The Prospector News

Goliath Discovers 21.5 oz/t AuEq In Volcanics From Bonanza-Grade Outcrop Recovered From Within A New >500 Meter Shear Zone With The Same High-Grade Gold Mineralizing System As Surebet, Bonanza and Golden Gate Zones

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Goliath Discovers 21.5 oz/t AuEq In Volcanics From Bonanza-Grade Outcrop Recovered From Within A New >500 Meter Shear Zone With The Same High-Grade Gold Mineralizing System As Surebet, Bonanza and Golden Gate Zones

 

 

 

 

 

NEW HIGH-GRADE GOLD-SILVER JACKPOT ZONE HIGHLIGHTS:

  • The Geological team used the same method to find Jackpot as was used to make the initial Surebet Zone discovery that has 2.1 kilometers of mineralization exposed at surface with 700 meters of vertical relief; focusing on structures previously covered by glaciers that allowed the team to test outcrops exposed due to receding glaciers.
  • Sample ST116183 assayed 21.5 oz/t AuEq or 667.40 gpt AuEq (636.00 gpt Au, 1,690.00 gpt Ag, 7.96 % Cu, 2.22 % Pb) and comes from a 30 cm wide quartz vein with 15 % chalcopyrite, 7 % pyrite, and 1 % galena hosted in a shear comprised of strongly silicified Porphyritic Andesite within the Hazelton Volcanics (see image below).
    • An accompanying infographic is available at:

https://www.globenewswire.com/NewsRoom/AttachmentNg/c2d53f5a-9c18-4ac2-87d2-b1bf7dfdaf5e

  • The sample is part of the new high-grade Jackpot discovery consisting of at least 10 shear hosted quartz-sulphide veins within a 15 meter wide stockwork that extends for 50 meters along strike before being covered by overburden on either side and remains open.
  • The stockwork of veins are near vertical and strike north-south hosted within a broader shear zone that can be traced for more than 500 meters with 400 meters of vertical relief, it remains open.
  • The newly discovered Jackpot outcrop has never been drill tested; located 1 km to the east southeast and 300 meters vertically below Pad A, and 60 meters north above Pad J (see map below).
    • An accompanying infographic is available at:

https://www.globenewswire.com/NewsRoom/AttachmentNg/022bc4e1-073d-4013-9fab-1ce5b2f85c90

  • The newly discovered Jackpot outcrop contains bonanza grades with similar textures, mineralogy, and geochemistry to those observed in the Surebet, Bonanza and Golden Gate Zones that are located 1 km to the west-northwest. It also consists of veins, stockwork and breccia with abundant galena, pyrrhotite, pyrite and chalcopyrite, strongly indicating that it is part of the same mineralizing feeder source as the Surebet discovery.
  • During the last few exploration campaigns, multiple high-grade gold samples have been collected within 150 meters of the new Jackpot outcrop and are believed to be related to Jackpot, including Y607977 that assayed 44.40 gpt Au, 1,629.00 gpt Ag, 5.22 % Cu, 2.24% Pb, Y607989 that assayed 13.50 gpt Au, 32.10 gpt Ag, 0.09 % Cu, 0.42 % Pb and ST112903 that assayed 8.43 gpt Au, 694.00 gpt Ag, 0.39% Cu, 0.47 % Pb (see image below).
  • The mineralization is in the volcanics, approximately 250 meters from the southwestern modeled edge of the Bonanza Shear Zone. It is important to note that some of the highest grades drilled in the Bonanza Shear Zone are at the contact between the sediments and volcanics. It appears the Jackpot Zone could be an extension of the Bonanza Zone or a possible feeder zone in the volcanics below the Bonanza Zone (see images below).
    • An accompanying infographic is available at:

https://www.globenewswire.com/NewsRoom/AttachmentNg/324fa007-065f-4ceb-aa54-da8f5dbc7c4c

  • The newly discovered Jackpot Zone is drill ready and will be tested during the 2024 drill campaign with excellent potential to quickly evolve into another material discovery on the Golddigger property (see image above).
  • The new Jackpot Zone demonstrates the strong untapped potential for additional discoveries on surface and at depth on the Golddigger property. Surebet, Bonanza, Golden Gate and Jackpot are believed to be directly related to the same mineralizing feeder source on the property.

