The Prospector News

Freeman Expands Shallow High-Grade Oxide Gold Mineralizaton at Lemhi: 0.9 g/t Au over 174.2 metres Including 3.9 g/t Au over 18.5 metres

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Freeman Expands Shallow High-Grade Oxide Gold Mineralizaton at Lemhi: 0.9 g/t Au over 174.2 metres Including 3.9 g/t Au over 18.5 metres

 

 

 

 

 

Freeman Gold Corp. (CSE: FMAN) (FSE: 3WU) is pleased to provide assay results of core from an additional 11 of 34 diamond drill holes on Freeman’s 100% owned Lemhi Gold Project located in Idaho. The objective of the 2020 Phase 1 drill program was designed to confirm historical mineralization and allow the use of over 355 historical drill holes in a maiden National Instrument 43-101 compliant resource estimate. The drill program focused on infill and step-out drilling within the known mineralized body to increase confidence and maximize the potential resource.

 

All holes drilled to date have intersected high-grade shallow oxide gold. Selected highlighted results from the additional 11 holes are 2.6 g/t Au over 14.1m (FG20-005C); 1.6 g/t Au over 86m, including 2.2 g/t Au over 20.2m (FG20-007C); 0.9 g/t Au over 174.2m, including 3.9 g/t Au over 18.5m (FG20-008C); and 3.5 g/t Au over 9.5m (FG20-013C). Gold mineralization extends to at least 210 meters and is open at depth. FG20-014C was drilled to test mineralization beneath the intrusion. Mineralization discovered below the intrusive unit encountered 1.2 g/t Au over 21.8m demonstrating that the mineralization not only continues at depth but to the east. This drill hole was the easternmost hole drilled during the 2020 campaign. This new zone remains open on strike. In addition, drill hole FG201-008 ended in mineralization (181.93m to 182.97m contained 2.39 g/t Au), suggesting either additional mineralized stacks at depth and or proximity to a feeder zone.  The results are being interpreted by technical staff for future follow up activities.

 

Table 1 – Significant Drill Results

 

Drill Hole
ID
Azimuth, Dip
(degrees)
Total Depth
(m)
Depth (m) Interval
(m)
Average Grade
(g/t Au)
From To
FG20-004C 298 -75 223 0 27.4 27.4 0.4
 and 93.0 167.0 74 0.7
including 93.0 107.2 14.2 1.8
 and 208.2 209.9 1.7 5.2
FG20-005C 360 -90 210 43.0 57.1 14.1 2.6
including 49.0 57.1 8.1 3.5
 and 66.9 123.5 56.8 0.5
FG20-007C 360 -90 182 7.4 181.7 174.3 0.8
including 15.8 36.0 20.2 2.2
including 90.0 97.5 7.5 6.3
including 14.9 100.9 86.0 1.6
FG20-008C 360 -90 184 9.4 183.6 174.2 0.9
including 64.7 71.8 7.1 3.8
including 82.1 100.6 18.5 3.9
FG20-009C 360 -90 197 16.5 183.1 166.6 0.3
including 155.1 162.0 6.9 2.6
FG20-010C 360 -90 173 100.0 136.9 36.9 0.6
including 108.0 113.1 5.1 1.7
FG20-011C 360 -90 173 12.1 153.0 140.9 0.3
including 118.1 122.0 3.9 5
including 118.1 132.0 13.9 1.9
FG20-012C assays pending
FG20-013C 360 -90 184 106.9 127.2 20.3 2.1
including 109.1 118.6 9.5 3.5
including 110.2 116.9 6.7 4.3
FG20-014C 360 -90 286 70.0 75.0 5.0 1.1
 and 157.9 179.7 21.8 1.2
including 159.0 163.0 4.0 2
FG20-015C 360 -90 201 35.0 59.0 24.0 1
including 49.0 51.0 2.0 4.8
 and 113.0 124.0 11.0 2.1
including 113.0 117.0 4.0 4.9
 and 146.0 168.0 22.0 0.3
FG20-016C 360 -90 164 64.8 101.1 36.3 0.25
including 71.0 72.0 1.0 4.3
*Intervals are core-length. True width is estimated between 90-95 percent (“%”) of core length.

