New Found Gold Corp. (TSX-V: NFG) (OTC: NFGFF) is pleased to announce assay results from an additional ten holes drilled at the Keats Zone. These holes were drilled as part of the Company’s ongoing 200,000m diamond drill program at its 100%-owned Queensway Project located on the Trans-Canada Highway 15 km west of Gander, Newfoundland.
Highlights
Hole No. | From (m) | To (m) | Interval (m)* | Au (g/t) |
NFGC-20-74 | 44.00 | 46.00 | 2.00 | 32.27 |
And | 49.15 | 70.50 | 21.35 | 3.36 |
And | 81.70 | 85.75 | 4.05 | 45.59 |
NFGC-21-85 | 108.45 | 111.40 | 2.95 | 49.41 |
NFGC-21-119 | 176.20 | 183.15 | 6.95 | 15.57 |
NFGC-21-122 | 8.10 | 10.00 | 1.90 | 24.75 |
And | 34.70 | 49.60 | 14.90 | 69.15 |
Incl | 34.70 | 43.85 | 9.15 | 106.46 |
*Note that the host structures are interpreted to be steeply dipping and true widths are estimated to be 70% to 80% of reported intervals. Intervals are calculated at a 1 g/t Au cut-off grade; grades have not been capped in the averaging. |
Greg Matheson, P.Geo., COO of New Found, stated: “Similar to the results the Company disclosed on March 29, 2021, these results continue to infill between our deepest interval disclosed to date (61.8 g/t Au over 13.65m in NFGC-21-118) and the near-surface, high-grade results up-plunge (see Figure 1). Current drilling at Keats is focused on extending the high-grade zone down plunge, providing further definition of the near surface, high-grade mineralization, and testing additional zones of high-grade mineralization including in footwall veining.”
Highlight Keats Main Zone drill intervals for reference
Hole | Interval | Au | Hole | Interval | Au | Hole | Interval | Au | Hole | Interval | Au | |||
(m) | (g/t) | (m) | (g/t) | (m) | (g/t) | (m) | (g/t) | |||||||
19-01 | 19.0 | 92.9 | 20-34 | 2.4 | 29.3 | 20-46 | 2.9 | 13.7 | 21-85 | 3.0 | 49.4 | |||
20-18 | 7.9 | 24.1 | 20-37 | 10.3 | 25.0 | 21-52 | 2.1 | 136.7 | 21-87 | 4.7 | 27.8 | |||
20-19 | 18.9 | 31.2 | 20-38 | 5.8 | 19.8 | And | 14.1 | 31.5 | 21-90 | 3.9 | 24.5 | |||
20-21 | 18.4 | 15.8 | 20-40A | 7.3 | 19.3 | And | 5.6 | 13.7 | 21-97 | 6.5 | 37.1 | |||
20-23 | 41.4 | 22.3 | 20-41 | 10.4 | 22.5 | 20-56 | 32.3 | 6.2 | 21-101 | 8.5 | 17.9 | |||
20-26 | 6.9 | 44.5 | And | 15.9 | 31.4 | 20-74 | 4.1 | 45.6 | 21-104 | 11.4 | 29.1 | |||
20-28 | 4.1 | 40.1 | 20-43 | 18.2 | 10.0 | 21-78 | 2.3 | 18.2 | 21-118 | 13.7 | 61.8 | |||
20-29 | 16.9 | 25.0 | 20-45 | 13.8 | 28.4 | 21-79 | 7.9 | 22.7 | 21-119 | 7.0 | 15.6 | |||
20-30 | 6.1 | 10.3 | And | 3.3 | 20.6 | 21-80 | 39.1 | 25.8 | 21-122 | 9.2 | 106.5 | |||
20-32 | 13.1 | 45.3 | And | 2.0 | 17.1 | And | 2.3 | 41.6 |
Drillhole Details
Hole No. | From (m) | To (m) | Interval (m)* |
Au (g/t) | Zone |
NFGC-20-67 | 123.90 | 125.90 | 2.00 | 10.26 | Keats Main |
NFGC-20-69 | 109.40 | 113.55 | 4.15 | 1.58 | Keats Main |
And | 122.20 | 127.85 | 5.65 | 4.21 | |
Incl | 122.20 | 125.15 | 2.95 | 6.16 | |
And | 129.95 | 132.95 | 3.00 | 1.43 | |
NFGC-20-70 | 56.40 | 67.50 | 11.10 | 1.89 | Keats Main |
Incl | 61.80 | 62.40 | 0.60 | 12.15 | |
And | 77.45 | 80.80 | 3.35 | 1.92 | |
And | 92.75 | 95.25 | 2.50 | 3.80 | |
NFGC-20-72 | 133.50 | 139.80 | 6.30 | 2.89 | Keats Main |
Incl | 133.50 | 136.80 | 3.30 | 4.48 | |
And | 143.40 | 147.00 | 3.60 | 1.50 | |
And | 187.20 | 189.45 | 2.25 | 1.31 | Keats FW |
NFGC-20-74 | 44.00 | 46.00 | 2.00 | 32.27 | Keats Main |
And | 49.15 | 70.50 | 21.35 | 3.36 | |
And | 81.70 | 85.75 | 4.05 | 45.59 | |
NFGC-21-84 | 87.00 | 89.25 | 2.25 | 1.15 | Keats Main |
And | 102.40 | 106.50 | 4.10 | 1.31 | |
And | 155.00 | 157.15 | 2.15 | 1.12 | Keats FW |
NFGC-21-85 | 108.45 | 111.40 | 2.95 | 49.41 | Keats Main |
NFGC-21-88 | 152.20 | 154.60 | 2.40 | 1.02 | Keats FW |
NFGC-21-119 | 152.50 | 154.50 | 2.00 | 1.05 | Keats Main |
And | 176.20 | 183.15 | 6.95 | 15.57 | |
And | 218.85 | 221.00 | 2.15 | 1.45 | Keats FW |
NFGC-21-122 | 8.10 | 10.00 | 1.90 | 24.75 | Keats Main |
And | 25.00 | 27.00 | 2.00 | 1.97 | |
And | 34.70 | 49.60 | 14.90 | 69.15 | |
Incl | 34.70 | 43.85 | 9.15 | 106.46 |
Table 2: Summary of results reported in this release.