 

GOLDDIGGER ROPERTY HIGHLIGHTS:

  • Golddigger has gone from an extensive outcrop at the Surebet Zone, to drilling 106 holes into it to establish a modeled zone with 6,800,000 m3 with an average grade of 9.04 gpt AuEq. This zone is in the Hazelton Sediments; it remains open.
  • Following on the success at the Surebet Zone, the Bonanza Shear Zone was discovered in 2022, first modeled based on 30 drill holes; after the 2023 drilling season 104 holes have been drilled. The modeled zone has grown to >15,000,000 m3 with an average grade of 8.14 gpt AuEq. The gold mineralization is at the contact between the Hazelton Sediments and Hazelton Volcanics; it remains open.
  • The newest zone drilled into is the Golden Gate Zone. Only minimal drilling has been done in 2023 and we look forward to additional 2024 drilling. It is a tremendously exciting discovery because the gold mineralization is within the Hazelton Volcanics; it remains open.
    • An accompanying infographic is available at:

https://www.globenewswire.com/NewsRoom/AttachmentNg/f988c9fa-2256-4d90-8b4f-fcd482aae33d

  • Based on 222 drill holes into the current models from the work done internally and by independent engineering firm Archer Cathro, the Surebet, Bonanza and Golden Gate zones are estimated at an aggregate of >22,900,000 m3 averaging 7.74 g/t AuEq. It is important to note that several drill holes hit mineralization outside the current models that are currently being added.
  • Drill results and surface sampling demonstrates the existence of multiple extensive stacked bonanza-grade veins, providing for excellent additional discovery potential at depth.
  • Several lines of evidence, including metals and geochemical zonation of trace elements, type and origin of fluids, and age of the mineralization suggest a Porphyry Feeder Source at depth as reported by the Colorado School of Mines.
  • A study in collaboration with the Colorado School of Mines has also confirmed that the mineralization was formed at 4-5 km below the paleo-surface, confirming the excellent additional discovery potential at depth with only 650 meters tested thus far with tremendous success. Note that the depth of this target can potentially be significantly closer to the surface due to erosion and glaciation.
  • To put this into perspective: there is potential for up to 5-10 times the number of stacked veins below the already discovered system, corresponding to 10 times the height of the CN Tower from top to bottom.
  • From initial metallurgical work that has not been fully optimized as yet, the discovery is modeled to be amenable to underground mining, with no deleterious minerals present, environmentally friendly cost-effective mining with exceptional metallurgy; gold recoveries of 92.2% inclusive of 48.8% free gold from gravity alone at a 327-micrometer crush (no cyanide required for gold recovery).
  • With only an aggregate of 12 months boots on the ground, Surebet is clearly demonstrating to be a world class discovery, and we are likely only seeing the tip of the iceberg.
  • Excellent infrastructure 7 km to road, 300-man camp on private property, deep water barge access only 190 km to international container port and rail, 25 km to high tension power.

 

Goliath Resources Limited (TSX-V: GOT) (OTCQB: GOTRF) (FSE: B4IF) is excited to report the discovery of the new high-grade gold-silver Jackpot discovery that assayed 21.5 oz/t AuEq or 667.40 gpt AuEq (636.00 gpt Au, 1690.00 gpt Ag, 7.96 % Cu, 2.22 % Pb) at its 100% controlled Golddigger Property, Golden Triangle, British Columbia. This discovery is part of the same mineralizing system responsible for the mineralization at Surebet, Bonanza and the Golden Gate Zones; all zones remain. It is located 1 kilometer to the east-southeast and 300 meters vertically below Pad A, and 60 meters north above Pad J. The new Jackpot discovery has never been drilled before and will by tested during the 2024 drill campaign (see map above).

