The Prospector News

Doubleview Drills Strongest Mineralization Discovered so far at Hat Property including 258 meters of 0.31 g/t Gold and 0.47% Copper (1% Cu Eq) in an interval of 450 meters of 0.23 g/t Gold and 0.35% Copper (0.7% Cu Eq)

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Doubleview Drills Strongest Mineralization Discovered so far at Hat Property including 258 meters of 0.31 g/t Gold and 0.47% Copper (1% Cu Eq) in an interval of 450 meters of 0.23 g/t Gold and 0.35% Copper (0.7% Cu Eq)

 

 

 

 

 

Doubleview Gold Corp (TSX-V:DBG) is pleased to report that the Company is preparing to re-start diamond drilling at its Hat porphyry discovery in northwest British Columbia after intersecting the strongest mineralization yet encountered at the property. Drill hole H-034 was mineralized from bedrock surface to the total length of 701.2 meter. A 3.6 metre section of core assayed 3.44 g/t Au and 6.61% Cu (10.91% Cu Eq).

 

Drill hole H-034, that was directed to a geophysical target area, intersected 689 metres of strong gold-copper mineralization in what appears to be a continuation of the Lisle Zone deposit. As detailed elsewhere in this release, H-034 intercepted 88.0 meters of 0.68 g/t Au and 1% Cu in a greater interval of 258 metres of 0.31 g/t Au and 0.47% Cu (1.87% Cu Eq) within a greater interval of 692.3 metres of 0.17 g/t Au and 0.25% Cu. Drill hole H-034 was collared 360 metres south-southwest of hole H-022 and 469 metres south-southwest of hole H-023 and expands the dimensions of the Lisle Zone to approximately 920 meters north-south and 650 meters east-west. The indicated vertical dimension is about 620 metres. The Lisle Zone has not been de-limited in any direction.

 

Mr. Farshad Shirvani, Doubleview’s President and CEO, comments that “The large expansion of the Lisle Zone announced today confirms our belief that our Hat Project is rapidly becoming a very significant large deposit and that geophysical data from 2018 surveys are reliable guides to mineralization. Since acquiring the Hat property in 2011, and discovering the Lisle Zone in 2014, we have conducted multiple drill programs and expanded the mineral zone to its present size and we are approaching a situation where our database of analyses will permit resource estimations. Our geologic model is supported by drilling and by geophysical surveys. Several other prospective areas of the property await exploration and we are very confident that not only will we continue to grow the Lisle, but will make new discoveries”.

 

Drilling Highlights:

 

  • HAT-034 demonstrates the potential for higher grades and length not only within but also around the 3D IP survey highlighted in previous news releases;
  • The Lisle zone of the Hat deposit now measures approximately 650 meters by 920 meters, and depth has been shown to exceed 600 metres. Most of the 3D IP footprint and the property remain to be explored;
  • Mineralization remains open in all directions – several large coincident geological, geophysical and geochemical targets close to the Lisle Zone have yet to be drill-tested.

 

Recent discoveries have shown the continuity of large scale gold rich porphyry-style mineralization and the relevance and reliability of the geophysical database. The following is a tabulation of significant assay intercepts from drill hole H-034:

 

Table 1 : Significant Assay Results of HAT-034:

 

 

DDH   From
(m)
To
(m)
Length (m)* CuEq**
(%)
Au
(g/t)
Cu
(%)
Ag
(g/t)
Co
(ppm)
Pd
(g/t)
H034 Entire hole 9.0 701.3 692.3 0.52 0.17 0.25 0.43 0.008 0.025
  including 49.0 660.9 611.9 0.59 0.19 0.28 0.48 0.008 0.025
  including 210.8 660.9 450.1 0.70 0.23 0.35 0.51 0.008 0.029
  And Including 402.3 660.9 258.6 0.92 0.31 0.47 0.76 0.009 0.041
  And Including 326.4 561.4 235.0 1.00 0.34 0.51 0.76 0.011 0.033
  And Including 452.2 540.2 88.0 1.87 0.68 1.00 1.66 0.017 0.062
  And Including 532.0 538.2 6.1 6.79 2.15 4.09 7.98 0.042 0.053
  And including 534.5 538.2 3.6 10.91 3.44 6.61 13.00 0.064 0.081
H033***   38.4 243.3 204.9 0.35 0.14 0.14 0.90 0.006 0.012
  Including 234.7 243.3 8.6 0.85 0.54 0.22 0.66 0.007 0.014

