The Prospector News

Gunnison Copper Promotes Craig Hallworth to CEO and Strengthens Leadership to Advance Flagship Gunnison Project and Positions for Growth

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Gunnison Copper Promotes Craig Hallworth to CEO and Strengthens Leadership to Advance Flagship Gunnison Project and Positions for Growth

 

 

 

 

 

Senior leadership promotions and technical team additions deepen bench strength to support delivery of the Pre-Feasibility Study and permit amendments for the Gunnison Copper Project

 

Gunnison Copper Corp. (TSX: GCU) (OTCQB: GCUMF) (FSE: 3XS0) is pleased to announce the promotion of Craig Hallworth to President and Chief Executive Officer, alongside a series of senior leadership and technical team additions and promotions designed to strengthen the Company’s capabilities as it advances its flagship Gunnison Copper Project through key de-risking milestones, including the completion of a Pre-Feasibility Study targeted for Q2 2028 and associated permit amendments.

 

Mr. Hallworth previously served as Senior Vice President and Chief Financial Officer, where he led the strengthening of the Company’s balance sheet, including the elimination of secured debt, a significant expansion of its institutional shareholder base, and improvements in the economics of the Gunnison Copper Project. He also led the Company’s strategic repositioning and relaunch as Gunnison Copper, aligning the business with a renewed focus on its flagship asset. He brings deep familiarity with the Company’s asset portfolio and strategy as it enters a critical phase focused on delivering resource expansion and key de-risking milestones, including its metallurgical test program, PFS, and permit amendments.

 

“This promotion reflects the Board’s confidence in Craig’s leadership as the Company enters its next phase,” said Chairman Fred DuVal. “He has been instrumental in strengthening the balance sheet, expanding our institutional shareholder base, and leading the Company’s strategic repositioning as Gunnison Copper. With a strengthened leadership and technical team in place, we believe the Company is well positioned to advance its flagship project through PFS and permitting with discipline and clarity.”

 

Mr. Hallworth is replacing Dr. Stephen Twyerould who has led the company since 2010 and who has decided to step down as President and Chief Executive Officer as part of a planned transition to retirement. Dr. Twyerould will remain on the Company’s Board of Directors. The Board thanks Mr. Twyerould for his leadership in founding and advancing the Company and positioning its flagship project for its next stage of development and growth.

 

“I would like to thank the Board, our shareholders, stakeholders and employees for their support and persistence over the years,” said Dr. Twyerould. “I am incredibly proud of what we have built together and confident the leadership of the Company is in good hands with Craig Hallworth as CEO. The new and existing talent within the organization bodes well for achieving the major milestones set out over the next several years.”

 

In conjunction with Mr. Hallworth’s promotion, the Company has strengthened its leadership across permitting, legal, investor relations, and finance, while also adding key technical capabilities in metallurgy and geology. These appointments and promotions enhance the Company’s ability to execute on critical workstreams, including permitting, stakeholder engagement, metallurgical testing, and resource development, and align the organization with the requirements of the next stage of project advancement.

 

“We have made meaningful progress over the past year and a half, gaining significant momentum in the market, and increasing confidence in our strategy and ability to execute as Gunnison Copper,” said Mr. Hallworth. “With an enhanced leadership and technical team, including key internal promotions in place, we are focused on delivering our Pre-Feasibility Study and permit amendments, while continuing to advance the project toward construction and production of finished copper for the US domestic market.”

 

The Company also announced that Brian Penney will be nominated to join its Board of Directors at the Company’s Annual General Meeting scheduled for June 25, 2026. Mr. Penney is a seasoned mining executive with extensive experience in building and operating large-scale mining operations, he is currently CEO of Tacora Resources and was previously CEO of Baffinland Iron Mines. He brings deep expertise in project development, operations, and financing, further strengthening the Company’s governance and oversight as it advances its flagship project.

 

Mr. Hallworth’s promotion will be effective May 15, 2026 and at that time Fabio Rocha will be appointed as Interim Chief Financial Officer. The Company intends to undertake a process to appoint a permanent Chief Financial Officer.

 

Leadership Appointments and Promotions

 

The following leadership appointments and promotions reflect the Company’s focus on strengthening permitting, technical, regulatory, and capital markets capabilities:

 

Matt Bingham, appointed Senior Vice President, Permitting & External Affairs. Mr. Bingham is a mining and environmental attorney with deep expertise in U.S. permitting, public lands, and government relations. He previously held senior roles at Hudbay Minerals, where he led legal, permitting, and public affairs efforts for the Copper World project.

