The Prospector News

Drill Assay Results from Goldenville Project Return 98.29 G/T Gold Over 0.7 Metres and Broader Intercept of 6.90 Metres Grading 2.70 G/T Gold

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Drill Assay Results from Goldenville Project Return 98.29 G/T Gold Over 0.7 Metres and Broader Intercept of 6.90 Metres Grading 2.70 G/T Gold

 

 

 

 

 

OSPREY GOLD DEVELOPMENT LTD. (TSX-V: OS) (OTCQB: OSSPF) is pleased to announce additional assay results from its 18 hole, 3,044 metre drill program at the Company’s Goldenville Property located in Guysborough County, Nova Scotia. This release includes results for holes G17-08 to GT-15 drilled on the main Goldenville trend, in the immediate vicinity of the Company’s current NI 43-101 Inferred Resource of 2,800,000 tonnes at 3.20 g/t gold for 288,000 ounces of gold (2,800,000 tonnes at 4.96 g/t gold for 447,000 ounces of gold uncapped). Holes G17-1 to G17-7 were previously reported by way of news release dated November 6, 2017. Three holes drilled at Mitchell Lake are still pending and will be reported shortly.

 

 

Notable in the 2017 holes are multiple significant intercepts reflecting the mineralized nature of the Goldenville trend where gold is hosted in an array of stacked quartz veins and host rocks within a large anticlinal fold.

 

 

Highlights:

 

  • G17-14 intersected 52.00 g/t gold over 0.70, within 6.30 m of 6.22 g/t gold – this area is open 750m to the east to hole G07-12;
  • G17-08 intersected 98.29 g/t gold over 0.70 m, as well as 2.70 g/t gold over 6.90 m on the north limb of the anticline;
  • G17-15 intersected 1.52 g/t gold over 14.40 m 64 m east along strike from G17-08, east of Highway 7 in the Bluenose Mine area;
  • G17-09 intersected 2.04 g/t gold over 11.10 m, 114 m along strike from G17-08;
  • G17-13 intersected wide zones of well mineralized host rock and quartz veins in the same unit as G17-07, but no values over 1 g/t gold;

 

 

More complete assay results from the program are available below in Table 1, with collar location data in Table 2. In addition, a plan map displaying drill collars from this program in relation to historic drill collars and shaft locations for past producing mines on the property can be seen below in Figure 1, and at the Company’s website (www.ospreygold.com).

 

 

Company President Cooper Quinn said, “We’re very happy with the results of this program. These results support the potential to expand our current resource at Goldenville. The drill program also tested for broader zones of mineralization outside of the vein-hosted gold; this was successful in the southern limb of the Goldenville anticline in hole G17-14 which contained multiple intercepts of lower grade mineralization within the host rock. In the northern limb, results in the Bluenose Mine shaft area are very encouraging, returning the highest grades Osprey has drilled to date as well as broad zones of mineralized host rock and quartz veining, highlighted in hole G17-15 drilled over 300 m along strike to the east from G17-14.”

 

 

Holes G17-08, 09, 10, 11, and 15 were drilled near the historic Bluenose Mine shaft area testing the north limb of the Goldenville anticline across approximately 500 m of strike length. All of the holes in this area intersected multiple zones of gold mineralization, usually associated with quartz veining in argillite horizons. Hole G17-08 contained multiple mineralized horizons, including 6.90 m of 2.74 g/t gold from 231.10 m, and 0.70 m of 98.29 g/t gold from 267.5 m. This area saw less prior exploration, and less previous production than the main Stuart Shaft area and remains open to the east of hole G17-11, the easternmost hole drilled on the north limb, which returned 28.42 g/t gold over 0.55 m from 173.65 m, and multiple shallower gold intersections.

 

 

Table 1 — Drill results from 2017 Exploration Program

 

 

 

Hole ID From To Width Au (g/t) Hole ID From To Width Au (g/t)
G17-08 89.50 90.00 0.50 1.43 G17-11 4.70 5.40 0.70 2.95
G17-08 110.00 114.00 4.00 1.29 G17-11 118.90 120.00 1.10 2.48
incl 112.00 112.50 0.50 9.09 G17-11 129.30 130.70 1.40 1.23
G17-08 118.50 122.40 3.90 1.24 G17-11 136.40 139.00 2.60 2.65
incl 121.30 121.90 0.60 5.30 incl 136.40 137.60 1.20 4.00
G17-08 184.70 187.80 3.10 1.19 G17-11 167.50 168.10 0.60 6.77
incl 185.70 186.70 1.00 3.41 G17-11 173.65 175.50 1.85 8.97
G17-08 231.10 238.00 6.90 2.70 incl 173.65 174.20 0.55 28.42
incl 234.00 236.10 2.10 8.57 G17-11 184.00 184.50 0.50 1.58
incl 234.00 234.60 0.60 27.01 G17-12 No Significant Intercepts
G17-08 247.20 247.80 0.60 12.81 G17-13 No Significant Intercepts
G17-08 262.90 263.70 0.80 6.20 G17-14 81.20 81.70 0.50 13.42
G17-08 267.50 268.20 0.70 98.29 G17-14 112.00 112.70 0.70 18.03
G17-09 110.40 112.95 2.55 1.69 G17-14 140.60 141.40 0.80 1.07
incl 110.40 110.85 0.45 7.06 G17-14 146.20 147.20 1.00 3.77
G17-09 130.20 130.70 0.50 1.19 G17-14 158.20 164.50 6.30 6.22
G17-09 165.40 166.20 0.80 1.03 incl 159.10 159.80 0.70 52.00
G17-09 172.00 173.90 1.90 0.99 G17-14 173.00 173.50 0.50 1.49
incl 172.00 172.50 0.50 2.11 G17-14 174.20 175.00 0.80 1.75
G17-09 201.40 212.50 11.10 2.04 G17-15 77.00 80.60 3.60 0.84
incl 202.00 202.90 0.90 3.33 incl 77.00 77.50 0.50 4.45
and 210.80 211.40 0.60 19.40 G17-15 93.85 94.50 0.65 11.00
and 206.10 206.60 0.50 8.50 G17-15 109.80 110.80 1.00 2.18
G17-09 238.30 238.80 0.50 1.17 G17-15 123.50 124.60 1.10 3.73
G17-10 79.30 79.80 0.50 2.22 incl 123.50 124.10 0.60 6.14
G17-10 98.50 99.30 0.80 3.20 G17-15 139.00 140.00 1.00 1.09
G17-10 175.20 176.10 0.90 1.34 G17-15 157.40 157.80 0.40 2.52
G17-10 190.90 197.10 6.20 1.68 G17-15 198.30 212.70 14.40 1.52
incl 190.90 191.60 0.70 8.63 incl 206.55 208.80 2.25 8.88
and 195.30 196.60 1.30 2.72 incl 207.90 208.80 0.90 20.58
G17-10 205.00 205.60 0.60 1.30 G17-15 233.10 233.70 0.60 1.96
G17-10 226.00 226.70 0.70 1.12          

