Share this news article...
Share on LinkedIn
Share on Facebook
Tweet about this on Twitter
Share on Google+
Email this to someone

Ascot Intercepts High-Grade Gold in the Unicorn and Province Zones at Big Missouri






Ascot Resources Ltd (TSX-V: AOT) (OTCQX: AOTVF) is pleased to announce that drilling at Big Missouri has intercepted high-grade gold mineralization in the Unicorn and Province zones. Highlights of this release include:


  • 5.8m of 14.30g/t AuEq* in hole P18-1678 at the Unicorn zone
  • 4.0m of 6.53g/t AuEq in hole P18-1708 at the Unicorn zone
  • 2.0m of 25.45g/t AuEq in hole P18-1691 at the Province zone
  • 2.0m of 14.65g/t AuEq in hole P18-1696 at the Province zone



Derek White, President and CEO of Ascot Resources commented, “The clustered high-grade intercepts near surface in the Province zone and the new intercepts at Unicorn look very good. These new results increase our confidence that the resource update for the Premier and Big Missouri areas will establish a sufficient resource base to restart the Premier Mill. Additional drill results will be reported shortly and we anticipate similar successful results.”



The Company is working towards recommencing underground production at the Premier site near Stewart, B.C. using existing facilities and infrastructure (mill building, tailings facility, underground development and power line). The current drill program is an integral part in the process to expand the existing resource base in support of engineering studies that commenced in the second quarter of 2018.



This news release summarizes the results from 37 drill holes at the Big Missouri ridge at Ascot’s Premier-Dilworth Property. The drill density at Big Missouri was historically designed to establish low-grade, high-tonnage open pit potential. The new vision of the Ascot management team is to identify high-grade zones of mineralization that can be extracted from underground. A higher drill density will be required to discover and define all high-grade zones in the area. Locations of drill pads and drill traces are illustrated in Figure 1.






The Unicorn area is a target zone to the northeast of the S1 pit (see Figure 1) at the Big Missouri ridge, five kilometres to the north of the Premier Mill. Three fans of drill holes were completed from three different pads for a total of thirteen drill holes. Mineralization was intercepted at three different levels, near surface, at 20-45m depth and around 100m depth. The main zone of mineralization is a gently northeast plunging sheet at a depth of around 40m. Several drill holes intercepted gold grades in excess of 10 grams per tonne (g/t), forming a high-grade zone around pads BM18 and BM19. This zone may be accessible from the northern pit wall of the S1 pit. Drill results from the Unicorn zone are summarized in Table 1.


* For equivalency calculation refer to footnotes of Tables 1 and 2.



Figure 1 Plan view of the S1 pit area at Big Missouri showing the location of the Unicorn and Province zones, pad locations and drill traces of the drill holes reported in this release (red traces are holes in this release, tan coloured traces have been reported previously). Table five details the coordinates of all new drill pads.



A photo accompanying this announcement is available at




Table 1 Summary of the drill results from the Unicorn zone at Big Missouri.



Hole # azimuth/dip   From (m) To (m) Width (m) Au (g/t) Ag (g/t) AuEq (g/t)
P18-1672 90/-50   29.60 35.30 5.70 1.89 5.6 1.93
    incl. 34.15 35.30 1.15 6.03 15.7 6.14
P18-1673 90/-60   25.30 32.30 7.00 2.60 10.6 2.67
    incl. 30.30 31.30 1.00 9.46 51.9 9.81
    also 87.40 91.00 3.60 1.9 3.2 1.92
P18-1674 90/-45   3.05 10.20 7.15 4.01 14.4 4.11
    also 99.00 101.00 2.00 4.22 76.1 4.74
P18-1677 90/-70   23.00 29.00 6.00 3.47 4.3 3.50
    incl. 26.00 27.00 1.00 12.20 7.6 12.25
P18-1678 90/-80   24.20 30.00 5.80 14.22 11.5 14.30
    incl. 26.20 27.20 1.00 48.80 23.4 48.96
P18-1679 270/-70   14.30 18.30 4.00 3.89 8.0 3.94
P18-1702 90/-55 No significant intercept
P18-1703 90/-70   25.00 33.00 8.00 1.81 3.3 1.83
    also 94.00 98.00 4.00 1.59 3.6 1.61
P18-1704 270/-55   25.70 35.00 9.30 1.51 4.1 1.54
    incl. 25.70 28.00 2.30 4.10 5.8 4.14
P18-1705 270/-70 No significant intercept
P18-1706 90/-60   46.00 48.00 2.00 11.41 8.0 11.46
P18-1707 90/-70   44.00 45.00 1.00 79.68 12.0 79.76
P18-1708 90/-75   28.90 36.00 7.10 1.50 4.1 1.53
    incl. 29.90 32.00 2.10 3.50 8.1 3.55
    also 102.00 106.00 4.00 6.45 12.0 6.53
    incl. 102.00 104.00 2.00 8.94 13.0 9.03



Gold equivalence was calculated using a ratio of 65:1 Ag:Au and Ag recovery of 45.2%.
True width is believed to be approximately 80-90% of reported intercepts.