 

Olen Aasen, promoted to General Counsel & Corporate Secretary. Mr. Aasen is a corporate and securities lawyer with over 20 years of experience advising public companies across mining and other industries. He began his career at Blake, Cassels & Graydon LLP and will oversee the Company’s legal, governance, and compliance functions. Mr. Aasen’s appointment as Corporate Secretary will be effective June 1, 2026.

 

Melissa Mackie, promoted to Vice President, Investor Relations & Communications. Ms. Mackie has led the Company’s investor relations and communications strategy since July 2025, significantly expanding investor engagement and market awareness. She brings over 10 years of experience in capital markets and investor communications within the mining sector.

 

Fabio Rocha, promoted to Interim Chief Financial Officer. Mr. Rocha has experience in financial leadership roles within the mining sector and will support the Company’s financial strategy during this transition period. Prior to his promotion, Mr. Rocha served as Gunnison Copper’s Director, Accounting & Reporting.

 

Technical Team Additions

 

Ron Nunley, appointed Chief Metallurgist. Mr. Nunley is a seasoned metallurgist with extensive experience in copper processing and heap leach optimization. He previously held roles at Rio Tinto and Freeport McMoran, supporting large-scale copper operations and metallurgical programs focused on improving recoveries and operational efficiency.

 

Perseo Anaya, appointed Chief Geologist. Mr. Anaya is an experienced exploration and resource geologist with a strong track record in copper systems, resource modeling, and advancing projects through technical studies across the Americas. He previously held roles at Agnico Eagle Mines, Goldcorp, and Silver Standard Resources.

 

ABOUT GUNNISON COPPER

 

Gunnison Copper Corp. is a multi-asset pure-play copper developer and producer that controls the Cochise Mining District (the district), containing 12 known deposits within an 8 km economic radius, in the Southern Arizona Copper Belt.

 

Its flagship asset, the Gunnison Copper Project, has a main pit Measured and Indicated Mineral Resource containing over 846.1 million tons with a total copper grade of 0.33% (Measured Mineral Resource of 191.5 million tons at 0.37% and Indicated Mineral Resource of 654.5 million tons at 0.31%).

 

The Strong & Harris satellite deposit, located approximately 1.9 miles from the Gunnison processing facilities, is also included in the mine plan and hosts an Inferred Mineral Resource of 76.1 million tons grading 0.49% total copper (0.32% CuOx) at a 0.07% cutoff, 0.56% zinc and 0.12% silver, containing approximately 740 million pounds of copper, including 483 million pounds of oxide copper, as well as zinc (856 million pounds) and silver (9.0 million ounces).

 

A preliminary economic assessment was completed in March 2026 for the Gunnison Project yielding robust economics including an NPV8% of $2 billion, IRR of 23%, and payback period of 3.9 years. It is being developed as a conventional operation with open pit mining, heap leach, and SX/EW refinery to produce finished copper cathode on-site with direct rail link. The PEA is preliminary in nature and includes Inferred Mineral Resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves. There is no certainty that the conclusions reached in the PEA will be realized. Mineral Resources that are not Mineral Reserves do not have demonstrated economic viability.

 

In addition, Gunnison’s Johnson Camp Asset, which is now in production, is fully funded by Nuton LLC, a Rio Tinto Venture, with a production capacity of up to 25 million lbs of finished copper cathode annually.

 

Other significant deposits controlled by Gunnison in the district, with potential to be economic satellite feeder deposits for Gunnison Project infrastructure, include South Star, and eight other deposits.

 

Posted May 11, 2026

Share this news article

MORE or "UNCATEGORIZED"


Critical Metals Corp Achieves Breakthrough Tanbreez Heavy Rare Earth Results: >99% Dissolution of Eudialyte Concentrate Into 19 Ultra-High-Purity Rare Earth Products; Refinery Study Projects US$1.8–2.2b in Annual Refinery Revenue

Critical Metals Corp. (Nasdaq: CRML) a leading critical minerals ... READ MORE

September 16, 2026

Metalsource Mining Extends High Grade Mineralization at Depth as Silver Hill Exploration Enters Major Expansion Phase

Holes SH26-22 and SH26-23 return up to 930 g/t AgEq within broade... READ MORE

September 16, 2026

Pasinex Completes Sale of High-Grade Zinc Sulphide Material and Provides Pinargozu Operations Update

Pasinex Resources Limited (CSE: PSE) (FSE: PNX) a growing zinc-fo... READ MORE

September 16, 2026

Aya Gold & Silver Reports High-Grade Silver Exploration Results Near Pit and at Depth at Zgounder