 

1.     

 

True widths are unknown, but should be approximated by these results. Holes drilled from the north have intercepts largely perpendicular to bedding and observed core axis angles for all holes were approximately perpendicular. Holes drilled from the south have core angles averaging approximately 45-50 degree and true widths may be less than drilled intersection.

 

 

Figure 1 – 2017 Goldenville Drill Collar Locations

 

 

 

 

Table 2 — Drill Hole Collar Data

 

 

 

Hole ID Location Easting Northing Depth Azimuth Dip
G17-8 Bluenose 578264 4997440 271 174 -46
G17-9 Bluenose 578378 4997444 265 174 -48
G17-10 Bluenose 578425 4997461 265 174 -47
G17-11 Bluenose 578495 4997457 187 174 -48
G17-12 Bluenose 578765 4997211 136 354 -45
G17-13 Central 577946 4997180 139 354 -45
MIT17-1 Mitchell Lake W 573350 4997303 178 0 -45
MIT17-2 Mitchell Lake 573498 4997402 151 180 -45
MIT17-3 Mitchell Lake 573447 4997406 106 180 -45
G17-14 Central Goldenville 578011 4997141 181 354 -56
G17-15 Bluenose 578328 4997434 265 174 -48

 

 

 

About Goldenville and Osprey

 

 

Osprey is focused on exploring five historically producing gold properties in Nova Scotia, Canada. Osprey has the option to earn 100% (subject to certain royalties) in all five properties, including the Goldenville Gold Project, Nova Scotia’s largest historic gold producer. Goldenville hosts a current NI 43-101 Inferred Resource of 2,800,000 tonnes at 3.20 g/t gold for 288,000 ounces of gold (2,800,000 tonnes at 4.96 g/t gold for 447,000 ounces of gold uncapped) near the town of Sherbrooke, NS. All five properties in Osprey’s current portfolio have a history of high-grade gold production. A copy of the Company’s technical report titled “Technical Report on the Goldenville Property, Guysborough County, Nova Scotia Canada” prepared by by David G. Thomas, M.Sc., P. Geo. and Neil Pettigrew, M.Sc., P. Geo. is available under the Company’s profile at www.SEDAR.com.

 

 

Samples from the 2017 exploration program are cut with a diamond saw, and placed in sealed bags and shipped to Bureau Veritas Commodities in Timmins, ON for sample preparation, with pulps subsequently shipped to Vancouver, BC for gold and multi-element ICP analysis. A Quality Control/Quality Assurance program, including the insertion of Duplicates, Standards, and Blanks, has been implemented. All quality control samples were acceptable. The 2017 exploration program is performed under the supervision Perry MacKinnon, P.Geo, Vice President of Exploration of Osprey and a ‘Qualified Person’ under NI 43-101. Mr. MacKinnon has reviewed and approved the technical content of this release.

 

 

Posted February 21, 2018

Share this news article

MORE or "UNCATEGORIZED"


KOOTENAY SILVER CLOSES BROKERED PUBLIC OFFERING FOR GROSS PROCEEDS OF C$10.35 MILLION

Kootenay Silver Inc. (TSX-V: KTN) is pleased to announce that the... READ MORE

April 25, 2024

U.S. Gold Corp. Closes $4.9 Million Non-Brokered Registered Direct Offering

U.S. Gold Corp. (NASDAQ: USAU), is pleased to announce that it h... READ MORE

April 25, 2024

Getchell Gold Corp. Announces Final Tranche of Debenture Financing

Getchell Gold Corp. (CSE: GTCH) (OTCQB: GGLDF) (FWB: GGA1) is ple... READ MORE

April 25, 2024

Imperial Reports Production Update for 2024 First Quarter

Imperial Metals Corporation (TSX:III) reports quarterly copper an... READ MORE

April 25, 2024

ALX Resources Corp. Intersects Additional Uranium Mineralization at the Gibbons Creek Uranium Project, Athabasca Basin, Saskatchewan

ALX Resources Corp. (TSX-V: AL) (FSE: 6LLN) (OTC: ALXEF) is pleas... READ MORE

April 25, 2024

Copyright 2024 The Prospector News