The Province zone is located at the top of the Big Missouri ridge to the west and southwest of the S1 pit. Mineralization at the Province zone occurs close to surface at a higher elevation than the main Big Missouri zone that was mined in the S1 pit. Sixteen holes were drilled from two pads in starfish patterns in order to test this zone. There is a similar northeast trend of the mineralization as drill holes at the southern pad (BM15) intercepted stronger and more consistent mineralization than the holes at pad BM16 which appears to be located just to the north of the main trend.



Five of the holes at the Province zone were drilled to a greater depth in order to test the main Big Missouri zone, which is the continuation of the zone that was mined in the S1 pit. Holes P18-1670, P18-1692 and P18-1693 intercepted the Big Missouri zone at a depth of approximately 190m. Drill hole P18-1693 intercepted a third level of mineralization one hundred metres below the Big Missouri zone. The results from these drill holes demonstrate that mineralization at the Big Missouri ridge occurs at three different elevations and that the potential for high-grade zones is good at every level. Drill results from the Province zone are summarized in Table 2.



Table 2 Summary of the drill results from the Province zone at Big Missouri.




Hole # azimuth/dip   From (m) To (m) Width (m) Au (g/t) Ag (g/t) AuEq (g/t)
P18-1668 270/-45   3.05 6.85 3.80 1.88 6.2 1.92
P18-1669 270/-65 No significant intercept
P18-1670 270/-85   187.70 189.10 1.40 2.08 6.6 2.12
P18-1671 235/-45   3.05 8.23 5.18 1.26 5.3 1.30
    incl. 3.05 5.18 2.13 2.37 9.2 2.43
P18-1675 90/-80 No significant intercept
P18-1680 135/-45 No significant intercept
P18-1689 270/-45   3.05 27.27 24.22 1.13 3.8 1.16
    incl. 23.00 25.13 2.13 5.14 3.2 5.16
P18-1690 270/-60   3.05 13.00 9.95 1.33 3.3 1.35
    incl. 9.00 11.00 2.00 3.60 5.7 3.64
P18-1691 270/-77   1.52 20.00 18.48 3.18 3.4 3.20
    incl. 10.00 12.00 2.00 25.40 8.0 25.45
P18-1692 270/-83   179.50 187.00 7.50 5.70 9.2 5.76
    incl. 181.10 183.00 1.90 12.85 15.1 12.95
P18-1693 270/-88   167.80 168.80 1.00 9.84 7.8 9.89
    also 186.00 190.00 4.00 2.78 6.8 2.83
    also 298.00 302.00 4.00 4.38 4.5 4.41
P18-1694 225/-45   1.52 24.00 22.48 2.48 3.8 2.51
    incl. 6.00 16.00 10.00 4.68 5.4 4.72
    incl. 14.00 16.00 2.00 13.10 6.0 13.14
P18-1695 180/-45 No significant intercept
P18-1696 135/-45   1.52 14.00 12.48 2.97 4.0 3.00
    incl. 8.00 10.00 2.00 14.60 7.7 14.65
P18-1697 90/-45 No significant intercept


Gold equivalence was calculated using a ratio of 65:1 Ag:Au and Ag recovery of 45.2%.
True width is believed to be approximately 80-90% of reported intercepts.



Big Missouri West



Nine additional holes were completed in an area to the west of the S1 pit (see Figure 1). The drill holes generally intercepted a breccia horizon and anomalous to low-grade gold mineralization. These holes were drilled from pads BM6 and BM7 and were originally designed to test the western extension of the mineralization that was mined in the S1 pit. As the results from the 2018 drill campaign at Big Missouri become available, it appears that high-grade zones within the low-grade open pit envelope follow pronounced parallel northeast trends. The drill holes at these pads did not intercept the main high-grade trend and seem to outline an area of background mineralization. The drill results from the Big Missouri west pads are summarized in Table 3.



Table 3 Summary of the drill results from Big Missouri Northwest.