Aya Gold & Silver Inc. (TSX: AYA; NASDAQ: AYA) is pleased to... READ MORE

September 16, 2026

New Break Resources Ltd. (CSE: NBRK) (OTCQB: NBRKF) (FSE: O91) has received results from the last four holes of a ten-hole, 1,996 metre summer drilling program in the Zavitz gold zone at the Company's 100% owned Moray gold project. In total, New Break has completed 5,372 metres of drilling in 32 drillholes in 2026. Moray is located 49 km southeast of Timmins, Ontario and 32 km northwest of the Young-Davidson gold mine operated by Alamos Gold Inc. Select results from the final four of ten holes drilled in the summer drilling program are presented below in Table 1, while drillhole collar locations are detailed in Table 2 in Appendix A. Table 1 – Moray Summer 2026 Final Drill Results Hole ID Length (m) From (m) To (m) Width (1) (m) Au Grade (2) (g/t) NBR-26-29 322.0 77.3 78.8 1.5 0.42 and 138.0 139.1 1.1 0.38 and 162.5 173.3 10.8 (3) 1.61 and 227.4 229.0 1.6 1.21 and 231.5 232.1 0.6 1.72 NBR-26-30 250.0 37.0 38.0 1.0 0.30 and 102.8 103.5 0.7 0.60 and 121.5 122.5 1.0 0.36 and 124.5 125.5 1.0 0.33 and 128.5 129.0 0.5 0.90 and 131.0 132.0 1.0 0.36 and 169.8 174.0 4.2 2.65 and 178.0 179.5 1.5 0.77 and 183.5 186.6 3.1 1.22 and 190.0 190.5 0.5 1.06 and 191.5 192.5 1.0 1.48 and 196.0 200.5 4.5 2.53 and 203.5 204.0 0.5 2.15 and 206.5 212.0 5.5 1.57 NBR-26-31 274.0 169.0 170.5 1.5 0.37 and 184.5 186.0 1.5 0.51 and 197.0 200.0 3.0 0.94 and 201.5 202.0 0.5 0.50 and 203.5 210.0 6.5 (3) 3.12 NBR-26-32 352.0 73.5 74.0 0.5 0.44 and 174.0 174.6 0.6 0.52 and 194.0 195.0 1.0 0.66 and 199.8 203.3 3.5 2.29 and 227.3 228.0 0.7 0.97 (1) Intervals are drill intersections and do not necessarily represent true widths. (2) All intervals are presented using a cut-off grade of 0.3 g/t Au and internal dilution of no more than 1.0 metres at grades less than 0.3 g/t Au and assays are not capped (see QA/QC Procedures). (3) Drill core photos shown in Appendix B. Figure 1 – Newly Reported Drillholes NBR-26-29, 30 Figure 2 – Newly Reported Drillholes NBR-26-30, 31, 32 Note: The bottom of NBR-26-30 deviated southeast and is represented in both sections. Figure 1: Section B-B1 incorporates drillholes NBR-26-06, 07, 08, 25, 26, 27, 28, 29 and part of 30. Gold mineralization extends southeast into the syenite as exhibited in NBR-26-29. NBR-26-30 is identified in both sections A-A1 and B-B1 as the drillhole was collared along section A-A1 but deviated southeast, intersecting gold mineralization in the mafic volcanics in section B-B1. Figure 2: A-A1 incorporates drillholes NBR-26-03, 04, 05, 23, 24, 30, 31 and 32. NBR-26-31 exhibits gold mineralization both within the syenite (at the contact) and within a "flow breccia" within the hematite altered mafic volcanic at the contact. NBR-26-32 is typified by blocky faulted ground with lamprophyre dykes and gold mineralization in the hematite altered mafic volcanics in a brecciated quartz vein with angular syenitic fragments. William Love, Chief Executive Officer of New Break commented, "Ongoing drilling this summer in the Zavitz gold zone continues to deliver significant gold values, with gold mineralization intercepted in every drillhole. As depicted in Figures 1 and 2, gold mineralization has been encountered predominantly within the mafic volcanics. Importantly, drillholes NR-26-29 and NR-26-32, the deepest drilled to date, demonstrate that gold mineralization extends into the syenite to the southeast at the contact with the mafic volcanics." He further noted, "The intrusive-mafic volcanic contact in the Zavitz gold zone has a distinctive magnetic high. This could be reflective of the higher proportion of iron in these mafic volcanics, which is associated with the higher gold values. This same magnetic and IP signature has been identified elsewhere in areas also believed to be along the intrusive-mafic volcanic contact. Drilling these never before tested targets with the goal of identifying gold mineralization similar to that encountered in the Zavitz zone represents the potential for significantly expanding the Moray gold discovery. There is also the belief that the Zavitz zone could represent the first of a series of stacked mineralized gold zones, which would point to the potential for a much larger gold system at depth. We plan to test this through deeper drilling directly into the Zavitz zone." About the Moray Gold Project The Moray property is located in the heart of the Ontario Abitibi greenstone belt, 49 km southeast of Timmins surrounded by a number of significant gold producing companies and existing mills (see Figure 3). The Young-Davidson gold mine operated by Alamos Gold Inc., with its 8,000 tonne per day mill is the closest and within a short trucking distance of approximately 45 km by road