscience for Magna Mining Inc. and is a qualified person under National Instrument 43-101.
Quality Assurance and Control
Sample QA/QC procedures for Magna have been designed to meet or exceed industry standards. Drill core is collected from the diamond drill and placed in sealed core trays for transport to Magna’s core facilities. Levack drilling utilizes NQ sized core and McCreedy West utilizes BQTK sized core. The core is then logged, and samples marked in intervals of up to 1.5m. Levack drill core is split and sampled ½ core, and McCreedy West is whole core sampled. Samples are then put into plastic bags with 10 bagged samples being placed into rice bags for transport to SGS Laboratories in Garson, Ontario for preparation, which are then shipped to Lakefield, Ontario for analysis. Samples are submitted in batches of 50 with 4 QA/QC samples including, 2 certified reference material standards and 2 samples of blank material.
About Magna Mining Inc.
Magna Mining Inc. is a producing mining company with a strong portfolio of copper, nickel, and platinum group metals (PGM) assets located in the world-class Sudbury mining district of Ontario, Canada. The Company’s primary asset is the McCreedy West Mine, currently in production, supported by a pipeline of highly prospective past-producing properties including Levack, Crean Hill, Podolsky, and Shakespeare.
Magna Mining is strategically positioned to unlock long-term shareholder value through continued production, exploration upside, and near-term development opportunities across its asset base.
Avanti Gold Corp. (CSE: AGC) (FSE: X370) is pleased to announce t... READ MORE
Black Mammoth Metals Corporation (TSX-V: BMM) (OTC: LQRCF) is pl... READ MORE
Results from hole LADD031 reported 12.72 metres grading 8.56 g/t ... READ MORE
Dolly Varden Silver Corporation (TSX-V: DV) (NYSE: DVS) (FSE: DVQ... READ MORE
Goliath Resources Limited (TSX-V: GOT) (OTCQB: GOTRF) (FSE: B4IF) is ple... READ MORE