Bonterra Resources Inc. (TSX-V: BTR) (OTCQX: BONXF) (FSE: 9BR1) is pleased to announce drill results from the underground drill campaign at the Moroy zone, including the following new high-grade results:
These new results both confirm the extent and continuity of the Moroy zone. The diamond drilling campaign also succeeded in defining the Moroy zones M1 and M2. Highlighted drill intersections are provided in the table below.
The Moroy Deposit is a parallel system to the Bachelor Mine and shows similarities with Bachelor in terms of geology, geometry, size and continuity. Located 1 km south, Moroy has been outlined over a strike length of 400 metres and a vertical extent of 600 metres. The mineralized zones consist of hematized brecciated stockwork associated with pyrite. Bonterra will include these results in its upcoming mineral resources estimate and will focus on expansion drilling in the Moroy zones, which remain open to the West and East, along the mineralization plunge.
Drilling highlights:
Hole # | From (m) | To (m) | Length (m)* | Grade Au (g/t) |
Zone |
MY18-028 | 250.4 | 254.1 | 3.7 | 5.0 | M2 |
MY18-082 | 150.0 | 152.7 | 2.7 | 12.0 | M1 |
MY18-084 | 123.0 | 129.0 | 6.0 | 6.9 | M1 |
MY18-086 | 16.8 | 17.6 | 0.8 | 19.3 | M1 |
MY18-089 | 173.8 | 188.1 | 14.3 | 4.9 | M1 |
MY18-097 | 104.7 | 107.7 | 3.0 | 7.8 | M1 |
MY18-098 | 19.6 | 24.2 | 4.6 | 9.3 | M2 |
MY18-099 | 125.2 | 128.6 | 3.4 | 4.8 | M1 |
MY18-100 | 108.2 | 122.1 | 13.9 | 4.1 | M1 |
MY18-105 | 85.4 | 87.2 | 1.8 | 13.3 | M1 |
MY18-106 | 234.6 | 238.9 | 4.3 | 12.3 | M1 |
MY18-112 | 116.6 | 122.0 | 5.4 | 8.8 | M1 |
Including | 116.6 | 119.1 | 2.4 | 18.1 | M1 |
MY18-115 | 88.6 | 106.3 | 17.7 | 4.4 | M1 |
Including | 98.4 | 100.4 | 2.0 | 12.2 | M1 |
MY18-120 | 14.1 | 17.9 | 3.8 | 8.5 | M1 |
Including | 15.1 | 17.3 | 2.2 | 11.9 | M1 |
MY18-120 | 105.1 | 117.2 | 12.1 | 7.9 | M1 |
MY18-124 | 119.4 | 121.5 | 2.1 | 18.3 | M1 |
MY18-127 | 182.6 | 185.8 | 3.2 | 11.7 | M1 |
MY18-130 | 251.1 | 256.1 | 5.0 | 9.6 | M1 |
MY18-131 | 246.7 | 248.9 | 2.2 | 8.9 | M1 |
MY18-135 | 145.9 | 154.7 | 8.8 | 7.2 | M1 |
MY18-138 | 123.5 | 127.6 | 4.1 | 15.5 | M1 |
MY18-140 | 161.6 | 165.9 | 4.3 | 11.4 | M1 |
MY19-146 | 93.7 | 95.5 | 1.8 | 20.4 | M1 |
*Stated lengths are core width as drilled, true widths vary and average between 75 and 90 percent of drilled widths.
Highlights on the Moroy deposit:
Quality Control and Reporting Protocols
The Company uses a rigorous QA-QC analytical program according to industry standards. The analytical results were done by pyroanalysis (A.A.) at the mine laboratory. Blanks, duplicates and certified reference standards are inserted into the sample stream to monitor laboratory performance. The company’s QA-QC analytical verification program requires that a minimum of 5% of the samples be audited at an independent laboratory. These audit assays were sent to ALS laboratory located in Val-d’Or, Quebec. The results of the audits are consistent with those obtained.
Bonterra Resources Quick Facts:
Pascal Hamelin, P.Eng. has approved the information contained in this release. Mr. Hamelin, Bonterra’s VP Operations, is a Qualified Person as defined by NI 43-101.
Vizsla Silver Corp. (TSX-V: VZLA) (NYSE: VZLA) (Frankfurt: 0G3) i... READ MORE
Reunion Gold Corporation (TSX-V: RGD) (OTCQX: RGDFF) is pleased t... READ MORE
STLLR Gold Inc. (TSX: STLR) (OTCQX: STLRF) (FSE: O9D) announces ... READ MORE
Consolidated copper production is expected to average 153,000i to... READ MORE
Aya Gold & Silver Inc. (TSX: AYA) (OTCQX: AYASF) is pleased t... READ MORE