The Prospector News

GoGold Intersects 26m at 2.97 g/t Gold Equivalent Including 4m at 14.16 g/t Gold Equivalent

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

GoGold Intersects 26m at 2.97 g/t Gold Equivalent Including 4m at 14.16 g/t Gold Equivalent

 

 

 

 

 

GoGold Resources Inc. (TSX: GGD) (OTCQX: GLGDF) is pleased to release the assay results from 10 new diamond drill holes at the Los Ricos project, with 4 holes in the Main area, 4 holes in the San Juan area and 2 in the southern area of the project.

 

Hole LRGG-19-056, drilled in the Main area, intersected 26.0m at 296.0 to 325.0m, averaging 2.97 g/t gold equivalent or 222.8 g/t silver equivalent, made up of 0.50 g/t gold and 185.5 g/t silver, including 4.0m of 14.16 g/t gold equivalent. Historical workings of 3.0m were encountered in this hole. This is the second deepest hole drilled at the Los Ricos project to date, eclipsed by hole LRGG-19-061 which intersected 18.0m of 0.80 g/t gold equivalent from 324.4 to 349.2m, although 6.8m within this intersection included void due to historical underground workings.

 

“Holes 56 and 61 are the deepest holes drilled to date at Los Ricos, and shows the project continues to be open at depth with strong mineralization. We still see a broader mineralized zone of over 20 metres at these depths which may be amenable to deeper bulk mining and also shows a high-grade core within these broader zones which may represent underground mining targets,” said Brad Langille, President and CEO.

 

Hole LRGG-19-063 was drilled in the Main area and intersected 24.5m at 98.0 to 122.5m, averaging 1.67 g/t gold equivalent or 125.1 g/t silver equivalent, made up of 0.53 g/t gold and 85.3 g/t silver, including 5.3m of 4.96 g/t gold equivalent. No historical workings were encountered.

 

Hole LRGG-19-069 was drilled in the San Juan area and intersected 16.3m of 2.48 g/t gold equivalent from 107.0 to 128.5m, consisting of 1.11 g/t gold and 103.0 g/t silver. This hole encountered voids due to historical workings totalling 5.3m. Included in this intersection was 3.0m of 8.24 g/t gold equivalent or 618 g/t silver equivalent.

 

Hole LRGG-19-068 was drilled in the south end of the Main area and intersected 7.8m from 161.9 to 169.7m, averaging 3.07 g/t gold equivalent or 230.1 g/t silver equivalent, consisting of 0.92 g/t gold and 161.1 g/t silver, including 3.2m of 6.96 g/t gold equivalent. The hole is along the southern edge of mineralization found at the project and is more than 100m deeper than hole LRGG-19-009 which intersected 21.2m of 24.6 g/t gold equivalent (per press release dated May 14, 2019).

 

Detailed intersections are listed in Table 1, and the hole locations are shown in Table 2.

 

A longitudinal section summary of all the holes drilled at Los Ricos to date is available at

https://gogoldresources.com/component/rsfiles/preview?path=diagrams%252FLosRicos_LongSec_20191120.pdf

 

Table 1:  Drill Hole Intersections

 

 

Hole ID Area From To Length1 Au Ag AuEq2 AgEq2
    (m) (m) (m) (g/t) (g/t) (g/t) (g/t)
LRGG-19-056 Main3 296.0 325.0 26.0 0.50 185.5 2.97 222.8
  including 312.0 316.0 4.0 1.89 920.0 14.16 1,062.1
LRGG-19-061 Main4 324.4 349.2 18.0 0.08 54.2 0.80 60.3
  including 337.7 340.8 3.1 0.04 108.5 1.49 111.9
LRGG-19-062 San Juan 88.5 106.5 18.0 0.20 45.1 0.80 59.7
  including 90.0 93.0 3.0 0.63 118.0 2.20 165.3
LRGG-19-063 Main 98.0 122.5 24.5 0.53 85.3 1.67 125.1
  including 103.5 108.9 5.3 1.90 228.8 4.96 371.6
LRGG-19-064 Main 112.0 127.5 15.5 0.25 52.4 0.95 71.2
LRGG-19-066 San Juan 140.5 155.5 15.0 0.32 44.8 0.91 68.5
LRGG-19-067 San Juan 88.5 101.5 13.0 0.15 30.7 0.56 41.9
LRGG-19-068 Main South 161.9 169.7 7.8 0.92 161.1 3.07 230.1
  including 162.8 166.0 3.2 2.14 361.4 6.96 521.7
LRGG-19-069 San Juan5 107.0 128.5 16.3 1.11 103.0 2.48 186.1
  including 120.8 123.8 3.0 3.56 351.2 8.24 618.0
LRGG-19-070 Main South 119.1 128.7 9.6 0.02 14.3 0.21 15.6
     
