The Prospector News

Golden Minerals Drills 24m Grading 6.7 g/t Au at its Rodeo Gold Project, Durango, Mexico

You have opened a direct link to the current edition PDF

Open PDF Close

Share this news article

Golden Minerals Drills 24m Grading 6.7 g/t Au at its Rodeo Gold Project, Durango, Mexico






Golden Minerals Company (NYSE American:AUMN) (TSX: AUMN) announced it has received a second set of assay results from its resource definition drill program at the Rodeo gold-silver project located in Durango State, Mexico. 


Assay results from an additional 11 diamond drill holes show wide zones of high-grade near-surface gold mineralization. Mineralized material consists of highly silicified epithermal veins and breccias hosted in felsic volcanic rocks. Significant results are summarized in the table below, with complete results available on the Company website. [link]



Hole ID Dip Azimuth Hole
Au (g/t) Ag (g/t)
RDO_20_010 -55 240 40 12.8 28.9 16.1 2.91 8.3
including       19.7 28.9 9.2 4.05 12.6
RDO_20_011 -70 60 40 13.3 23.4 10.1 5.51 9.3
RDO_20_012 -55 240 35 8 32.5 24.5 6.66 13.9
including       15 23 8.6 9.3 14.9
RDO_20_13a* -55 240 55 12 42 30 2.99 19.6
including       19.6 33 13.4 4.47 25.1
RDO_20_014 -55 240 50 10 33.5 23.5 5.87 27.5
including       12.5 25.4 12.9 8.83 38
RDO_20_015 -55 240 35 7.3 22 14.7 3.06 10.5
RDO_20_016 -60 240 40 9.4 26.8 17.4 1.08 5.7
RDO_20_017 -55 240 40 12.7 34.2 21.4 2.85 10.7
including       23 29 6 5.1 15
RDO_20_018 -55 240 40 13.3 34.4 21.1 1.76 7.7
including       15 19 4 4.06 5.9
RDO_20_019 -50 240 30 13 16.5 3.5 3.98 2.7
RDO_20_020 -55 60 30 9 12.4 3.4 1.05 6.4


Note: Intervals in the table represent drilled length. It is expected that true thickness is approximately 80% of drilled length as drill holes were drilled at a high angle to the gold mineralization that dips at approximately 25 degrees to the northeast. Intervals and grades have been rounded to 1 decimal place.


* Drill hole RDO_20_013 was lost at 19m depth, and drill-hole RDO_20_013a was drilled adjacent to it and reached target depth.


The objectives of the drill program are to provide greater detail on the gold mineralization at Rodeo by infill and limited step-out drilling and to provide additional material for metallurgical and geotechnical test work. Confirmation of continuity of the gold grades in the heart of the deposit is an important step towards the future development of the Rodeo project outlined in the recent Preliminary Economic Assessment published on May 28, 2020 (link).


Warren Rehn, President and Chief Executive Officer of Golden Minerals, commented, “We continue to intersect thick intervals of near-surface, high-grade gold mineralization at Rodeo. The results of this infill drilling program are showing an improvement in gold grades on average compared to previous drill hole results. This further supports our plan to develop the project and process this high-grade material in our oxide plant at Velardeña.”


Rodeo Drill Hole Locations


About Rodeo


Rodeo is an 1,866-hectare gold project located in Durango State, Mexico approximately 80 kilometers west of the Company’s Velardeña Properties and processing mills. Golden acquired the Rodeo property subject to a royalty interest due to La Cuesta International in the second quarter 2015, prior to which exploration by other companies identified a gold-bearing system exposed at surface. Golden conducted a 2,080-meter core drilling program in 2016 and outlined a potentially open pit minable, high-grade resource as reported in a NI 43-101 Technical Report dated January 26, 2017:


Classification Cut-off Tonnes (Mt) Au g/t Ag g/t Au (Koz) Ag (Koz)
Indicated 0.83 0.4 3.3 11 46 200