 

Sample ST116183 assayed 21.5 oz/t AuEq or 667.40 gpt AuEq (636.00 gpt Au, 1690.00 gpt Ag, 7.96 % Cu, 2.22 % Pb) and comes from a 30 cm wide quartz vein with 15 % chalcopyrite, 7 % pyrite, and 1 % galena hosted in a strongly silicified porphyritic andesite within the Hazelton Volcanics. It was collected in an outcrop consisting of a 15 meter wide stockwork zone that contains at least 10 veins with strong quartz-sulphide mineralization. The stockwork of veins is vertical and strikes north-south where it is exposed for about 50 meters of strike before being covered by overburden on either side; it remains open. It is hosted within a broader shear zone that can be traced for >500 meters in a north-south direction with 400 metres of vertical relief and remains open.

 

During the last few exploration campaigns, multiple high-grade gold samples have been collected within 150 meters of the new Jackpot showing, including Y607977 assaying 44.40 gpt Au, 1629.00 gpt Ag, 5.22 % Cu, 2.24% Pb, Y607989 assaying 13.50 gpt Au, 32.10 gpt Ag, 0.09 % Cu, 0.42 % Pb and ST112903 assaying 8.43 gpt Au, 694.00 gpt Ag, 0.39% Cu, 0.47 % Pb, making this a very interesting drill target to take into consideration for the expansion of the Surebet system that remains open (see images above).

 

The new Jackpot discovery has similar textures, mineralogy, and geochemistry to those observed in the Surebet, Bonanza and the Golden Gate Zones, consisting of veins, stockwork and breccia with considerable amounts of galena, pyrrhotite, pyrite and chalcopyrite, indicating that it is part of the same mineralizing system. This new discovery demonstrates the strong potential for the discovery of additional stacked mineralized high-grade shear zones and veins related to the Surebet mineralizing system on the Golddigger property that remains open. The new Jackpot discovery has never been drilled before and will by tested during the 2024 drill campaign.

 

Roger Rosmus, Founder and CEO of Goliath Resources, states:The Golddigger project is a remarkable gold discovery, showing multiple zones that transition from the sediments, into the contact of the sediments and volcanics then into the volcanics. We feel confident that as we drill into the volcanics, we will continue to discover multiple zones that lead us to the heat engine that caused the widespread gold mineralization. It is a true grassroots discovery that was found when the glaciers covering this area receded and exposed the mineralized outcropping zones for our team to find. Pure grassroots gold discoveries are very rare in the gold mining sector. The gold mineralization has excellent continuity and is very predictable as can be seen from the high percentage of gold mineralization in our drill holes, and equally as exciting is the high percentage of visible gold in the drill holes as well as the excellent recovery from our early stage metallurgical work. Jackpot is yet another discovery of outcropping high-grade gold-silver with multiple mineralized veins within a broader shear zone that can be traced for >500 meters with 400 meters of vertical relief which has excellent upside potential for our shareholders. This clearly demonstrates the strong possibility for many more discoveries of material size mineralized shear zones/veins directly related to the Surebet system that remains open. The newly discovered Jackpot outcrop assayed the highest-grade sample ever collected on the property to date returning 21.5 oz/t AuEq or 667.40 gpt AuEq. Of important note, it is hosted in a shear composed of strongly silicified porphyritic andesite within the Hazelton Volcanics that could quickly evolve into our next material bonanza grade and/or porphyry drill discovery on the Golddigger property in 2024. We look forward to the updated modeling being completed internally along side Archer Cathro that will include all drilling completed to date. Additionally, we look forward to announcing results from our inaugural exploration program on Golddigger’s Cambria Icefield Claims in the near future.

 

Golddigger Property

 

The Golddigger Property is 100% controlled covering an area of 64,264 hectares (158,800 acres) and is in the world class geological setting of the Eskay Rift within the Golden Triangle of British Columbia and within 3 kilometers of the ‘Red Line’ that is host to multiple world class deposits.

 

The Surebet discovery has exceptional metallurgy with gold recoveries of 92.2% inclusive of 48.8% free gold from gravity alone at a 327-micrometer crush (no deleterious elements and no cyanide required to recover the gold based on metallurgical work completed to date).

 

It is in an excellent location in close proximity to the communities of Alice Arm and Kitsault where there is a permitted mill site on private property. It is situated on tide water with direct barge access to Prince Rupert (190 kilometers via the Observatory inlet/Portland inlet). The town of Kitsault is accessible by road (190 kilometers from Terrace, 300 kilometers from Prince Rupert) and has a barge landing, dock, and infrastructure capable of housing at least 300 people, including high-tension power.

