The Prospector News

Calibre Reports Additional Near Surface, Resource Expansion, Drill Results at Its Pan Gold Mine in Nevada; Initial Results Include 1.23 g/t Gold Over 38.1 Metres and 0.89 g/t Gold Over 54.9 Metres

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Calibre Reports Additional Near Surface, Resource Expansion, Drill Results at Its Pan Gold Mine in Nevada; Initial Results Include 1.23 g/t Gold Over 38.1 Metres and 0.89 g/t Gold Over 54.9 Metres

 

 

 

 

 

Calibre Mining Corp. (TSX: CXB) (OTCQX: CXBMF) is pleased to announce additional near surface, resource expansion drill results from its 2023 program at the Pan Gold Mine, located on the prolific Battle Mountain – Eureka gold trend in Nevada. Results at the Dynamite North and Palomino targets located immediately north and south of the current open pit operation, respectively, continue to expand zones with grades higher than Pan’s stated Mineral Resource grade of 0.4 g/t gold. These additional higher-grade results, in combination with the newly discovered Coyote target announced earlier this year, located south of the operation, continue to demonstrate the potential to increase resources, grade, and confidence around the Pan mine.

 

Highlights from the Palomino and Dynamite targets include:

 

Palomino Target

  • 1.23 g/t Au over 38.1 metres including 2.97 g/t Au over 12.2 metres in Hole PR23-080;
  • 0.87 g/t Au over 16.8 metres and 1.58 g/t Au over 21.3 metres including 2.56 g/t Au over 10.7 metres in Hole PR23-088;
  • 1.13 g/t Au over 22.9 metres including 2.82 g/t Au over 4.6 metres in Hole PR23-056;
  • 0.89 g/t Au over 54.9 metres including 1.17 g/t Au over 4.6 metres, 1.41 g/t Au over 9.1 metres and 1.19 g/t Au over 10.7 metres in Hole PR23-066;
  • 1.26 g/t Au over 13.7 metres including 1.72 g/t Au over 9.1 metres and 1.07 g/t Au over 10.7 metres including 1.75 g/t Au over 4.6 metres in Hole PR23-076; and
  • 0.59 g/t Au over 32.0 metres in Hole PR23-086.

 

Dynamite North Target

  • 0.70 g/t Au over 18.3 metres and 0.79 g/t Au over 32 metres including 2.31 g/t Au over 6.1 metres and 1.21 g/t Au over 3.1 metres in Hole PR23-047;
  • 0.54 g/t Au over 27.4 metres in Hole PR23-049; and
  • 0.50 g/t Au over 91.4 metres in Hole PR23-050.

Note: All holes were drilled at angles of -45 to -90 degrees at azimuths designed to intersect targeted structures as nearly as possible to perpendicular when possible. Some drill holes and intercepts reported here did not cross mineralization perpendicularly, and do not represent exact ‘true widths.

Darren Hall, President, and Chief Executive Officer of Calibre stated: “Today’s highly encouraging drill results expand upon our Palomino target results announced on June 21, 2023, and immediately surround the current open pit operations. We look forward to additional results as we continue to advance our discovery and resource expansion drill programs across the operation and mineral concessions where we have identified numerous highly prospective targets.”

 

Link 1Figures

Link 2Drilling Table

 

Quality Assurance/Quality Control

 

Calibre Mining maintains a Quality Assurance/Quality Control program for all its exploration projects using industry best practices. Key elements of the QA/QC program include the insertion of assay standards, blanks, and duplicates in the sample stream to ensure the assay lab results are within specified performance levels. All assay batches passed QAQC. Collar surveys are conducted by a mine surveyor using a Trimble instrument. Down hole deviation surveys are provided by trained drill crews operating a north-seeking gyroscope supplied by REFLEX. Collar and downhole surveys are verified by Calibre geologists. RC drilling was performed by Alford Drilling from Elko, Nevada. Assays were performed by Bureau Veritas, Reno where fire assays were determined on a 30-gram charge with an AAS finish. Cyanide leach assays were also completed Bureau Veritas carries ISO/IEC 17025:2017 certification.

 

Qualified Person

 

The scientific and technical information contained in this news release was approved by David Schonfeldt P.Geo, Calibre Mining’s Corporate Chief Geologist and a “Qualified Person” under National Instrument 43-101.

 

About Calibre Mining Corp.

 

Calibre Mining is a Canadian-listed, Americas focused, growing mid-tier gold producer with a strong pipeline of development and exploration opportunities across Nevada and Washington in the USA, and Nicaragua. Calibre is focused on delivering sustainable value for shareholders, local communities and all stakeholders through responsible operations and a disciplined approach to growth. With a strong balance sheet, a proven management team, strong operating cash flow, accretive development projects and district-scale exploration opportunities Calibre will unlock significant value.

Posted August 1, 2023

Share this news article

MORE or "UNCATEGORIZED"


Koryx Copper Closes Non-Brokered Private Placement and Completes Share Consolidation

Koryx Copper Inc. (TSX-V: KRY) is pleased to announce that it has... READ MORE

June 17, 2024

First Mining Closes Upsized $7 Million Flow-Through Equity Financing

First Mining Gold Corp. (TSX: FF) (OTCQX: FFMGF) (FRANKFURT: FMG)... READ MORE

June 17, 2024

Cornish Metals Announces Sale of Nickel King Property

Cornish Metals Inc. (TSX-V: CUSN) (AIM:CUSN) is pleased to announ... READ MORE

June 17, 2024

McEwen Mining Announces Closing of Flow-Through Financing

McEwen Mining Inc. (NYSE: MUX) (TSX: MUX) is pleased to report it... READ MORE

June 14, 2024

FRONTIER LITHIUM INTERSECTS 136.7M OF 1.32% Li2O AND EXTENDS SPARK PEGMATITE

Frontier Lithium Inc. (TSX-V: FL) (FRA: HL2) (OTCQX: LITOF) is pl... READ MORE

June 14, 2024

Copyright 2024 The Prospector News