1.      Not true width

2.      AuEq and AqEq converted using a silver to gold ratio of 75:1

3.      Excludes 3.0m of open stopes from historical underground workings

4.      Excludes 6.8m of open stopes from historical underground workings

5.      Excludes 5.3m of open stopes from historical underground workings

   

 

 

Table 2: Drill Hole Locations 

 

 

Hole ID Easting Northing Elevation Azimuth Dip Length
LRGG-19-056 610392 2327556 1432 50 -65 340.0
LRGG-19-061 610447 2327464 1413 50 -65 375.0
LRGG-19-062 610396 2327813 1463 50 -45 129.0
LRGG-19-063 610422 2327770 1458 50 -45 171.0
LRGG-19-064 610422 2327770 1458 50 -65 163.5
LRGG-19-066 610360 2327783 1447 50 -65 180.0
LRGG-19-067 610367 2327854 1463 50 -65 127.5
LRGG-19-068 310718 2327398 1401 50 -65 199.0
LRGG-19-069 610337 2327829 1453 50 -65 160.5
LRGG-19-070 610765 2327437 1410 50 -65 180.0

 

 

In mid-October 2019, GoGold completed the Phase 1 diamond drilling program consisting of 10,000 m of HQ size diamond drill core that began in March 2019. The Phase II program has started and a third drill machine was added to the program.

 

The core drilling campaign is focused on defining the mineralized halo around the historical high grade ore shoots as defined by the underground workings and the 65 historical RC drill holes on the property. The program has now been expanded for additional testing along 3.2 km of the Los Ricos mineralized zone.

 

The diamond drill core (HQ size) is geologically logged, photographed and marked for sampling. When the sample lengths are determined, the full core is sawn with a diamond blade core saw with one half of the core being bagged and tagged for assay. The remaining half portion is returned to the core trays for storage and/or for metallurgical test work. 

 

The sealed and tagged sample bags are transported to the ActLabs facility in Zacatecas, Mexico. ActLabs crushes the samples and prepares 200-300 gram pulp samples with ninety percent passing Tyler 150 mesh (106μm). The pulps are assayed for gold using a 50 gram charge by fire assay (Code 1A2-50) and over limits greater than 10 grams per tonne are re-assayed using a gravimetric finish (Code 1A3-50). Silver and multi-element analysis is completed using total digestion (Code 1F2 Total Digestion ICP). Over limits greater than 100 grams per tonne silver are re-assayed using a gravimetric finish (Code 8-Ag FA-GRAV Ag).

 

Quality Assurance / Quality Control and Data Verification

Quality assurance and quality control procedures monitor the chain-of-custody of the samples and includes the systematic insertion and monitoring of appropriate reference materials (certified standards, blanks and duplicates) into the sample strings. The results of the assaying of the QA/QC material included in each batch are tracked to ensure the integrity of the assay data. All results stated in this announcement have passed GoGold’s QA/QC protocols.

 

Mr. David Duncan, P. Geo. is the qualified person as defined by National Instrument 43-101 and is responsible for the technical information of this release. 

 

About GoGold Resources

GoGold Resources is a Canadian-based silver and gold producer focused on operating, developing, exploring and acquiring high quality projects in Mexico. The Company operates the Parral Tailings project in the state of Chihuahua and has the Los Ricos exploration project in the state of Jalisco. Headquartered in Halifax, NS, GoGold is building a portfolio of low cost, high margin projects.

 

Posted November 20, 2019

Share this news article

MORE or "UNCATEGORIZED"


Talisker Closes $9.15 Million Private Placement

Talisker Resources Ltd. (TSX: TSK) (OTCQB: TSKFF) is pleased to a... READ MORE

August 11, 2022

GoGold Releases 2022 Q3 Financial Results

GoGold Resources Inc. (TSX: GGD) (OTCQX: GLGDF) is pleased to an... READ MORE

August 11, 2022

Bunker Hill Discovers High-Grade Silver Mineralization

HIGHLIGHTS New high-grade silver and lead vein system discovered ... READ MORE

August 11, 2022

Goliath Drills 59.1 Meters of Continuous Sulphide Mineralization Confirming a Mineralized Footprint of 5.25 Square Kilometers; System Remains Wide Open in All Directions

Drill Highlights: 100% of all holes completed to date on the Sure... READ MORE

August 11, 2022

Titan Reports Record Production from Empire State Mines on Q2 2022 Results

Titan Mining Corporation (TSX: TI) announces the results for the... READ MORE

August 11, 2022

We acknowledge the [financial] support of the Government of Canada.

Government of Canada Supported
Copyright 2022 The Prospector News