The Prospector News

Angold Extends Mineralization, Intersects Two New Zones at Dorado

You have opened a direct link to the current edition PDF

Open PDF Close
Uncategorized

Share this news article

 

 

 

 

 

Angold Resources Ltd. (TSX-V: AAU) (FRA: 13L1)  is pleased to announce that it has received further favorable assay results for holes DO-21-02 and DO-21-03 from drilling on the Lajitas historic resource, at the Company’s Dorado project located in the Maricunga belt of Chile.

 

The most favorable intercepts in this second batch of assay results were 110 m at 0.75 g/t Au in DO-21-02 and 140 m at 0.82 g/t Au in DO-21-03, thus demonstrating excellent continuity of mineralization at Lajitas. Assayed grades of up to 4.06 g/t Au (over 2 m) also confirm the high grade potential of this target.

 

First assay results, including the intercept of 302 m at 0.71 g/t Au from surface in DO-21-01 are outlined in the Company’s news release dated February 16, 2021.

 

Angold’s CEO, Mr. Adrian Rothwell, stated: “With early results confirming higher grades than in historic drilling, long intercepts, and identifying continuous mineralization in new zones, we are confident in the expansion potential of the Lajitas historic resource.”

 

Assays from the second and third drill holes have identified new areas of mineralization:

  • In DO-21-02 east of the East Zone, intersecting mineralization in an area not previously drilled; and
  • In DO-21-03, extending mineralization approximately 50 m to the north of holes DO-21-01 and DO-21-02.

 

Together, these drill holes demonstrate depth and strike continuity of the East Zone of mineralization, which was intersected from surface in hole DO-21-01. They also suggest that the mineralization in the East Zone strikes north-northeast and dips steeply to the east. Additional holes are planned to test extensions of this mineralization at depth and to the northeast and southwest (Figures 1 and 2).

 

Mineralization observed in drill core continues to be typical of Maricunga-style gold porphyry deposits, consisting dominantly of banded quartz-magnetite veins (Figure 3), with apparent overprinting of a telescoped epithermal system.

 

Assay results from the remainders of holes DO-21-02 and DO-21-03 are in progress (Table 1). The Company has planned a total program of approximately 5,000 m over 10 holes.

 

DRILL RESULTS

 

Angold’s second drill hole DO-21-02 has intersected a new zone of mineralization in an area not previously drilled. Although lower grade, the intercept of 16 m at 0.35 g/t Au from 58 m downhole demonstrates expansion potential for the deposit.

 

Drill hole DO-21-02 assayed 110 m grading 0.75 g/t Au, including two separate higher-grade intervals of 30 m @ 1.04 g/t Au and 32 m of 1.11 g/t Au. Hole DO-21-02 also intersected a second new zone of mineralization to the east of the East Zone, grading 0.38 g/t Au over 16 m, from 116 m downhole. The last assays received for hole DO-21-02 averaged 0.51 g/t Au over 6 m, with assays pending below the final assay of 1.03 g/t Au at 412-414 m downhole. This may be a deeper portion of the West Zone of mineralization (Figure 2). Drill hole DO-21-02 was drilled from east to west to test the NNE structural corridor controlling the mineralization. and has added additional mineralization to the east of intercepts in DO-21-01 and other historical drilling in the area (Figures 1 and 2).

 

Drill hole DO-21-03 assayed 140 m grading 0.82 g/t Au, including 74 m @ 1.25 g/t Au (Figures 1 and 2). This hole was drilled from northwest to southeast and extends mineralization approximately 50 m to the north of holes DO-21-01 and 02. The 140-m interval in DO-21-03 ended in mineralization, with mineralization observed in drill core below 308 m downhole and assays pending.

 

Table 1: Assay Results

 

Hole ID Length, m g/t Au From, m To, m Notes
DO-21-01 302 0.71 0 302
including 34 0.90 76 110
and 68 1.30 156 224
DO-21-02 16 0.35 58 74
DO-21-02 16 0.38 116 132
DO-21-02 110 0.75 200 310
including 30 1.04 228 258
and 32 1.11 270 298
DO-21-02 6 0.51 408 414 Open at depth, with assays pending
DO-21-03 140 0.82 168 308 Open at depth, with assays pending
including 74 1.25 194 268

 

Table 2. Dorado drill-hole collar table.