 

Additional infrastructure in the area includes the Dolly Varden Silver Mine Road (only 7 kilometers to the East of the Surebet discovery) with direct road access to Alice Arm barge landing (18 kilometers to the south of the Surebet discovery) and high-tension power (25 kilometers to the East of Surebet discovery). The city of Terrace (population 16,000) provides access to railway, major highways, and airport with supplies (food, fuel, lumber, etc.), while the town of Prince Rupert (population 12,000) is located on the west coast and houses an international container seaport also with direct access to railway and an airport with supplies.

 

Qualified Person

 

James McCrea P. Geo and Rein Turna P. Geo are the qualified persons as defined by National Instrument 43-101, for Goliath Resource Limited projects, and supervised the preparation of, and has reviewed and approved, the technical information in this release.

 

Other

 

Oriented HQ-diameter or NQ-diameter diamond drill core from the drill campaign is placed in core boxes by the drill crew contracted by the Company. Core boxes are transported by helicopter to the staging area, and then transported by truck to the core shack. The core is then re-orientated, meterage blocks are checked, meter marks are labelled, Recovery and RQD measurements taken, and primary bedding and secondary structural features including veins, dykes, cleavage, and shears are noted and measured. The core is then described and transcribed in MX DepositTM. Drill holes were planned using Leapfrog GeoTM and QGISTM software and data from the 2017-2022 exploration campaigns. Drill core containing quartz breccia, stockwork, veining and/or sulphide(s), or notable alteration are sampled in lengths of 0.5 to 1.5 meters. Core samples are cut lengthwise in half, one-half remains in the box and the other half is inserted in a clean plastic bag with a sample tag. Standards, blanks and duplicates were added in the sample stream at a rate of 10%.

 

Grab, channels, chip, and talus samples were collected by foot with helicopter assistance. Prospective areas included, but were not limited to, proximity to MINFile locations, placer creek occurrences, regional soil anomalies, and potential gossans based on high-resolution satellite imagery. The rock grab and chip samples were extracted using a rock hammer, or hammer and chisel to expose fresh surfaces and to liberate a sample of anywhere between 0.5 to 5.0 kilograms. All sample sites were flagged with biodegradable flagging tape and marked with the sample number. All sample sites were recorded using hand-held GPS units (accuracy 3-10 meters) and sample ID, easting, northing, elevation, type of sample (outcrop, subcrop, float, talus, chip, grab, etc.) and a description of the rock were recorded on all-weather paper. Samples were then inserted in a clean plastic bag with a sample tag for transport and shipping to the geochemistry lab. QA/QC samples including blanks, standards, and duplicate samples were inserted regularly into the sample sequence at a rate of 10%.

 

All samples are transported in rice bags sealed with numbered security tags. A transport company takes them from the core shack to the ALS labs facilities in North Vancouver. ALS is either certified to ISO 9001:2008 or accredited to ISO 17025:2005 in all of its locations. At ALS samples were processed, dried, crushed, and pulverized before analysis using the ME-MS61 and Au-SCR21 methods. For the ME-MS61 method, a prepared sample is digested with perchloric, nitric, hydrofluoric, and hydrochloric acids. The residue is topped up with dilute hydrochloric acid and analyzed by inductively coupled plasma atomic emission spectrometry. Overlimits were re-analyzed using the ME-OG62 and Ag-GRA21 methods (gravimetric finish). For Au-SCR21 a large volume of sample is needed (typically 1-3kg). The sample is crushed and screened (usually to -106 micron) to separate coarse gold particles from fine material. After screening, two aliquots of the fine fraction are analysed using the traditional fire assay method. The fine fraction is expected to be reasonably homogenous and well represented by the duplicate analyses. The entire coarse fraction is assayed to determine the contribution of the coarse gold.

 

The reader is cautioned that grab samples are spot samples which are typically, but not exclusively, constrained to mineralization. Grab samples are selective in nature and collected to determine the presence or absence of mineralization and are not intended to be representative of the material sampled.

