The Prospector News

LIFT Announces Results from Summer Drilling at the Adina Lithium Project, Québec

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

LIFT Announces Results from Summer Drilling at the Adina Lithium Project, Québec

 

 

 

 

 

Li-FT Power Ltd. (TSX-V: LIFT) (ASX: LFT) (OTCQX: LIFFF) (Frankfurt: WS0) is pleased to report results from 11 drill holes completed at the Adina Lithium Project in Québec, Canada (Figures 1, 2). These holes form part of LIFT’s 2026 work program, which comprised 39 holes totalling 11,420.5 metres, and follow the assay results from the first five holes announced October 26, 2026. LIFT also completed sampling of six geotechnical holes drilled in 2024, totalling 1,983 metres, that were previously unassayed for lithium. Accordingly, the cumulative 2026 drill core processed by LIFT comprises 45 holes and 13,403.5 metres.

 

Intersections from the 11 new holes (ALP0006 to ALP0016) are presented in Table 1 and shown in Figures 2, 3, 4, 5, 6, and 7. Highlights include an intersection of 45 metres (downhole length) averaging 2.71% Li2O from hole ALP0007. Holes ALP0006 and ALP0008 were drilled to collect geotechnical information to support future feasibility studies, not spodumene mineralization.

 

Table 1: Notable results for diamond drill holes presented in this news release.

 

Hole No. From (m) To (m) Interval (m) Li2O% Zone
ALP0006 Drilled for geotechnical information
ALP0007 164 209 45 2.71 Galinée
ALP0008 Drilled for geotechnical information
ALP0009C 308 313 5 1.53 Main
ALP0010 197 206 9 0.78 Main
ALP0010 339 365 26 1.86 Footwall
ALP0011 No significant intersections
ALP0012C 204 212 8 1.43 Galinée
ALP0013 248 252 4 2.47 Galinée
ALP0013 285 295 10 1.56 Galinée
ALP0014 185 197 12 3.14 Galinée
ALP0014 210 215 5 0.51 Galinée
ALP0015 186 198 12 0.60 Galinée
ALP0015 378 380 2 0.84 Galinée
ALP0015 395 397 2 1.75 Galinée
ALP0016 185 210 25 2.71 Galinée

*Intersections are reported using a nominal 0.5% Li2O cut-off grade, with a minimum composite width of 5 metres and maximum consecutive internal dilution of 5 metres. Intervals are downhole lengths; true thickness is unknown.

 

Francis MacDonald, President & CEO of LIFT, commented:

 

“Galinée is delivering exactly what we hoped for when we consolidated it into the project in May. Hole ALP0007 returned 45 metres at 2.71% Li₂O, ALP0016 returned 25 metres at 2.71% Li₂O, and ALP0014 returned 12 metres at 3.14% Li₂O. These are wide, high-grade intersections from a zone that had seen limited drilling before this year, and they confirm Galinée as a high-grade part of the Adina system. Galinée was the main focus of our 2026 program, and these results will feed directly into the updated Mineral Resource Estimate and Preliminary Economic Assessment targeted for early 2027. Grade is one of the biggest drivers of project economics. Adding high-grade tonnes at Galinée, together with our option on the Renard processing facility, strengthens our path toward a new source of spodumene concentrate in Québec.”

 

 Figure 1 – Location of LIFT’s spodumene pegmatite properties in Québec, Canada

 

The Adina spodumene pegmatite complex comprises several pegmatite zones within a corridor approximately 350 metres wide that can be traced along strike for up to 2.5 kilometres, both at surface and under cover. The Adina Main and Footwall zones are the most extensively drilled, while the Galinée Zone, although occurring within the same corridor, remains comparatively underexplored, having been located on a separate mineral property until May 20261. Together, these three zones define an east-west trending dyke system comprising multiple subparallel dykes ranging from less than 1 metre to 60 metres in thickness and dipping southward at approximately 35°.

 

LIFT’s 2026 work program focused primarily on the Galinée Zone (Figures 4, 5, 6, and 7), with drilling designed to establish a level of geological understanding comparable to that of the Adina Main and Footwall zones. The results of this work will contribute to the integration of the Adina and Galinée zones into an updated Mineral Resource Estimate and Preliminary Economic Assessment, both targeted for early 20272.

 

On a regional scale, the Adina Lithium Project is located in the Eeyou Istchee James Bay region of Québec, Canada, a well-established hard-rock lithium district hosting several significant spodumene-bearing pegmatite deposits (Figure 1). These include the Shaakichiuwaanaan Project, with mineral reserves of 84.3 Mt at 1.26% Li2O, all in the Probable category3; the Moblan Lithium Project, with mineral resources of 121.0 Mt at 1.19% Li2O, comprising 6.3 Mt at 1.50% Li2O Measured, 101.4 Mt at 1.19% Li2O Indicated and 13.3 Mt at 1.06% Li2O Inferred4; and the Whabouchi Lithium Project, with mineral resources of 26.9 Mt at 1.45% Li2O (18.7 Mt at 1.51% Li2O Indicated and 8.3 Mt at 1.31% Li2O Inferred, exclusive of ore reserves), and ore reserves of 26.5 Mt at 1.32% Li2O (10.5 Mt at 1.40% Li2O Proved and 16.0 Mt at 1.27% Li2O Probable)5.

 

Figure 2 – Plan map showing historical drill traces and LIFT’s 2026 drill holes, as well as a level plan of the Adina pegmatite complex at 475 m above sea level, approximately 50 m below the surface and 25 m below the bedrock-till interface.

 

Figure 3 – North–south vertical section A-A’, showing interpretation of Adina pegmatite, LIFT’s 2026 new and previously released drilling6 and historical drill results previously reported to the ASX7. Section trace A-A’ is shown in Figure 2.