 

Hole ID Collar
East
WGS84
Collar
North
WGS84
CollarElev m Collar Az Collar Dip Total Depth m
DO-21-01 507080 6980110 4562 120 -60 540
DO-21-02 507350 6979975 4555 290 -45 484.5
DO-21-03 507093 6980248 4583 164 -54 513.7
DO-21-04 507200 6979970 4521 282 -70 in progress
DO-21-05 506893 6980142 4525 110 -60 in progress

 

Figure 1. Map of Angold’s Dorado drill results and historic drilling.

 

Figure 2. Cross section looking north at Angold Dorado drill results and historical drilling.

 

Figure 3. Black banded quartz-magnetite vein at a depth of 252.7 m in drill hole DO-21-03. This vein is within a 2-m interval (252-254 m) grading 4.06 g/t Au, a relatively high-grade assay for Maricunga mineralization.

 

More news on the Company’s planned drill program may be obtained in the news release on January 12, 2021: https://www.angoldresources.com/post/angold-resources-begins-drilling-at-dorado.

 

QAQC Statement

All of Angold Resources’ drill sample assay results have been independently monitored through a quality assurance/quality control (“QA/QC”) protocol which includes the insertion of blind standard reference materials, blanks, and duplicates at regular intervals. Logging and sampling of the Dorado drill samples were completed at Angold’s core handling facilities located in Copiapo, Chile. Drill core was diamond sawn on site and half drill-core samples were securely transported to ALS Laboratories’ (“ALS”) sample preparation facility in Copiapo.

 

Gold content was determined by fire assay of a 50-gram charge with atomic absorption finish (ALS method Au-AA24). Thirty-three other elements were analyzed by ICP methods with four-acid digestion (ALS method ME-ICP61m). ALS Laboratories is independent of Angold Resources and its facilities are ISO 17025 accredited. ALS also performed its own internal QA/QC procedures to assure the accuracy and integrity of results. Parameters for ALS’ internal and Angold’s external blind quality control samples were acceptable for the samples analyzed. Angold is not aware of any drilling, sampling, recovery, or other factors that could materially affect the accuracy or reliability of its drill results data.

 

Qualified Person

David Smith, CPG, the VP Global Exploration for Angold and a Qualified Person in accordance with National Instrument 43-101, is responsible for supervising the exploration programs at Angold’s projects and has reviewed and approved the technical information contained in this news release.

 

About Angold

Angold is an exploration and development company targeting large-scale mineral systems in the proven districts of the Maricunga, Nevada and Ontario. Angold owns a 100% interest in the Dorado, Cordillera and South Bay-Uchi projects, and certain claims that append the optioned Iron Butte project.

 

Posted March 16, 2021

Share this news article

MORE or "UNCATEGORIZED"


Kirkland Lake Gold Reports Solid Production in First Quarter 2021

Kirkland Lake Gold Ltd. (TSX:KL) (NYSE:KL) (ASX:KLA) announced pr... READ MORE

April 9, 2021

Ascot Resources Ltd. Announces Closing of C$61,000,000 Bought Deal Financing

Ascot Resources Ltd. (TSX: AOT) (OTCQX: AOTVF) is pleased to ann... READ MORE

April 9, 2021

Rio Tinto reaches agreement with Turquoise Hill Resources on financing plan for Oyu Tolgoi

Rio Tinto has entered into a binding Heads of Agreement with Turq... READ MORE

April 9, 2021

Frontier Lithium Announces Acquisition of the 2.5% Net Smelter Royalty on the PAK Lithium Project

Frontier Lithium Inc. (TSX-V: FL) (OTCQX: LITOF) (FSE: HL2) annou... READ MORE

April 9, 2021

Uranium Energy Corp Completes Financing and Reports Over $110 Million in Cash, Equity and Inventory Holdings as of April 9, 2021

Uranium Energy Corp (NYSE: UEC) is pleased to announce the closin... READ MORE

April 9, 2021

Copyright 2021 The Prospector News