The Prospector News

Great Bear Drills Multiple High-Grade Gold Veins in Hinge Zone Including 30.15 g/t Gold Over 7.25m

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Great Bear Drills Multiple High-Grade Gold Veins in Hinge Zone Including 30.15 g/t Gold Over 7.25m

 

 

 

 

 

Great Bear Resources (TSX-V: GBR) reported drill results from the Dixie Hinge Zone and Dixie Limb Zone at its 100% owned Dixie Project in the Red Lake District of Ontario. 

Drilling continues to test along strike and at depth of the DHZ.  Some of the DHZ drill holes also cross the adjacent DL at shallow depths and hence Great Bear is able to test both zones with the same drill holes.

Hinge Zone drill results are provided in Table 1.  Highlights of current drilling include:

 

  • Drill hole DHZ-031 intersected four significant gold bearing quartz veins along a 141 metre wide zone of increased quartz veining and alteration in the DHZ vein system.
  • Gold-bearing vein intercepts from DHZ-031 include:
    • a)  7.25 metres of 30.15 g/t gold, which includes 1.50 metres of 130.49 g/t gold,
    • b)  4.00 metres of 11.72 g/t gold, and
    • c)  0.50 metres of 60.72 g/t gold.
  • The high grade intercepts in DHZ-031 occur 20-60 metres west of previously reported drill hole DHZ-023 which included 3.40 metres of 31.60 g/t gold (see news release of February 21, 2019). 
  • 26 of 42 drill holes (62%) completed by Great Bear along 240 metres of strike length of the DHZ that has been drilled to date have intersected intervals containing greater than 15 g/t gold.
  • Results of shallow drilling of the Dixie Limb Zone are also provided in Table 2.  Highlights include 39.20 metres of 2.07 g/t gold starting at approximately 25 metres depth, including 9.20 metres of 5.43 g/t gold which includes 0.70 metres of 20.46 g/t gold.

 

Chris Taylor, President and CEO of Great Bear said, “The Hinge Zone continues to rapidly expand as we keep stepping out along strike and at depth.  In our most recent results, drill hole DHZ-031 intersected a gold-bearing quartz vein network consisting of multiple high grade veins within a 141 metre (462 foot) wide drill interval.  All current drilling is designed to cross the Hinge Zone at approximately right angles, meaning the interval widths are approximate true widths.  The vertical depth of the DHZ-031 intervals ranges from approximately 60 to 190 metres from the surface.  The scale and strength of near-surface multi-veined gold mineralization at the Hinge Zone continues to impress.”

An updated long section through the Hinge Zone is provided in Figure 1, showing the location of current reported drill intercepts.  Images of high grade gold mineralization from DHZ-031 are shown in Figure 2.

 

The Company continues to undertake a fully funded, 30,000 metre drill program that is expected to continue through 2019.  In order to accelerate the program, a second drill rig was added in early 2019.  Approximately 13,000 metres of drilling remain in the current program.
 

 

Table 1: Most recent drill results from Hinge Zone drilling.

 

 

Drill Hole   From
(m)
To
(m)
Width*
(m)
Gold
(g/t)
Vein Vertical Depth (m)
DHZ-026   269.10 271.10 2.00 8.07 1 218
including 269.10 269.60 0.50 24.27
DHZ-027 Anomalous  
DHZ-028   192.00 192.50 0.50 4.63 1 165
and 206.20 208.25 2.05 10.94 2 177
including 206.20 207.20 1.00 22.07
and including 206.70 207.20 0.50 41.27
DHZ-029   174.80 175.30 0.50 32.60 1 158
and 222.00 227.50 5.50 2.01 2 201
including 226.50 227.50 1.00 6.27
and 248.60 257.70 9.10 3.52 3 224
including 248.60 249.90 1.30 21.02
and including 248.60 249.40 0.80 34.06
DHZ-030   156.40 159.30 2.90 1.63 1 140
including 158.80 159.30 0.50 4.90
and 170.90 171.60 0.70 4.97 2 153
DHZ-031   68.50 70.00 1.50 5.91 1 64
and 136.50 143.75 7.25 30.15 2 128
including 136.50 141.00 4.50 48.47
and including 136.50 139.75 3.25 66.62
and including 136.50 138.50 2.00 99.73
and including 137.00 138.50 1.50 130.49
and 181.00 181.50 0.50 60.72 3 169
and 198.00 209.50 11.50 4.36 4 191

* reported width is determined to be 90-95% of true width based on intersection points of the drill hole intercept with the geological model and oriented drill core data.
 

 

Drilling in the Dixie Limb continues to define shallow, wide intervals of gold mineralization, including high grade sub-intervals. The DL drill intervals are presented separately in Table 2.  As drill holes like DHZ-026 are collared north of the DL and drill southwards into the DHZ at depth, these holes carry intervals from both zones. 

Two exploratory step-out drill holes, DL-038 and DL-039 have encountered a new gold-mineralized silicified sediment zone similar to the DL.  These holes were drilled from the DL across the D2 axial planar fault that divides the DL from the DHZ towards the south, into an area east of the DHZ.  Results are included along with DL drill results in Table 2.  These intercepts may represent a new zone of gold mineralized sediments, or may be an offset continuation of the Dixie Limb Zone in the footwall of the fault.  Follow-up drilling is required to characterize this new discovery.