 

Figure 4 – North–south vertical section B-B’, showing interpretation of Adina pegmatite, as well as LIFT’s 2026 new and previously released drilling6. Section trace B-B’ is shown in Figure 2.

 

Figure 5 – North–south vertical section C-C’, showing interpretation of Adina pegmatite, LIFT’s 2026 new and previously released drilling8 and historical drill results previously reported to the ASX9,10. Section trace C-C’ is shown in Figure 2.

 

Figure 6 – North–south vertical section D-D’, showing interpretation of Adina pegmatite, LIFT’s 2026 new and previously released drilling8 and historical drill results previously reported to the ASX9,10. Section trace D-D’ is shown in Figure 2.

 

Figure 7 – North–south vertical section E-E’ through the Adina pegmatite complex showing results from LIFT’s 2026 drillhole ALP0014, as well as historical drill results previously reported to the ASX11,12. Section trace E-E’ is shown in Figure 2.

 

Table 2: Collar information for diamond drill holes presented in this news release.

 

Drill Hole NAD83 Easting Northing Elevation (m) Depth (m) Azimuth (°) Dip (°)
ALP0006 Zone 18N 667,989 5,908,550 498 231 000 -47
ALP0007 Zone 18N 668,440 5,908,364 501 429 000 -69
ALP0008 Zone 18N 669,582 5,908,597 514 270 331 -49
ALP0009C Zone 18N 668,289 5,908,357 499 321 000 -52
ALP0010 Zone 18N 668,390 5,908,550 505 375 000 -55
ALP0011 Zone 18N 668,390 5,908,461 507 291 000 -55
ALP0012C Zone 18N 668,440 5,908,581 509 234 359 -75
ALP0013 Zone 18N 668,390 5,908,461 507 300 000 -67
ALP0014 Zone 18N 668,539 5,908,597 511 231 000 -76
ALP0015 Zone 18N 668,488 5,908,571 508 420 000 -58
ALP0016 Zone 18N 668,390 5,908,460 507 312 000 -83

 

Quality Assurance and Quality Control

 

All drill core samples were collected under the supervision of LIFT employees and contractors. Drill core was transported from the drill platform to the core processing facility at the Renard Mine, where it was logged, photographed, and split using a diamond saw prior to sampling. Samples were then bagged, and blanks and certified reference materials were inserted at regular intervals. Groups of samples were placed in large bags and sealed with numbered tags to maintain a chain of custody before being transported from LIFT’s Renard core logging facility to MSALABS (“MSA”), a commercial laboratory independent of LIFT, for sample preparation (crushing and pulverizing) and lithium assay.

 

Samples were prepared for analysis by MSA using preparation methods CRU-CPA and PPU-530. Samples were dried in their entirety and crushed to 70% passing 2 mm, and a 500 g subsample was split (CRU-CPA). A 1,000 g sample was pulverized to 85% passing 75 µm (PPU-530). Prepared sample pulps were analyzed using MSA’s custom multi-element analytical package PER-700W, involving sodium peroxide fusion of a 0.15 g aliquot followed by inductively coupled plasma atomic emission spectrometry and mass spectrometry (ICP-AES/MS). Lithium concentrations were converted to lithium oxide (Li₂O) using a conversion factor of 2.153.

 

About LIFT

 

LIFT is a Canadian lithium exploration and development company focused on advancing its flagship Adina Lithium Project and the Renard processing facility in the Eeyou Istchee James Bay region of Québec. The Company is working toward becoming Canada’s next producer of spodumene concentrate by leveraging its large-scale, high-grade lithium resources and the existing infrastructure at Renard, which LIFT holds under an exclusive option to acquire. LIFT also owns the Yellowknife Lithium Project in the Northwest Territories and maintains additional exploration properties in Canada.

 

Qualified Person

 

The disclosure in this news release of scientific and technical information regarding LIFT’s mineral properties has been reviewed and approved by Marc-Antoine Laporte, M.Sc., P.Geo., Director Geological Services MIN NAM Global, SGS Geological Services, who is an independent Qualified Person as defined by National Instrument 43-101 Standards of Disclosure for Mineral Projects (NI 43-101).

 

Posted November 17, 2026

Share this news article

MORE or "UNCATEGORIZED"


BP Silver Corp. Discovers High-Grade Silver at Jalsuri Northeast, Intersecting 2,620 g/t Silver (84.2 oz/t) over 1 Meter Within a 12-Meter Interval Grading 441 g/t Silver (14.2 oz/t) at Cosuño Silver Project

BP Silver Corp. (TSX-V: BPAG) (OTCQB: BPSCF) announces assay resu... READ MORE

November 17, 2026

Goliath Drills 13.45 g/t AuEq Over 4.85 Meters Expanding The High-Grade Golden Gate Zone By 130 Meters At The Surebet Gold Discovery That Remains Open For Expansion, Golddigger Property, Golden Triangle, B.C.

Assays are pending for 40 holes drilled in 2026. Drill hole GD-26... READ MORE

November 17, 2026

Group Eleven Intersects 5.4m of 20.7% Zn+Pb and 87 g/t Ag, within 13.7m of 9.1% Zn+Pb and 38 g/t Ag; and Cuts 7.7m of 139 g/t Ag and 0.28% Cu in Step-Out Drilling at Ballywire

Group Eleven Resources Corp. (TSX-V: ZNG) (OTCQB: GRLVF) (FSE: 3G... READ MORE

November 17, 2026

Santacruz Silver Reports Third Quarter 2026 Financial Results

Santacruz Silver Mining Ltd. (NASDAQ:SCZM) (TSX:SCZ) reports its financi... READ MORE

November 17, 2026

Copyright 2026 The Prospector News