 

Will Randall, President and CEO, commented, “These drill results continue to demonstrate the consistent high grade, near surface nature of the gold mineralization at Lemhi. We have now received assay results, which have exceeded expectations, for half of the holes drilled by Freeman. In particular, we are very pleased at the response to drill testing the high-grade structures which are behaving in a consistent and predictable manner. We are also encouraged by FG20-014C which is our first drill hole to explore possible repetitions of the flat lying structures at depth below a predominant intrusive body. We now have confirmed that gold mineralization continues at depth and will be working on follow up work to maximize this discovery.”

 

Geologically, the Lemhi Gold Project lies within the Idaho-Montana porphyry belt, a northeast-trending alignment of metallic ore deposits and mines related to granitic porphyry intrusions. These extend north-easterly across Idaho and are related to the Trans-Challis fault system, a broad (20-30 km-wide) system of en-echelon northeast-trending structures extending from Boise Basin more than 270 km into Montana. At Lemhi, gold mineralization is hosted in Mesoproterozoic quartzites and phyllites within a series of relatively flat-lying lodes consisting of quartz veins, quartz stockwork and breccias. Mineralized lodes are associated with low angle faults, folding and shear zone(s). The mineralized zones have varying amounts of sulphides (pyrite, chalcopyrite, bornite, molybdenum, and occasionally arsenopyrite) where free gold is common.  Gold mineralization at Lemhi is open at depth and on strike.

 

All drill core and rock samples are sent to ALS Global Laboratories (Geochemistry Division) in Vancouver, Canada, an independent and fully accredited laboratory (ISO 9001:2008) for analysis for gold by Fire Assay and multi-element Induction Coupled Plasma Spectroscopy (select drill holes). Freeman has a regimented Quality Assurance, Quality Control program where at least 10% duplicates, blanks and standards are inserted into each sample shipment.

 

Core photos and drill sections can be found at www.freemangoldcorp.com.  Drill holes are not analyzed in order but as shipments were logged in at the laboratory.

 

The technical content of this release has been reviewed and approved by Dean Besserer, P. Geo., VP Exploration for the Company and a Qualified Person as defined by National Instrument 43-101.

 

About Freeman Gold Corp

 

Freeman Gold Corp. is a mineral exploration company focused on the development of its 100% owned Lemhi Gold property. The Lemhi Project comprises 30 square kilometers of highly prospective land. The mineralization at the Lemhi Project consists of shallow, near surface primarily oxide gold mineralization that has been identified over 355 drill holes and is open at depth and in multiple directions. The Company is completing an initial Phase 1 diamond drill program for a maiden NI 43-101 compliant resource estimate.

 

Posted March 11, 2021

Share this news article

MORE or "UNCATEGORIZED"


Elevation Gold Reports Financial Results for Year Ended December 31, 2023, including $66.4M in Total Revenue

Elevation Gold Mining Corporation (TSX-V: ELVT) (OTCQB: EVGDF) i... READ MORE

April 18, 2024

Reunion Gold Announces the Signing of a Mineral Agreement With the Government of Guyana for Its Oko West Project

Reunion Gold Corporation (TSX-V: RGD; OTCQX: RGDFF) is pleased to announ... READ MORE

April 18, 2024

Drilling Confirms 4 km of Favourable Corridor at Lynx Gold Trend

Puma Exploration Inc. (TSX-V: PUMA) (OTCQB: PUMXF) is thrilled to... READ MORE

April 18, 2024

Grid Metals Intersects 7 m at 1.28% Li2O at over 125 m Below the Previously Deepest Drill Holes at Donner Lake; Provides Project Update

Grid Metals Corp. (TSX-V:GRDM) (OTCQB:MSMGF) is pleased to announ... READ MORE

April 18, 2024

Azimut and SOQUEM Cut Thick Spodumene Pegmatites at Galinée, James Bay Region, Quebec

Azimut Exploration Inc. (TSX-V: AZM) (OTCQX: AZMTF) is pleased ... READ MORE

April 18, 2024

Copyright 2024 The Prospector News