(1) Cut-off grade and Au equivalent calculated using metal prices of $1,220 and $17 per troy ounce of Au and Ag, recoveries of 77% and 90% Au and Ag;
(2) Mineral resources have been pit-shell constrained using the Lerch Grossman algorithm with cost inputs per tonne of $7.50 mining, $10 trucking and $20 processing. A breakeven cut-off including trucking and processing costs per block was applied to a block model within the optimized shell;
(3) Metal prices do not exceed three-year trailing average as of the end of December 2016, per SEC guidance; and
(4) Reported indicated mineral resources are equivalent to mineralized material under SEC Industry Guide 7.


Cautionary Note to United States Investors Regarding Estimates of Indicated Mineral Resources


This press release uses the terms “mineral resources” and “indicated mineral resources” which are defined in, and required to be disclosed by, Canadian National Instrument NI 43-101. We advise U.S. investors that these terms are not recognized under SEC Industry Guide 7. Accordingly, the disclosures regarding mineralization in this news release may not be comparable to similar information disclosed by Golden Minerals in the reports it files with the SEC. The estimation of measured resources and indicated resources involves greater uncertainty as to their existence and economic feasibility than the estimation of proven and probable reserves. U.S. investors are cautioned not to assume that any or all mineral resources are economically or legally mineable or that these mineral resources will ever be converted into mineral reserves. In addition, the SEC normally only permits issuers to report mineralization that does not constitute SEC Industry Guide 7 compliant “reserves” as in-place tonnage and grade without reference to unit amounts. U.S. investors are urged to consider closely the disclosure in our Form 10-K for the year ended December 31, 2019 and other SEC filings.


Review by Qualified Person and Quality Control


The technical contents of this press release have been reviewed by Matthew Booth, a Qualified Person for the purposes of NI 43-101. Mr. Booth has over 17 years of mineral exploration experience and is a Qualified Person member of the American Institute of Professional Geologists (CPG 12044).


To ensure reliable sample results, Golden Minerals uses a quality assurance/quality control program that monitors the chain of custody of samples and includes the insertion of blanks, duplicates and reference standards in each batch of samples. Core is photographed and sawn in half with one half retained in a secured facility for verification purposes. Sample preparation (crushing and pulverizing) is performed at an independent ISO 9001:2001 certified laboratory in Chihuahua or Zacatecas, Mexico. Prepared samples are direct-shipped to an ISO 9001:2001 certified laboratory in Canada.


About Golden Minerals


Golden Minerals is a Delaware corporation based in Golden, Colorado. The Company is primarily focused on advancing its Rodeo and Velardeña properties in Mexico and, through partner-funded exploration, its El Quevar silver property in Argentina, as well as acquiring and advancing mining properties in Mexico, Argentina and Nevada.


Posted August 27, 2020

Share this news article



Outback Goldfields Corp. (TSX-V: OZ) (OTCQB: OZBKF) is pleased to... READ MORE

March 2, 2024

Denison Reports Impressive Financial and Operational Results for 2023 Including Significant Increase in Phoenix ISR Project Economics and a $134 Million Gain on Physical Uranium Holdings

Denison Mines Corp. (TSX: DML) (NYSE American: DNN) filed its Au... READ MORE

March 2, 2024


First Quantum Minerals Ltd. (TSX: FM) announced that it has compl... READ MORE

February 29, 2024


Vizsla Silver Corp. (TSX-V: VZLA) (NYSE: VZLA) (Frankfurt: 0G3)... READ MORE

February 29, 2024

New Found Makes New Discovery With 35 g/t Au Over 17m Including 1,910 g/t Au Over 0.3m at “Vegas Zone”

New Found Gold Corp.  (TSX-V: NFG, NYSE-A: NFGC) is pleased to a... READ MORE

February 29, 2024

Copyright 2024 The Prospector News