
Twin hole TARU2026-05 includes 15.31 g/t gold over 2.40 metres; geological observations point to further potential at depth
Aurania Resources Ltd. (TSX-V: ARU) (OTCQB: AUIAF) (FSE: 20Q) is pleased to report initial assay results from the first two holes of its 2026 drill program on the Thormódsdalur epithermal gold-silver project in Iceland. Hole TARU2026-05 intersected 10.10 grams per tonne gold over 4.15 metres from 20.85 m downhole, including 15.31 g/t Au over 2.40 metres. Hole TARU2026-04 intersected two gold-bearing zones: 3.13 g/t over 2.50 metres from 54.50 m downhole, including 4.41 g/t Au over 1.60 metres and 2.05 g/t Au over 4.30 metres (from 65.85 m, including 4.75 g/t over 1.35 metres). Both holes were drilled to twin historical intersections and assess gold grades using improved core recovery.
Highlights
Aurania completed eight diamond drill holes totalling 780.70 metres during the program. Core recovery averaged 98% compared with approximately 50% or less reported for historical drilling. The improved recovery provides more complete samples of the mineralized zones for geological interpretation and assay comparison. Results from the remaining holes are pending, including TARU2026-03, which was twinned with a historical hole that returned a bonanza grade of 415 g/t Au. The historical results have not been verified by Aurania’s Qualified Person and are not necessarily indicative of results pending for TARU2026-03.
Aurania’s President & CEO, Dr. Keith Barron, commented, “These first results from two twinned holes are very encouraging. TARU2026-05 returned more than 10 g/t gold over four metres of core, and TARU2026-04 returned gold in two separate zones. Although true widths are not yet known, the intersections are consistent with the vein widths seen in historical photographs of the old workings, and they show that gold is distributed across the vein and fault zones. Just as important as the assays are the vein textures in the core, which suggest that we have only just intersected the upper levels of an epithermal system. If that interpretation is correct, veins could continue to depth and be gold mineralized; testing them there will be a priority for follow-up drilling.
Many of the vein intersections are disrupted by post-mineral fault movement, with vein fragments embedded in a clay gouge. Because the host rock is weakly altered basalt, these clay zones may provide strong contrast in electrical geophysical surveys, which could help trace vein structures under cover. That was not apparent before this drill program, as the clay-rich material was largely lost in the historical drilling.
Our first objective was to obtain more complete samples of the mineralized zones and assess how the gold grades compare with historical drilling. The improved core recovery is an important outcome of this program, and we look forward to the results from the remaining six holes. Together, the geological observations and assay results will help us refine our interpretation of the vein system and identify priorities for further exploration.
No arsenic- or antimony-bearing minerals have been observed in the core to date. That is an encouraging early sign, and we have begun preliminary work to evaluate whether material from Thormódsdalur could eventually be shipped directly to an existing processing facility. Multi-element analyses are planned to determine whether any deleterious elements are present.”
Details of Initial Results
Hole TARU2026-04 intersected two mineralized zones. The first was an altered fault gouge with pyrite, accompanied by clasts of fine- banded and massive vein quartz, with individual samples returning up to 6.78 g/t. The second zone comprises a series of banded and colloform veins, commonly broken, returning up to 6.86 g/t Au.
Hole TARU2026-05 intersected a zone of tectonic breccia/cataclastite containing quartz vein clasts, with individual samples returning up to 14.30 g/t Au, transitioning to a zone of intact veining displaying banded, colloform and crustiform textures, with individual samples returning up to 18.35 g/t Au. A second zone, containing a narrow quartz vein, returned 0.71 g/t Au over 1.00 metres from 27.00 metres. Silver grades in both holes were low, as shown in the table below.
| Hole | From (m) | To (m) | Interval (m)¹ | Gold (g/t) | Silver (g/t) |
| TARU-04 | 54.50 | 57.00 | 2.50 | 3.13 | 1.00 |
| Including | 54.50 | 56.10 | 1.60 | 4.41 | 1.00 |
| TARU-04 – second zone | 65.85 | 70.15 | 4.30 | 2.05 | 0.21 |
| TARU-05 | 20.85 | 25.00 | 4.15 | 10.10 | 3.72 |
| Including | 21.50 | 23.90 | 2.40 | 15.31 | 6.00 |
| TARU-05 – additional zone | 27.00 | 28.00 | 1.00 | 0.71 | 0.00 |
¹ Intervals are downhole lengths; true widths are not yet known.
Intervals are length-weighted averages calculated using a lower cut of 0.5 g/t Au, no top cut and a maximum of 1 metre of internal dilution. Silver assays <1 g/t Ag are assigned a value of nil.
Geological Interpretation and Implication for Further Exploration
Gold mineralization occurs in both quartz veins and associated brecciated fault material. This relationship broadens the exploration target beyond the intact veins and will inform the interpretation of the mineralized system and the selection of follow-up drill targets.