* Drill hole intercepts included in this news release are core lengths that may or may not be actual widths of mineralization. It is not possible to determine actual widths.

** Cu eq are calculated based on Cu eq (%) = ([(%Cu) x (22.0462) x ($2.36) + (g/t/Au) x (1/31.1035) x ($1700)+ (g/t/Ag) x (1/31.1035) x ($15.5) + (g/t/Pd) x (1/31.1035) x ($2000)+ (%Co) x (22.0462) x ($17)]) ÷ ((22.0462) x ($lbCu))).

*** Due to technical drilling issues Drill hole H-033 was abandoned in strong mineralization at depth 243.3 metres. It was intended to go much deeper: the company will re-drill this hole in the future.

 

The company also wishes to report the previously announced results of the 2019 drilling program. Significant assay results for drill holes H026 and H031 are given below:

 

 

DDH   From
(m)
To
(m)
Length (m) Cu Eq
(%)
Au
(g/t)
Cu
(%)
Ag
(g/t)
Co (ppm) Pd
(g/t)
H026   10.6 522.0 511.4 0.38 0.14 0.19 0.43 67.3 NA
  including 10.6 75.5 64.9 0.49 0.17 0.23 1.66 90.9 NA
  and 189.8 522.0 332.2 0.45 0.16 0.22 0.27 65.5 NA
  and 189.8 310.5 120.7 0.55 0.22 0.25 0.18 86.5 NA
  and 252.9 287.0 34.1 0.81 0.28 0.44 0.34 107.9 NA
  and 482.5 522.0 39.6 0.61 0.16 0.38 0.54 73.4 NA
    846.8 911.3 64.5 0.27 0.09 0.13 0.27 37.6 0.013
  including 879.1 911.3 32.2 0.36 0.13 0.18 0.27 43.8 0.012
H031   14.1 706.0 691.9 0.35 0.11 0.16 0.36 61.6 0.029
  including 88.0 527.0 439.0 0.45 0.14 0.22 0.32 76.3 0.018
  and 155.4 527.0 371.6 0.51 0.16 0.25 0.33 78.5 0.019
  including 175.6 522.1 346.5 0.53 0.17 0.27 0.33 80.7 0.019
  and 237.9 531.0 293.2 0.57 0.19 0.29 0.33 77.5 0.021
  including 379.0 476.3 97.3 0.74 0.25 0.39 0.43 93.7 0.015
  and 423.0 522.1 99.1 0.78 0.23 0.44 0.62 80.5 0.034
  and 420.0 476.3 56.3 1.00 0.35 0.52 0.61 112.3 0.021
H032   73.3 101.0 27.7 0.35 0.10 0.11 1.21 136.5 0.013

 

NA: Not assayed for Pd.

 

Figure 1 illustrates IP data and drill holes

 

 Table 2 : Drill Hole locations of 2019 drilling program are tabulated in the following table:

 

 

Drill Hole East (m) North (m) Elevation (m) Azimuth (°) Dip(°) Depth (m)
H026 348028 6454365 1011.5 180 -65 958.75
H031 347692 6453908 947.00 120 -80 741.00
H032 347692 6453908 947.00 190 -85 111.00
H033 347870 6453938 959.00 175 -80 289.45
H034 347870 6453938 959.00 220 -70 701.25

 

Note: Assasy results of Drill holes H026, H031, and H032 have been announced in prevous news releases.