 

About Goliath Resources Limited

 

Goliath Resources Limited is an explorer of precious metals projects in the prolific Golden Triangle of northwestern British Columbia and Abitibi Greenstone Belt of Quebec. All of its projects are in world class geological settings and geopolitical safe jurisdictions amenable to mining in Canada.

Posted January 16, 2024

Share this news article

MORE or "UNCATEGORIZED"


Millennial Announces Closing Private Placement for Total Proceeds of $9,188,880

Millennial Potash Corp. (TSX-V: MLP) (OTCQB: MLPNF) (FSE: X0D) is... READ MORE

July 31, 2025

Laramide Resources Announces Closing of Upsized $12,000,000 Private Placement

Laramide Resources Ltd. (TSX: LAM) (ASX: LAM) (OTCQX: LMRXF)  a ... READ MORE

July 31, 2025

SPC Nickel Closes $3.5 Million Rights Offering Backstopped by Dundee Corporation

SPC Nickel Corp. (TSX-V: SPC) and Dundee Corporation (TSX: DC.A) are pl... READ MORE

July 31, 2025

St. Augustine Announces Positive Results of the Kingking Copper-Gold Project Updated Preliminary Feasibility Study

NPV7% of $4.18 Billion After-tax IRR of 34.2% at $4.30/lb Copper ... READ MORE

July 31, 2025

Independence Gold Intersects 52.46 Metres Grading 2.51 g/t Gold and 19.73 g/t Silver in the Johnny Vein at the 3Ts Project, BC Independence Gold Corp. (TSX-V: IGO) is pleased to report assay results from three additional diamond drill holes completed at the Johnny Vein System at the 3Ts Project located in central British Columbia. These results further confirm the continuity and high-grade nature of the Johnny Vein System and expands the known footprint of mineralization. Located approximately 185 kilometres southwest of Prince George, British Columbia, the 3Ts Project comprises thirty-one mineral claims covering approximately 35,486 hectares in the Nechako Plateau region. The project lies 16 km southwest of Artemis Gold Inc.'s Blackwater Mine and hosts a low-sulphidation epithermal quartz-carbonate vein district within which at least nineteen known mineralized veins, ranging from 50 to over 1,100 metres in strike length and true widths of up to 32 m have been identified. Highlights from diamond drilling include: • Hole 3TS-25-31 intersected a broad zone of mineralization grading 2.51 g/t gold and 19.73 g/t silver over 52.46 metres (true width approximately 32m), including: o 2.32m grading 9.83 g/t gold and 28.02 g/t silver o 2.90m grading 7.16 g/t gold and 63.10 g/t silver o 1.14m grading 18.46 g/t gold and 33.33 g/t silver • Hole 3TS-25-29 returned 7.94 metres grading 2.65 g/t gold and 10.71 g/t silver (true width approximately 7.46m), including 1.94 metres of 7.53 g/t gold and 32.47 g/t silver. • Hole 3TS-25-30 returned 5.90 metres of 1.86 g/t gold and 17.29 g/t silver (true width approximately 5.54m), including 0.72 metres of 4.00 g/t gold and 26.39 g/t silver. "These results further validate the Johnny Vein System as a high-grade, laterally extensive target with strong potential for resource expansion," stated Randy Turner, President & CEO of Independence Gold. "We are particularly excited by the width and grade intersected in hole 3TS-25-31, which demonstrates consistent mineralization over more than 30 metres of true width and includes multiple zones of exceptional gold and silver values." The Johnny Vein System is one of several epithermal quartz-carbonate veins being explored at the 3Ts Project and appears to be comprised of several intertwining veins with mineralized breccias that produce wide zones of mineralization. The primary vein set is interpreted to have a true thickness of approximately 32 metres; however, including adjacent mineralized breccias and minor veins, the total mineralized width may extend up to 47.5 metres true width. The Johnny Vein indicates similarities in grade and continuity to the established Ted-Mint and Tommy Vein Systems, which form the foundation of the current 3Ts resource model (please see news release dated August 18th, 2022 for further details; "Technical Report on the Mineral Resource Estimate Update for the 3Ts Gold Project, Omineca Mining