Emerita Resources Corp. (TSX-V: EMO) (OTCQB: EMOTF) (FSE: LLJA) continues to intersect copper-gold mineralization with associated zinc-lead-silver at its ongoing drilling campaign at its El Cura deposit. El Cura is part of Emerita’s wholly owned Iberian Belt West project (Figure 1) which includes three identified Volcanogenic Massive Sulfide deposits: La Romanera, El Cura and La Infanta. Results contained in this news release are from El Cura deposit.

New drilling results from the ongoing drilling campaign at El Cura include:

• Drillhole EC050 encountered 10.8m grading 4.8% copper, 1.4 g/t gold and 72.6 g/t silver;
• Drillhole EC046 encountered 8.9m grading 1.1% copper, 1.2 g/t gold and 15.5 g/t silver;
• Drillhole EC039 encountered 1.5m grading 1.0% copper, 0.6% lead, 1.9% zinc, 2.0 g/t gold and 38.7 g/t silver;
• Drillhole EC043 encountered 3.7m grading 1.3% copper, 1.6% lead, 2.6% zinc, 0.9 g/t gold and 52.1 g/t silver; and
• Drillhole EC044 intersected 4.9m grading 1.2% copper, 0.9% lead, 1.3% zinc, 1.0 g/t gold and 26.7 g/t silver.

 Figure 1. IBW tenement and locations of La Romanera, El Cura and La Infanta deposits. Data in this news release is from the El Cura Deposit.

Table 1 summarizes the recent drill results which demonstrate copper-gold-rich mineralization continuing to occur within wider intervals of polymetallic base metal mineralization at El Cura:

Table 1: Recent drilling results received for the El Cura deposit.

Discussion

Drilling announced in this release focused on two main objectives: 1) determining continuity of mineralization within the El Cura deposit to support conversion to mineral reserves in an upcoming NI 43-101 compliant prefeasibility study and; 2) testing the continuation of the deposit both at shallower levels and where it remains open at depth. These results confirm good continuity of grade and width within the deposit. By testing the shallower extents Emerita has confirmed that El Cura remains open in all directions, particularly, down plunge and to the west of drill holes EC046 and EC050. The deposit continues to have excellent potential to grow through additional drilling (Figures 2 and 3). There are currently 4 drill rigs dedicated to testing El Cura in these open directions. Cross sections for the drilling in this release are included in Figure 4 and photoplates of selected examples of copper-gold rich mineralization from these drill holes are shown in Figure 5.

The Company recently released an updated Mineral Resource Estimate (see Company’s news release dated March 17, 2025) for the IBW Project. This included an initial NI 43-101 compliant MRE for El Cura, establishing its importance to the IBW resource base.

Figure 2. Plan view map showing drill hole traces of the El Cura drilling. Hole traces in this NR colored red.

Figure 3. Vertical longitudinal section of El Cura deposit, oriented east-west, looking north. Holes EC039, EC040, EC041, EC042, EC043, EC044, EC045, EC046, EC047, EC048 and EC050 are shown in red. Present deposit outline is indicated in green.

Figure 4. Interpretive geological cross sections. A: Section 649650E showing hole EC039 and EC046. B: Section 649700E showing holes EC044 and EC050. C: Section 649800E showing holes EC044 and EC047. D: Section 649850E showing holes EC043 and EC047.

Figure 4 (continued). Interpretive geological sections. E: Section 649650E showing EC042.

 Figure 5. Photoplate showing selected drill core. A: EC039; Massive sulphide with galena, sphalerite and chalcopyrite veins.

Figure 5 (continued). B: EC043; Massive sulphide with chalcopyrite in stringer veins with some galena and sphalerite. C: EC044; Massive sulphide with galena, sphalerite and chalcopyrite in millimetric veins and patches. D: EC046 chalcopyrite and pyrite clasts with siliceous stockwork breccia;

Figure 5 (continued). E: EC047; Massive sulphide as pyrite and chalcopyrite F: EC050; Massive sulphide as pyrite and chalcopyrite with ~1cm wide massive chalcopyrite vein.

Joaquin Merino, P.Geo., President of Emerita, states, “These results demonstrate that El Cura remains open for further resource expansion with additional drilling.    We currently have four drilling rigs operating at El Cura, and we look forward to additional positive drill results as the drill campaign continues throughout 2025.”

Quality Assurance/Quality Control

Drilling at El Cura is HQ size and core is placed into core trays at the drill site and transported directly from the site to Emerita’s coreshack (15Km) from El Cura. Once the cores are received at Emerita’s coreshack they are photographed, and geotechnical logging is performed. Geological, mineralogical and structural logging follows, and mineralized zones are identified. The samples are marked every 1m or less, and respecting lithological contacts, with most of the samples 1.0m long. The zone immediately above and below the mineralized zones are also sampled. Core samples are sawed in half and half of the core is returned to the core tray for future reference. Once the core samples are cut, bagged and tagged, they are shipped to the ALS laboratory in Seville by Emerita personnel where sample preparation is done. In Seville, ALS performs the mechanical preparation of the samples and then the pulps are sent to ALS Ireland (ICP) and ALS Romania (fire assay). The analysis at ALS Lab corresponds to the ME-ICPore (19 elements) package, together with the Au-AA23 fire assay (Gold).

10% of the analyzed samples correspond to control samples (fine blanks, coarse blanks, high, medium and low-grade standards). In addition, 10% of pulps are reanalyzed at a second independent certified laboratory (AGQ Lab Sevilla). When the analysis is completed, the certificates are received from the laboratory and the QA/QC protocol identifies any deviation or anomaly in the results and the entire batch is re-assayed in such case. Once the data is approved by the QA/QC protocol assays are entered digitally directly into the database.

Qualified Person

Scientific and technical information in this news release has been reviewed and approved by Mr. Joaquin Merino, P.Geo., President of the Company and a Qualified Person as defined by NI 43-101.

About Emerita Resources Corp.

Emerita is a natural resource company engaged in the acquisition, exploration, and development of mineral properties in Europe, with a primary focus on exploring in Spain. The Company’s corporate office and technical team are based in Sevilla, Spain with an administrative office in Toronto, Canada.