 

Drill Plans and sections of previous drill results are located on the Company’s website at

https://www.doubleview.ca/projects/hat-gold-rich-copper-porphyry/hat-drill-plan/

 

Mr. Shirvani also stated that the Company is actively planning and preparing the next phases of exploring the Hat property but start-up is subject to ensuring the safety of workers operating in a remote location and the Company’s ability to fund exploration by raising capital in the public market. He also recognizes that the current difficult times may allow aggressive companies such as Doubleview to acquire new opportunities through partnerships and other arrangements.

 

Quality Assurance and Quality Control

 

Core samples were prepared using PRP-910 package of MSALABS Terrace facility. Each core is dried and is crushed to 70% passing 2mm. A 250g is taken using an Automatic Splitter from a Boyd Crusher or a Riffle Splitter to obtain a homogenized, representative sample. This sub-sample is then pulverized to 85% passing a 75-micron screen. All samples are analyzed for Au, Pt, Pd by 30g fire-assay fusion/ICP-ES finish, using FAS-114 package. A separate 0.25g pulp split is analyzed by Four Acid digestion/ICP-MS finish, reporting 48 elements using IMS-230. Over limit Cu, Pb, and Zn are analyzed by Four Acid digestion/ICPES finish using ICP-240/ICF-6xx assay package. All analytical and assay procedures are conducted at independent ISO 17025 and ISO 9001 certified laboratories.

 

Erik Ostensoe, P. Geo., a consulting geologist and Doubleview’s Qualified Person with respect to the Hat Project as defined by National Instrument 43-101 Standards of Disclosure for Mineral Projects, has reviewed and approved the technical contents of this news release. He is not independent of Doubleview as he is a shareholder of the company.

 

Cautionary Note: No mineral resources have been defined at the Hat Property and there is no assurance that further work will result in the Lisle Zone, or other zones if present, being delineated as resources.

 

About Doubleview Gold Corp

 

Doubleview Gold Corp, a mineral resource exploration and development company, is based in Vancouver, British Columbia, Canada, and is publicly traded on the TSX Venture Exchange [TSX-V:DBG]. Doubleview identifies, acquires and finances precious and base metal exploration projects in North America, particularly in British Columbia. Doubleview increases shareholder value through acquisition and exploration of quality gold, copper and silver properties and the application of advanced state-of-the-art exploration methods. Doubleview’s portfolio of strategic properties provides diversification and mitigates investment risk.

 

Posted May 12, 2020

Share this news article

MORE or "UNCATEGORIZED"


K92 Mining Closes CAN$50 Million Bought Deal Financing

K92 Mining Inc. (TSX: KNT) is pleased to announce that, further t... READ MORE

July 6, 2022

NMG Issues Results of Feasibility Study for its Integrated Ore-to-Anode-Material Model Projected to be North America’s Largest Natural Graphite Operation with Attractive Economics

This news release constitutes a “designated news release” for... READ MORE

July 6, 2022

STEP OUT DRILLING AT PANUCO EXPANDS THE SAN ANTONIO VEIN ALONG STRIKE AND DOWN DIP

Vizsla Silver Corp. (TSX-V: VZLA) (NYSE: VZLA) (Frankfurt: 0G3) i... READ MORE

July 6, 2022

Brixton Metals Drills 64m of 5.74 g/t Gold Including 28.95m of 10.36 g/t Gold at its Trapper Target on its Thorn Project

Brixton Metals Corporation (TSX-V: BBB) (OTCQB: BBBXF) is pleased... READ MORE

July 6, 2022

1911 Gold Intersects Gold Mineralization in First-Pass Drilling at the Apex Property, Manitoba

1911 Gold Corporation (TSX-V: AUMB) (OTCQX: AUMBF) is pleased t... READ MORE

July 6, 2022

We acknowledge the [financial] support of the Government of Canada.

Government of Canada Supported
Copyright 2022 The Prospector News