The Prospector News

Goliath Drilling Intersects High Grade in East Expansion Target and Drills 20.8m of 3.4 g/t Au in Main Zone

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Goliath Drilling Intersects High Grade in East Expansion Target and Drills 20.8m of 3.4 g/t Au in Main Zone

 

 

 

 

 

Treasury Metals Inc. (TSX: TML) is pleased to announce the first assay results from its expansion drilling in the Eastern Main Zone and additional assays from the Infill drilling in the Main Zone at the Goliath Gold Project located in northwestern Ontario.

 

Highlights include:

 

  • TL20-524 intersected 3.4 g/t over 20.8 m including 9.1 g/t Au over 4.0 m in the Main Zone Infill program. TL20-524 exhibits anticipated results of an extended mineralized zone with high-grade assays.
  • Expansion drill hole TL20-517 intersected 4.6 g/t Au over 4.4 m in the Main Zone and 10.6 g/t Au over 1.0 m in a hanging wall zone
  • Expansion drill hole TL20-512 intersected 3.0 g/t Au over 7.0 m including 5.4 g/t Au over 3.4 m

 

“We are encouraged with these new Main Zone results that further demonstrate the consistency of mineralization across the high-grade shoots in the deposit. This complements the program’s success in the developing C Zone East area spanning 200 metres along strike by 150 metres down-dip where drilling is now consistently hitting mineralization in both zones (Main and C Zone) along strike. These drill results along with the Federal Minister’s approval of the EA in August positions us well in an improving gold market,” stated Greg Ferron, CEO.

 

Eastern Main Zone Expansion Drilling:

 

Treasury is pleased to announce the first results of its expansion drill program of the high-grade shoots within the Main Zone. These holes were designed to drill test select targets down-dip, along strike and directly adjacent to the existing high-grade shoots as well as areas identified by recent underground mine scheduling modelling work. These targets have the potential to add ounces adjacent or below the currently defined resources (see image for additional details).

 

TL20-517, which was targeted to expand the lower eastern portion of the Eastern high-grade shoot within the Main Zone, intersected 4.6 g/t Au over 4.4 m with an additional hanging wall zone that found 10.6 g/t Au over 1.0 m.

 

TL20-512, located 100 metres up-dip of TL20-517, intersected 3.0 g/t Au over 7.0 m including 5.4 g/t Au over 3.4 m directly adjacent to the East high-grade shoot.  Additionally, TL20-514 found a wide, low grade intersection of 0.6 g/t over 17.7 m within the Main Zone and 8.9 g/t Au over 1.3 m in a hanging wall zone. The results of these holes have shown good continuity of the mining zones.

 

Infill Program:

 

A portion of the program has been focused on upgrading specific areas of the Main Zone shoots to the “Measured” classification for inclusion as potential estimate ounces for the initial mine life years and for grade control purposes.  Each of the reported holes have shown very good continuity of the mineralized areas with high grade.

 

TL20-524 intersected 3.4 g/t over 20.8 m including 9.1 g/t Au over 4.0 m in the Main Zone Infill program and is located 30 metres down dip of previously reported TL19-507 which intersected 2.37 g/t Au over 19.0 m including 6.2 g/t Au over 4.0 m (see press release January 13, 2020). TL20-524 exhibits anticipated results of an extended mineralized zone with significant high-grade assays.  This hole shows strong encouragement of the grade across the main area of the potentially mineable resource and adds to the confidence of mining zones for early years in the proposed production schedule.

 

 

                                                Table 1: Drill Hole Intercepts

 

 

Drill Hole Target Zone From (m) To (m) Sample Length

 (m)

Grade g/t
Au
TL19-512 Main Main 570.00 577.00 7.00 3.04*
    Including 572.80 576.20 3.40 5.40*
    Main 580.80 584.40 3.60 0.80
TL20-514 Main HW 154.80 156.10 1.30 8.86*
    Main 528.70 546.40 17.70 0.59
TL20-517 Main HW 454.00 460.00 6.00 2.42*
    Including 454.00 455.00 1.00 10.6*
    HW 531.00 533.00 2.00 1.14
    Main 658.60 663.00 4.40 4.64*
TL20-524 Main Main 274.20 295.00 20.80 3.44
    Including 281.00 288.00 7.00 2.83
    Including 291.00 295.00 4.00 9.06
    Including 292.00 293.00 1.00 28.60
For duplicate samples, an average of the two gold assays are used to calculate the intersection grade; all grades un-cut, no-capping
Holes are generally drilled 350-0° Azimuth with inclinations ranging -65 to -80°
All assays are rounded to two decimal places
Intervals do not indicate true widths
*Metallic Screen Fire Assay Results

 

Qualified Person

 

Technical information in this press release has been reviewed and approved by Adam Larsen, P. Geo, who is the qualified person under the definitions established by National Instrument 43-101.

 

About Treasury Metals Inc.

 

Treasury Metals Inc. is a gold focused exploration and development company with assets in Canada and is listed on the Toronto Stock Exchange and on the OTCQX® Best Market.

 

QA/QC Program:

 

The Company has implemented a quality assurance and quality control (QA/QC) program to ensure sampling and analysis of all exploration work is conducted in accordance with the CIM Exploration Best Practices Guidelines. The drill core is sawn in half with one-half of the core sample dispatched to Actlabs facility located in Dryden, Ontario. The other half of the core is retained for future assay verification and/or metallurgical testing. Other QA/QC procedures include the insertion of blanks and Canadian Reference Standards for every tenth sample in the sample stream. A quarter core duplicate is assayed every 20th sample. The laboratory has its own QA/QC protocols running standards and blanks with duplicate samples in each batch stream.  Additional checks are routinely run on anomalous values including gravimetric analysis and pulp metallic screen fire assays. Gold analysis is conducted by lead collection, fire assay with atomic absorption and/or gravimetric finish on a 50 gram sample. Check assays are conducted at a secondary ISO certified laboratory (in this case AGAT Laboratories located in Mississauga, Ontario).  Metallic screen fire assaying is now completed using a 1.0 kg sample and four 50 gm fire assays of the pass (-100 mesh) pulverized material.

 


Figure 1: Goliath Gold Project Main and C Zone expansion areas (CNW Group/Treasury Metals Inc.)

 

Posted March 10, 2020

Share this news article

MORE or "UNCATEGORIZED"


Altius Commits to $21 Million Investment in ARR

Altius Minerals Corporation (TSX: ALS) (OTCQX: ATUSF) is pleased... READ MORE

December 2, 2022

Midland Completes the Second Tranche of a Private Placement Totalling $3.5M

Midland Exploration Inc. (TSX-V: MD) is pleased to announce that ... READ MORE

December 2, 2022

Chibougamau Independent Mines Drilling at Berrigan Intersects Wide Mineralized Zones

Chibougamau Independent Mines Inc. (TSX-V:CBG)  (FRA:CLL1) (OTC:... READ MORE

December 2, 2022

Apollo Reports First Assay Results From Phase 2 Drilling

Silver Mineralization Continues to Expand Beneath Current Resourc... READ MORE

December 2, 2022

Orezone Declares Commercial Production at the Bomboré Gold Mine

Orezone Gold Corporation (TSX: ORE) (OTCQX: ORZCF)  is pleased t... READ MORE

December 2, 2022

We acknowledge the [financial] support of the Government of Canada.

Government of Canada Supported
Copyright 2022 The Prospector News