Hole # azimuth/dip   From (m) To (m) Width (m) Au (g/t) Ag (g/t) AuEq (g/t)
P18-1667 270/-85   175.00 188.60 13.60 1.28 3.0 1.30
    also 214.00 216.30 2.30 1.93 4.2 1.96
P18-1681 90/-45 No significant intercept
P18-1682 90/-65   201.00 205.00 4.00 1.97 5.6 2.01
P18-1683 90/-75   217.00 219.00 2.00 1.70 3.3 1.72
P18-1684 90/-85   175.50 195.10 19.60 1.70 3.7 1.73
    incl. 193.00 195.10 2.10 7.15 3.6 7.17
P18-1685 180/-45 No significant intercept
P18-1686 270/-45   3.05 7.00 3.95 3.36 43.8 3.66
P18-1687 270/-60 No significant intercept
P18-1688 270/-87   24.00 26.00 2.00 1.99 2.0 2.00


Gold equivalence was calculated using a ratio of 65:1 Ag:Au and Ag recovery of 45.2%.
True width is believed to be approximately 80-90% of reported intercepts.



Table 4 Drill pad locations.




Pad # UTM N UTM E Elevation Hole no.
BM6 6219400 436298 1080 1667
BM7 6219375 436295 1083 1681-1688
BM15 6219200 436293 1066 1668-1671, 1675, 1680
BM16 6219250 436286 1072 1689-1697
BM18 6219500 436630 971 1672-1674, 1677-1679
BM19 6219550 436660 974 1706-1708
BM20 6219575 436661 978 1702-1705



Engineering Studies



Several consulting groups have been engaged by the Company in order to provide all relevant data for permitting and preliminary engineering. Currently there is a hydrogeological drill program in progress that will establish a number of monitoring wells in support of a hydrogeological flow model.



Ascot personnel are in the process of assembling three metallurgical composites for test work to confirm historical parameters such as hardness and gold recovery. Process optimization appears to be possible in a variety of areas and will be investigated further.



Additional work is underway in the areas of underground mine design and the refurbishment of the mill.



Quality Assurance/Quality Control



Graeme Evans, P. Geo, and Lawrence Tsang, P. Geo, the Company’s Project Geologists provide the field management for the Premier exploration program. Graeme Evans, non-independent Consulting Geologist, is the Company’s Qualified Person (QP) as defined by National Instrument 43-101 and has reviewed and approved the technical contents of this news release.



Analytical work is being carried out by ALS Global and SGS Canada Inc. Ascot’s quality-assurance and quality-control program includes the use of analytical blanks to monitor for cross contamination, certified reference material standards to assess analytical accuracy, and duplicate samples to quantify sampling precision. This is in addition to the internal quality assurance program employed by ALS and SGS.



At ALS and SGS, samples are dried and weighed. They are then crushed to 75% passing 2mm, with 250g split and pulverized to 85% passing 75µm. Since early June, samples are crushed and split on site by a mobile lab supplied by SGS and run by SGS personnel. All samples are digested using aqua-regia with an ICP-AES finish and fire assay with AA finish for gold. Samples over 100ppm silver are digested with aqua regia and then volumetrically diluted before an ICP-AES or AA finish (up to 1,500ppm). Samples over 1,500ppm silver are fire assayed with a gravimetric finish. Samples over 10ppm gold are fire assayed with a gravimetric finish. Identified or suspected metallic gold or silver are subjected to “metallics” assays. Sampling and storage are at the company’s secure facility in Stewart.



About Ascot Resources Ltd.


Ascot Resources is a gold and silver focused exploration company with a portfolio of advanced and grassroots projects in the Golden Triangle region of British Columbia. The company’s flagship Premier Project is a near-term high-grade advanced exploration project with large upside potential. Ascot is poised to be the next Golden Triangle producer with an experienced and successful exploration, development and operating team, coupled with a highly regarded major shareholder.


Posted August 9, 2018

Share this news article...
Share on LinkedIn
Share on Facebook
Tweet about this on Twitter
Share on Google+
Email this to someone


Pacton Gold Closes $2.1 Million Flow-Through Private Placement Led by Sprott Asset Management L.P.

Pacton Gold Inc. (TSX-V: PAC) (OTC: PACXF) (FSE: 2NKN) is pleased... READ MORE

December 14, 2018

Seabridge Gold Receives $3.5 Million in Option Exercise

Seabridge Gold Inc. (TSX: SEA) (NYSE: SA) announced today that th... READ MORE

December 14, 2018

Barrick Announces Additional Investment in Reunion Gold Corporation

Barrick Announces Additional Investment in Reunion Gold Corporati... READ MORE

December 14, 2018

Sokoman Iron Drills 5.10 m of 124.20 g/t Au Including 1.10 m of 550.30 g/t Au at Eastern Trend, Moosehead Project, NL

Sokoman Iron Corp. (TSX-V: SIC) is pleased to announce that it ha... READ MORE

December 14, 2018

Monarques Gold Completes Flow-Through Private Placement


December 13, 2018

Copyright 2018 The Prospector News - Site design by Spyderbaby Productions