*Note that the host structures are interpreted to be steeply dipping and true widths are estimated to be 70% to 80% of reported intervals. Intervals are calculated at a 1 g/t Au cut-off grade; grades have not been capped in the averaging. | |||||
Hole No. | Azimuth (°) | Dip (°) | Length (m) | UTM E | UTM N |
NFGC-20-67 | 300 | -45 | 189 | 658216 | 5427437 |
NFGC-20-69 | 300 | -45 | 187 | 658225 | 5427432 |
NFGC-20-70 | 300 | -45 | 192 | 658249 | 5427504 |
NFGC-20-72 | 300 | -45 | 189 | 658234 | 5427427 |
NFGC-20-74 | 300 | -45 | 238 | 658229 | 5427491 |
NFGC-21-84 | 300 | -45 | 170 | 658253 | 5427490 |
NFGC-21-85 | 300 | -45 | 157 | 658148 | 5427388 |
NFGC-21-88 | 300 | -45 | 256 | 658029 | 5427284 |
NFGC-21-119 | 300 | -45 | 279 | 658185 | 5427331 |
NFGC-21-122 | 300 | -45 | 140 | 658240 | 5427523 |
Table 3: Location details of drill holes reported on in this release.
Sampling, Sub-sampling and Laboratory
True widths of the intercepts reported in this press release have yet to be determined but are estimated to be 70% to 80% of reported core lengths. Assays are uncut, and calculated intervals are reported over a minimum length of 2 meters using a lower cut-off of 1.0 g/t Au. All HQ split core assays reported were obtained by either complete sample metallic screen/fire assay or standard 30-gram fire-assaying with ICP finish at ALS Minerals in Vancouver, British Columbia, or by entire sample screened metallic screen fire assay at Eastern Analytical in Springdale, Newfoundland. The complete sample metallic screen assay method is selected by the geologist when samples contain coarse gold or any samples displaying gold initial fire assay values greater than 1.0 g/t Au. Drill program design, Quality Assurance/Quality Control and interpretation of results is performed by qualified persons employing a Quality Assurance/Quality Control program consistent with National Instrument 43-101 and industry best practices. Standards and blanks are included with every 20 samples for Quality Assurance/Quality Control purposes by the Company as well as the lab. Approximately 5% of sample pulps are sent to secondary laboratories for check assays.
Qualified Person
The technical content disclosed in this press release was reviewed and approved by Greg Matheson, P. Geo., Chief Operating Officer, and a Qualified Person as defined under National Instrument 43-101. Mr. Matheson consents to the publication of this news release dated April 7, 2021 by New Found. Mr. Matheson certifies that this news release fairly and accurately represents the information for which he is responsible.
About New Found Gold Corp.
New Found holds a 100% interest in the Queensway Project, located 15 km west of Gander, Newfoundland, and just 18 km from Gander International Airport. The project is intersected by the Trans-Canada Highway and has logging roads crosscutting the project, high voltage electric power lines running through the project area, and easy access to a highly skilled workforce. The Company is currently undertaking a 200,000-m drill program at Queensway, with a planned increase from the current six drill rigs to eight drill rigs in Q1, 2021. New Found currently has working capital of approximately $64 million. On closing of the $15 million flow through financing announced March 18, 2021 the Company would have an estimated $79 million of working capital.
Figure 1. Keats Main Zone Long Section (CNW Group/New Found Gold Corp.)
Figure 2. Keats Plan View (CNW Group/New Found Gold Corp.)
PPX Mining Corp. is pleased to announce that it has closed its fu... READ MORE
Elevation Gold Mining Corporation (TSX-V: ELVT) (OTCQB: EVGDF) i... READ MORE
Reunion Gold Corporation (TSX-V: RGD; OTCQX: RGDFF) is pleased to announ... READ MORE
Puma Exploration Inc. (TSX-V: PUMA) (OTCQB: PUMXF) is thrilled to... READ MORE
Grid Metals Corp. (TSX-V:GRDM) (OTCQB:MSMGF) is pleased to announ... READ MORE