The Prospector News

Balmoral Set to Resume Drilling on Detour Gold Trend Project

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

Balmoral Set to Resume Drilling on Detour Gold Trend Project

 

 

 

 

 

 

Balmoral Resources Ltd. (TSX:BAR) (OTCQX:BALMF) reports that crews have arrived into the Martiniere and Fenelon exploration camps on the Company’s wholly owned Detour Gold Trend Project in Quebec in preparation for the commencement of the winter 2014 drill program. Initial targets for the winter program include infill and expansion drilling of the high-grade Bug Lake and related gold zones on the Martiniere Property, follow-up testing of the recently announced VMS discovery also on Martiniere, follow-up testing of the Grasset gold discovery and initial testing of a high-priority nickel-copper-platinum-palladium (“Ni-Cu-PGE”) target outlined by the fall 2013 geophysical program on the Grasset Property. Current plans call for the completion of 5,000 to 6,000 metres of diamond drilling with two rigs. Balmoral’s strong cash position will allow it to immediately accelerate or expand the program as warranted by early results.

 

“With the strong results from the fall drill program at Martiniere we are excited to get the drills up and running again as we continue to expand the high-grade core of the Martiniere Gold System,” said Darin Wagner, President and CEO of Balmoral. “Outlining a large, well defined Ni-Cu-PGE target within the Project area adds another compelling element to the Balmoral story; a third leg to the stool which is already supported by expanding high-grade gold discoveries at Martiniere and emerging VMS potential.”

 

Bug Lake Expansion and Infill Drilling – Martiniere

 

The winter road to the Martiniere camp is now in place and drilling is anticipated to start on the Martiniere Property within the next 10 days. Drilling will focus on infill above the 300 metre vertical depth along the Bug Lake, Footwall and Hanging Wall Gold Zones. The Zones remain open to depth and additional drilling is also planned to trace the Zones between 275-375 metres vertical depth. To date only three holes have tested below 275 vertical metres along the entire 1,000 metre strike length of the system with all three holes successfully intersecting the Bug Lake Zone.

 

Additional follow-up drilling will look to expand the recent VMS and gold discoveries on the Property.

 

Ni-Cu-PGE and Gold Targets – Grasset

 

Drilling in 2012 identified both gold and Ni-Cu-PGE targets on the Company’s Grasset Property, located 40 kilometres east of Martiniere. Both discoveries were located proximal to the regional Sunday Lake Deformation Zone, and less than 5 kilometres from the Company’s all-season road accessible Fenelon base camp.

 

The Grasset gold discovery is centered on the northern contact of the Sunday Lake Deformation Zone a setting geologically analogous to the Detour Gold Mine located 80 kilometres to the west. The discovery hole returned an intercept of 1.66 g/t gold over 33.00 metres including two higher grade intervals – 6.15 g/t gold over 4.04 metres and 4.18 g/t gold over 5.00 metres.

 

Also in 2012 drill testing 1,000 metres east of the Grasset gold occurrence intersected a strongly anomalous zone of magmatic Ni-Cu-PGE mineralization (9.17 m grading 0.51% nickel, 0.09% copper and 0.48 g/t platinum+palladium; see NR12-14, May 23, 2012). This discovery occurs at the south-eastern termination of a 10+ kilometre long belt on ultramafic lithologies which straddles the Grasset and adjoining Fenelon Properties. Historic exploration had identified similar Ni-Cu-PGE mineralization within this sequence 8.3 kilometres northwest of Balmoral’s discovery indicating the presence of an extensive nickel, copper, PGE bearing magmatic sulphide system.

 

Follow-up geophysical work, conducted during the fall of 2013, outlined a strong, 1,100 metre long chargeability anomaly trending northwest from the Balmoral nickel discovery. This anomaly tracks along the northeastern (basal) contact of the ultramafic sequence (as indicated by the Company’s airborne magnetic data) and is coincident with a series of EM conductors tracking the same contact.

