Uncategorized
Share this news article...
Share on LinkedIn
Linkedin
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Email this to someone
email

Kintavar drills 51m @ 0.24% Cu, Opens the Sherlock Zone to the East

 

 

 

 

 

Kintavar Exploration Inc. (TSX-V: KTR) (FRANKFURT: 58V) is pleased to announce drilling results for the eastern portion of the Sherlock zone. Drilling in December focused on testing the four main horizons (A-D) which are stacked together in the Sherlock zone. Drill holes MS-37 to MS-39 were testing the south-eastern extensions of horizon A while hole MS-41 was primarily testing the north-eastern horizon C extensions. Drilling assays of hole MS-46, which was testing horizons B, C and D in the western extension, are pending.

 

“The eastern portion of the Sherlock zone was less worked with the only drilling and trenching to date being the Toby area. The December program validated our interpretation and fully opened up that area. Going from only horizon B to the East to now confirmed A, B and C horizons is a major success for our geological model and gives us the confidence to do another large step out to the East to add more mineralized material in what we believe is shaping up to be a large volume open pit potential project. Next steps would be confirming horizon D to the East and to keep extending the entire mineralized sedimentary sequence as we follow the main structure,” comments Kiril Mugerman, President & CEO of Kintavar.

 

The center point of the Sherlock zone is based on cross section 3+50 (Figure 1) and shows the new geological interpretation of the stacked horizons, their extension at depth and to surface. Drill hole MS-41, total length of 330m, which is on cross section 5+50 (Figure 2), was testing the extensions to the East where mineralization was yet to be identified on surface. The drilling result of 80.90m @ 0.19% Cu at a depth of 190m, including 51m @ 0.24% Cu, confirms the Corporation’s geological interpretation and opens the entire north-eastern portion of the Sherlock zone which has seen no trenching or drilling until now. Furthermore, the interval includes several mineralized zones a few of which are very high grade such as 5.8m @ 1.52% Cu and 2m @ 1.21% Cu. These zones are of particular interest as the Corporation advances its metallurgical and ore sorting test work.

 

In parallel to that work, shallow drill holes MS-37 (42.6m @ 0.16% Cu from surface), MS-38 (46.3m @ 0.20% Cu from surface) and MS-39 (extension of hole MS-38 to the south, 12.1m @ 0.19% Cu from surface, had to be stopped in mineralization at 36m due to technical problems) provided confirmations of horizon A extension to the East. That work will continue during the next exploration program.

 

Figure 3 shows the plan view of the local geology and the surface projection of the mineralized marble horizons.

 

Figure 1: Cross section 3+50E is available at

http://www.globenewswire.com/NewsRoom/AttachmentNg/7b964dcd-ee13-4973-a92d-e45b1d4f32a1. Click here for full size image

 

Figure 2: Cross Section 5+50E is available at

http://www.globenewswire.com/NewsRoom/AttachmentNg/6c3ce4fd-ad09-408c-9586-bdab4405633e. Click here for full size image

 

Figure 3: Plan view, surface projection is available at

http://www.globenewswire.com/NewsRoom/AttachmentNg/a1405349-2fda-48fc-b564-dde1296806ff. Click here for full size image

 

 

  Drillhole UTM X N83Z18 UTM Y Azimut / Dip Lenght (m)   From (m) To (m) Thickness(1) Cu % Ag (g/t)
Sherlock-South MS-18-37 483757 5252923 N330 / -45 180   3.00 59.60 56.60 0.14 1.2
incl 12.00 31.70 19.70 0.21 1.7
and 81.00 95.00 14.00 0.11 0.9
MS-18-38 483793 5252934 N330 / -45 141   4.70 51.00 46.30 0.20 2.0
incl 5.70 25.00 19.30 0.35 3.3
incl 18.00 25.00 7.00 0.52 4.8
MS-18-39 483798 5252940 N150 / -45 36   11.90 36.00 24.10 0.11 0.9
incl 18.00 24.00 6.00 0.37 3.2
Toby MS-18-40 483820 5253015 N000 / -45 114 Intrusive unit NSV(2) NSV
Sherlock-South MS-18-41 483841 5252929 N330 / -45 330   4.30 24.50 20.20 0.11 0.8
incl 4.30 9.00 4.70 0.31 2.7
Sherlock North-East   190.50 271.40 80.90 0.19 1.1
incl 220.40 271.40 51.00 0.24 1.3
incl 220.40 226.20 5.80 1.52 7.5
and 269.40 271.40 2.00 1.21 7.2
Sherlock-South MS-18-42 483814 5252973 N150 / -45 105   46.45 51.00 4.55 0.12 1.3
(1): True thickness is estimated at 45 to 80% of the intersected thickness
(2) : No significant value