Several observations suggest that the drilling has tested the shallow levels of an epithermal system. Colloform and moss-textured quartz, observed throughout the vein intersections, is interpreted to have formed from a primary silica gel near the paleosurface (cf. Dong, Morrison and Jaireth, 1995). Hole TARU2026-05 intersected a short interval of lithified mud with a polygonal cracking pattern, interpreted as desiccation cracks formed at surface; this material may have collapsed into an open hydrothermal vent during the mineralizing event. Silver grades are low and base-metal mineralization is absent, which is also consistent with a high level in the system.
Taken together, these observations support the interpretation that the veins formed a short distance below a former sinter horizon, since removed by glacial erosion, and that the current drilling has tested an upper portion of the system. Epithermal gold deposits preserved immediately below the paleosurface are comparatively uncommon; examples include Fruta del Norte, Ecuador, and McLaughlin, California. Mineralization at those deposits is not necessarily indicative of mineralization at the Project. This interpretation highlights the potential for additional gold mineralization at depth and provides a basis for targeting deeper extensions of the mineralized structures; further drilling is required to establish their continuity, extent and grade. At present, the mineralization is open at depth and along strike to the north and south.
Remaining Results and Next Steps
Assay results are pending for six additional holes and will be reported once received and compiled. Once Aurania has received and reviewed all results, it will integrate the assays with geological logging and historical information to refine its interpretation of the mineralized system and determine priorities for further exploration, which may include deeper drilling and evaluating of geophysical methods to trace the vein structures.
Aurania has initiated preliminary studies to characterize the mineralized material at Thormódsdalur, including multi-element and mineralogical analyses, to assess whether it could be suitable for shipment to a third-party facility for processing without on-site treatment. This work is in the early stages. No mineral resource has been estimated for the Project, and no economic or technical study has been completed, and there is no certainty that this approach will prove viable.
Sampling, Analytical Methods and Quality Assurance/Quality Control
Coring was by wire-line diamond drilling to produce a HQ core of 63.5 mm diameter or HQ3 core of 61.1 mm diameter. Within zones of predicted mineralization HQ3 coring and shorter drill runs were utilized to optimise recovery. HQ core runs were nominally 3 m long, while HQ3 was nominally 1.5 m long but were drilled shorter where required. Samples were sawn in half longitudinally with a diamond blade saw, tagged, and placed in plastic bags for shipment. One half of the core was retained as a reference sample.
Laboratories: The core samples were prepared for analysis at ALS Scandinavia AB Laboratory in Piteå, Sweden, and the analyses were done at ALS, Loughrea, Galway, Ireland.
Sample preparation: The rock samples were jaw-crushed to 10 mesh (crushed material passes through a mesh with apertures of 2 millimetres (“mm”)), from which a one-kilogram split was taken. The sub-sample was pulverized to a grain size of 0.075mm.
Analytical procedure: 50 g of rock pulp was analyzed by fire assay with an Atomic Absorption Spectroscopy (“AAS”) finish for gold, and by aqua regia digestion and AAS finish for silver.
Sample Analysis & Quality Assurance / Quality Control
Aurania personnel inserted a certified standard pulp sample, alternating with a certified blank, at approximate 20 sample intervals in all sample batches. Aurania’s analysis of results from its independent QAQC samples showed the batches reported above lie within acceptable limits. In addition, the labs reported that the analyses had passed their internal QAQC tests.
About Thormódsdalur
The Thormódsdalur project is located approximately 20 kilometres east of Reykjavík, Iceland, and is held by Iceland Resources ehf (“IR”), a wholly owned subsidiary of St-Georges Eco-Mining Corp. (“St-Georges”) (CSE: SX). In April 2026, Aurania entered into an option agreement with St-Georges and IR to collaboratively define and execute a phased exploration program to advance the Project toward an initial modern resource definition. The key terms of the option agreement are described in the Company’s news release dated April 28, 2026.
Qualified Person
The scientific and technical information contained in this news release has been reviewed and approved by Aurania’s VP Exploration, Mr. Jean-Paul Pallier, MSc, who is not independent of the Company. Mr. Pallier is a designated EurGeol by the European Federation of Geologists and a Qualified Person as defined by National Instrument 43-101, Standards of Disclosure for Mineral Projects of the Canadian Securities Administrators.
About Aurania
Aurania is a mineral exploration company engaged in the identification, evaluation, acquisition, and exploration of mineral property interests, with a focus on precious metals and critical energy in Europe and abroad.
Highlights Selkirk Copper has completed a two-phase drill program... READ MORE
HIGHLIGHTS Sigma Lithium closes previously announced US$125M, 5-y... READ MORE
Mining Americas Inc. (TSX: MAI) (OTCQX: MAIFF) is pleased to anno... READ MORE
South Breccia includes 470 metres at 0.32% Cu and 0.15 g/t Au; Ea... READ MORE
Canadian Copper Inc. (CSE: CCI) announces that 39,125,250 warrant... READ MORE