from Moray. The understanding of gold mineralization at Moray continues to evolve with each round of drilling. The occurrence of gold mineralization extending into the syenite to the southeast of the Zavitz zone and in the deepest drillholes is noteworthy given the presence of syenite-hosted mineralization at Young-Davidison. More recent examination of the drill core also suggests that the gold mineralization discovered to date may resemble an intrusion related style of deposit like Agnico Eagle's Upper Beaver gold deposit east of Kirkland Lake, as opposed to a structurally hosted gold system. Both Young-Davidson and Upper Beaver host multi-million ounce gold deposits. Figure 3 – Moray Location Map: Surrounding Gold Producers and Upper Beaver Gold Project Technical Content and Qualified Person The scientific and technical information contained in this news release has been reviewed and approved by Peter C. Hubacheck, P. Geo, consulting geologist to New Break, and an independent Qualified Person as defined by National Instrument 43-101. Mr. Hubacheck certifies that this news release fairly and accurately reflects the technical information and data presented. New Break conducts its exploration activities in accordance with CIM Best Practices Guidelines. QA/QC Procedures QA/QC procedures were executed to ensure all work is conducted in accordance with best practices. All drill core was sawn in half with one half of the core prepared for shipment and the other half retained for future verification. All core is under watch from the drill site to the core processing facility. Drill core is BQTK size and sample intervals range from 0.5 metres to 1.0 metres in length. Commercially prepared certified reference material ("CRM") standards and blanks were inserted with each shipment at a rate of 1 QAQC sample in every 12 core samples. Samples from New Break's 2026 Moray drilling program were analyzed at Activation Laboratories in Timmins, Ontario, which is ISO 17025 certified, by 30-gram fire assay with atomic absorption finish. Any sample assaying greater than 10.0 g/t Au was re-assayed with fire assay gravimetric analysis. Grade composite intervals over core lengths are calculated using a weighted average grade with a cut-off grade of 0.3 g/t Au. Up to 1.0 m of internal dilution (consecutive interval below cut-off grade) are included within specific geologic domains and alteration assemblages, except as otherwise noted. The composites are constrained geologically by metasomatic alteration processes sourcing from the Fiset syenite intrusion and contact mafic volcanic rocks. Elevated gold values are coincident with hematite, silica, sericite and pyrite mineralization within structurally prepared brecciated corridors flanking the intrusion. Intervals are not true widths and no top cutting has been applied to the higher gold values. About New Break Resources Ltd. New Break is a Canadian mineral exploration company focused on its Moray gold project located 49 km southeast of Timmins, Ontario, in a well-established mining camp within proximity to existing infrastructure, and 32 km northwest of the Young-Davidson gold mine, operated by Alamos Gold Inc. Shareholders are also leveraged to exploration success in Nunavut, Canada, through New Break's 20% carried interest in the Sundog gold project and ownership of 6.0 million shares of Guardian Exploration Inc. (TSXV: GX). The Company is supported by a highly experienced team of mining professionals. Appendix A – Drillhole Data and Locations Table 2 – Moray Summer 2026 Drillhole Collar Locations Hole ID Length (m) UTM Easting UTM Northing UTM Elevation Azimuth (degrees) Dip (degrees) NBR-26-29 322.0 492703 5320285 363 220 -70 NBR-26-30 250.0 492708 5320329 363 220 -47 NBR-26-31 274.0 492708 5320329 363 220 -60 NBR-26-32 352.0 492708 5320329 363 220 -70 Total 1,198.0 Coordinates are reported in UTM Zone 17 North, with units in metres. Figure 4 – Zavitz Gold Zone – Surface Traces of 2025 and 2026 Drillholes. All of the drilling at Moray has been completed by Enviro North Exploration Inc. out of Sturgeon Falls, Ontario. Drilling in the Zavitz gold zone is shown in figure 4, with the 1,996 metres in 10 holes drilled this summer depicted in red, the 2,807 metres in 20 holes drilled from January to April 2026 shown in blue and the 1,817 metres in 8 holes drilled in 2025 shown in black. In total, 6,620 metres in 38 drillholes have been completed in the Zavitz gold zone, while New Break has completed a total of 5,372 metres in 32 drillholes of our planned 2026, 10,000 metre drilling program. Appendix B – Drill Core Photos From NBR-26-29 and NBR-26-31

New Break Resources Ltd. (CSE: NBRK) (OTCQB: NBRKF) (FSE: O91) ha... READ MORE

September 16, 2026

Copyright 2026 The Prospector News