 

Table 1: assays for drill holes MS-37 to MS-42

 

All samples have been sent and prepared (PREP-31) by ALS Global laboratory in Val-d’Or. The pulp was sent to ALS Global laboratory in Vancouver for copper assays (CU-ICP61), silver assays (AG-ICP61) or a multi-elemental analysis by four acid digestion (ME-ICP61) and spectroscopy (ICP-AES/MS). Samples with assays higher than 10,000 ppm Cu were reanalyzed by atomic absorption (CU-OG62) at the ALS Global Vancouver laboratory. Quality controls include systematic addition of blank samples and certified copper standards to each batch of samples sent to the laboratory.

 

NI-43-101 Disclosure

 

Alain Cayer, P.Geo., MSc., Vice-President Exploration of Kintavar, is Qualified Person under NI 43‐101 guidelines who supervised and approved the preparation of the technical information in this news release. 

 

About Kintavar Exploration & the Mitchi Property

 

 

Kintavar Exploration is a Canadian mineral exploration Corporation engaged in the acquisition, assessment, exploration and development of gold and base metal mineral properties. It’s flagship project is the Mitchi property (approx. 30,000 hectares, 100% owned) located west of the Mitchinamecus reservoir, 100 km north of the town of Mont-Laurier. The property covers an area of more than 300 km2 accessible by a network of logging and gravel roads with a hydro-electric power substation located 14 km to the east. The property is located in the north-western portion of the central metasedimentary belt of the Grenville geological province. Many gold, copper, silver and/or manganese mineralized showings have been identified to date, with many characteristics suggesting of a sediment-hosted stratiform copper type mineralization (SSC) in the Eastern portion of the property and Iron Oxide Copper Gold (IOCG) and skarn type mineralization in the Western portion. Osisko holds a 2% NSR on 27 claims of the southern portion of the Mitchi property, outside of the sedimentary basin.

 

Posted February 11, 2019

Share this news article...
Share on LinkedIn
Linkedin
Share on Facebook
Facebook
Tweet about this on Twitter
Twitter
Email this to someone
email

MORE or "UNCATEGORIZED"


Bonterra intersects 7.9 g/t Au over 12.1 metres at Moroy

Bonterra Resources Inc. (TSX-V: BTR) (OTCQX: BONXF) (FSE: 9BR1)&n... READ MORE

February 21, 2019

Wallbridge Intersects 12.70 g/t gold over 2.71 metres within Newly Discovered Broad Gold Mineralization 300 metres Southwest of the Fenelon Deposit

Wallbridge Mining Company Limited (TSX:WM) (FWB: WC7)is ple... READ MORE

February 21, 2019

Atlantic Gold Announces Final Results from Resource Extension Programs at Fifteen Mile Stream & Cochrane Hill Gold Deposits

Atlantic Gold Corporation (TSX-V: AGB) is pleased to provide fina... READ MORE

February 21, 2019

Northern Vertex Financing Oversubscribed at US$2.6 Million From US$2 Million, Closes Initial Tranche of US$2 Million

Northern Vertex Mining Corp. (TSX-V: NEE)(OTC Nasdaq Intl.:... READ MORE

February 21, 2019

Continental Gold Discovers a Third Broad Mineralized Zone at Buriticá With High-Grade Gold Drill Results Including 5.50 Metres @ 202.56 Grams per Tonne Gold Equivalent

Continental Gold Inc. (TSX:CNL) (OTCQX:CGOOF) is pleased to annou... READ MORE

February 21, 2019

Copyright 2019 The Prospector News - Site design by Spyderbaby Productions