 

Other than Balmoral’s discovery hole, located at the extreme southern end, the chargeability and EM anomalies have never been drill tested. Additionally there is no drilling for several kilometres to the northwest along the trend toward the historic Ni-Cu-PGE occurrences. A presentation outlining the Grasset Ni-Cu-PGE target and related geophysical data has been posted on the Company’s website at www.balmoralresources.com/s/Grasset.asp. Drilling is anticipated to begin to test this promising new target in early February.

 

Balmoral has also completed the acquisition, by staking, of a 100% interest in 66 additional mineral claims in the Grasset area covering potential extensions of the host sequence to the Ni-Cu-PGE target.

 

Quality Control

 

Mr. Darin Wagner (P.Geo.), President and CEO of the Company, is the non-independent qualified person for the technical disclosure contained in this news release. Mr. Wagner has supervised the work programs on the Martiniere and Grasset Properties, visited the properties on multiple occasions, examined the drill core and/or photographs from the holes summarized in this release, discussed, reviewed the results with senior on-site geological staff and reviewed the available analytical and quality control results.

 

Balmoral has implemented a quality control program for all of its drill programs, to ensure best practice in the sampling and analysis of the drill core, which includes the insertion of blind blanks, duplicates and certified standards into sample stream. NQ sized drill core is saw cut with half of the drill core sampled at intervals based on geological criteria including lithology, visual mineralization and alteration. The remaining half of the core is stored on-site at the Company’s Martiniere field camp in Central Quebec. Drill core samples are transported in sealed bags to ALS Minerals Val d’Or, Quebec analytical facilities. Gold analyses are obtained via industry standard fire assay with atomic absorption finish using 30 g aliquots. For samples returning greater than 5.00 g/t gold follow-up fire assay analysis with a gravimetric finish is completed. The Company has also requested that any samples returning greater than 10.00 g/t gold undergo screen metallic fire assay. Following receipt of assays visual analysis of mineralized intercepts is conducted and additional analysis may be requested. ALS Minerals is ISO 9001:2008 certified and the Val d’Or facilities are ISO 17025 certified for gold analysis.

 

About Balmoral Resources Ltd

 

Balmoral is a Canadian-based precious metal exploration and development company focused on the expansion and delineation of high-grade gold discoveries along the Detour Gold Trend in Quebec, Canada. With a philosophy of creating value through the drill bit and with a focus on proven productive precious metal belts, Balmoral is following an established formula with a goal of maximizing shareholder value through discovery and definition of high-grade, Canadian gold assets.

Posted January 29, 2014

Share this news article

MORE or "UNCATEGORIZED"


Imperial Mining Receives Final Crater Lake Drill Results: Data Sent to Engineers for 43-101 Resource Estimation on TG Zone

Highlights: Assay results from the first four drillholes continue... READ MORE

June 23, 2021

Osisko Windfall Infill and Expansion Drilling Adds High-Grade

385 g/t Au Over 2.1 Metres 45.5 g/t Au over 4.1 Metres Osi... READ MORE

June 23, 2021

Amarillo drills 144.6 m of 0.7 g/t gold including 91.6 m at 0.9 g/t gold at LDS

Amarillo Gold Corporation (TSX-V: AGC) (OTCQB: AGCBF), through i... READ MORE

June 23, 2021

New Found Intercepts 150.3 g/t Au over 11.5m at Lotto

New Found Gold Corp.  (TSX-V: NFG) (OTC: NFGFF) is pleased to a... READ MORE

June 23, 2021

Palladium One Drills 7.4% Ni_Eq (164 lbs/tonne) over 4.5 Meters Including 10.2% Ni_Eq (224 lbs/tonne) over 1.7 Meters at Tyko Nickel-Copper Project, in Ontario, Canada

KEY HIGHLIGHTS Nickel-copper continuity confirmed along 350-meter... READ MORE

June 23, 2021

Copyright 2021 The Prospector News