Division, British Columbia, Canada", authored by Armitage and Miller). The combined in-pit and underground components of Tommy and Ted-Mint vein systems contain a total inferred resource estimate of 4,469,297 tonnes grading 3.64 grams per tonne gold and 96.26 g/t silver, at a cut off grade of 0.4 g/t gold equivalent ("AuEq") in-pit and 2.0 g/t AuEq underground, containing 522,330 ounces of gold and 13,831,415 ounces of silver, totaling 678,156 AuEq ounces. Drill results from the Johnny Vein System will be incorporated in the updated NI 43-101 mineral resource anticipated to be completed in the third quarter of 2025. Drill Hole From (m) To (m) Interval (m) Gold (g/t) Silver (g/t) 3TS-25-29 4.00 6.00 2.00 1.15 9.50 and 10.00 11.80 1.80 0.61 3.89 and 20.92 21.66 0.74 2.85 9.46 and 25.66 27.53 1.87 4.09 20.32 and 33.00 38.00 5.00 1.22 2.40 and 44.06 52.00 7.94 2.65 10.71 including 44.06 46.00 1.94 7.53 32.47 3TS-25-29 63.17 63.68 0.51 1.10 13.73 and 66.00 66.70 0.70 1.71 28.57 and 71.00 74.00 3.00 0.75 15.33 and 80.68 86.58 5.90 1.86 17.29 and 88.00 91.00 3.00 0.80 2.00 and 102.70 104.88 2.18 2.03 4.13 3TS-25-31 65.05 66.50 1.45 4.68 5.52 and 67.69 68.10 0.41 6.24 4.88 and 73.54 126.00 52.46 2.51 19.73 including 79.18 81.50 2.32 9.83 28.02 and including 87.10 90.00 2.90 7.16 63.10 and including 109.36 110.50 1.14 18.46 33.33 and 155.00 156.54 1.54 1.82 5.84 Table 1: Significant Intercepts from the Johnny Vein *The true widths of the veins are average 80-95% of the reported interval width QA/QC Protocols Samples consist of saw-cut (NQ) drill core with one-half retained for reference and one-half submitted for analysis. Samples were submitted in sealed plastic bags delivered to Bandstra Transportation for shipping to SGS Natural Resources Canada (SGS) labs in Burnaby, British Columbia, for sample preparation and analysis. Robotic sample preparation is used to ensure reproducibility and samples are pulverized to greater than 85% passing 75 microns. All samples are submitted for four acid digest with an ICP finish. Gold grades are obtained by fire assay with AAS finish. Samples which return greater than 10 parts per million gold and 100 parts per million silver are resubmitted for fire assay with a gravimetric finish. Sample batches consist of core samples, control standards, blanks and duplicates. Blanks and control standards (QAQC) are inserted into each batch of samples, with one QAQC per 20 samples. QAQC samples that return values 10% outside of the expected range require samples from that internal batch to be rerun by the lab. SGS laboratories operate under a Quality Management System that complies with ISO/IEC 17025. SGS's minerals laboratory in Burnaby is accredited by the Standards Council of Canada (SCC) for specific mineral tests listed on the scope of accreditation to the ISO/IEC 17025 standard. Please see SGS Analytical Methods for further details regarding analytical procedures. About Independence Independence Gold Corp. is a well-financed mineral exploration company with holdings ranging from early-stage grassroots exploration to advanced-stage resource expansion in British Columbia and Yukon. The Company is positioned to add shareholder value through systematic project advancement, while management continues to evaluate additional gold and silver projects for possible acquisition. For additional information, visit the Company's website www.ingold.ca. Andy Randell, P.Geo., the Company's Qualified Person as defined by National Instrument 43-101 and who is an independent consultant for the Company, has reviewed the technical information in this news release. Drill Hole Information from this release Drill Hole Easting Northing Elevation Azimuth* Dip Total Meterage 3TS-25-29 363045 5876905 1218 170 70 144 3TS-25-30 363067 5876940 1216 270 70 106 3TS-25-31 363067 5876940 1216 220 65 158 * All drill hole locations are in NAD83, Zone 10 Datum **Based on true north. For magnetic declination add 17.5 degrees

Independence Gold Corp. (TSX-V: IGO) is pleased to report assay r... READ MORE

July 31, 2025

Copyright 2025 The Prospector News