Two exploratory step-out drill holes, DHZ-024 and DHZ-025 were also completed east of the Hinge Zone fold closure (outside of the Hinge Zone) and encountered anomalous gold values of 0.92 metres of 1.46 g/t gold and 0.50 metres of 1.52 g/t gold, respectively, confirming gold is also present in this new area.  Follow-up drilling is required to determine if significant gold-bearing quartz veining is also developed in this new area.
 

 

Table 2: Current drill results from the Dixie Limb Zone.

 

 

Drill Hole   From
(m)
To
(m)
Width*
(m)
Gold
(g/t)
Vertical Depth (m)
DHZ-026   40.80 80.00 39.20 2.07 34
including 56.80 80.00 23.20 3.19 47
and including 64.00 76.20 12.20 4.87
and including 67.00 76.20 9.20 5.43 56
and including 67.00 69.50 2.50 7.68
and including 74.50 76.20 1.70 11.62 62
and including 75.50 76.20 0.70 20.46
DHZ-027   48.50 63.15 14.65 1.12 43
including 61.15 63.15 2.00 5.19 54
and 72.40 85.00 12.60 3.45 64
DL-038**   347.55 349.05 1.50 0.34 324
DL-039**   219.75 224.75 5.00 2.27 195

 

*All reported widths are drill indicated core length.  Insufficient data has been collected at this time to determine true widths.  **These drill holes have intersected mineralized sediments in the footwall of the local D2 axial planar fault located south the DL, and east of the DHZ.  They may represent a new zone, or offset continuation of the DL.

 

Figure 1: Composite Long section through the DHZ (view to north) as drilled to-date showing currently reported drill results, and the location of recent step-out drilling.  New results are highlighted in yellow.

 


 

 

Figure 2: Images of high grade gold in drill core from DHZ-031.  Interval returned 1.50 metres of 130.49 g/t gold.

About Great Bear
 

The Dixie property is located approximately 15 minutes’ drive along Highway 105 from downtown Red Lake, Ontario.  The Red Lake mining district has produced over 30,000,000 ounces of gold and is one of the premier mining districts in Canada, benefitting from major active mining operations including the Red Lake Gold Mine of Goldcorp Inc., plus modern infrastructure and a skilled workforce.  The Dixie property covers a drill and geophysically defined 10 kilometre gold mineralized structure similar to that hosting other producing gold mines in the district.  In addition, Great Bear is also earning a 100% royalty-free interest in the West Madsen, Pakwash, Dedee and Sobel properties, which cover regionally significant gold-controlling structures and prospective geology.  All of Great Bear’s Red Lake projects are accessible year-round through existing roads.
 

Drill core is logged and sampled in a secure core storage facility located in Red Lake Ontario.  Core samples from the program are cut in half, using a diamond cutting saw, and are sent to SGS Canada Inc. in Red Lake, Ontario, and Activation Laboratories in Ancaster Ontario, both of which are accredited mineral analysis laboratories, for analysis. All samples are analysed for gold using standard Fire Assay-AA techniques. Samples returning over 3.0 g/t gold are analysed utilizing standard Fire Assay-Gravimetric methods. Selected samples with visible gold are also analyzed with a standard 1kg metallic screen fire assay.  Certified gold reference standards, blanks and field duplicates are routinely inserted into the sample stream, as part of Great Bear’s quality control/quality assurance program (QAQC).  No QAQC issues were noted with the results reported herein.

Mr. R. Bob Singh, P.Geo, Director and VP Exploration, and Ms. Andrea Diakow P.Geo, Exploration Manager for Great Bear are the Qualified Persons as defined by National Instrument 43-101 responsible for the accuracy of technical information contained in this news release.

Posted March 21, 2019

Share this news article

MORE or "UNCATEGORIZED"


Canada Carbon Receives Full Assay Results on its Asbury Property, Including 12.25%Cg over 22.50 Metres

Canada Carbon Inc. (TSX-V:CCB) (FF:U7N1) is pleased to announce i... READ MORE

March 18, 2024

enCore Energy Encounters Highest Grade Drill Results at Alta Mesa Uranium Project; Provides Status on South Texas Production Operations

enCore Energy Corp. (NASDAQ: EU) (TSX-V: EU) a domestic uranium ... READ MORE

March 18, 2024

Canada Nickel Makes New Discovery at Newmarket Property, Achieves Best Drill Results at Reid to Date and Announces Grant of Options and RSUs

Highlights First two holes at Newmarket successfully intersect ta... READ MORE

March 18, 2024

Imperial Reports 2023 Financial Results

Imperial Metals Corporation (TSX:III) reports financial results f... READ MORE

March 15, 2024

Outcrop Silver Announces Closing $3.45 Million Public Offering, Including the Full Exercise of the Over-Allotment Option

Outcrop Silver & Gold Corporation (TSX-V: OCG) (OTCQX: OCGSF)... READ MORE

March 14, 2024

Copyright 2024 The Prospector News