NexMetals Mining Corp. (TSX-V: NEXM) (NASDAQ: NEXM) is pleased to report visual results from drill holes SMD-26-210, 212-W1 and 213, part of its ongoing 30,000 metre surface drilling program targeting the emerging Flexure Zone at the Selebi Main deposit in Botswana (see Figure 1). The Flexure Zone is associated with the highest-amplitude borehole electromagnetic anomalies identified to date at Selebi Main. Drill core photos from holes SMD-26-210, 212-W1, and 213 are presented in Figure 2. Drilling continues to intersect strong zones of sulphide mineralization outside of the 2024 Mineral Resource Estimate, further supporting the scale, continuity, and expansion potential of the Selebi system.

Highlights:

What You Need to Know: Three New Intersections and Strong Visual Intercept from SMD-26-212-W1

• All three holes intersected wide intervals of mineralization, including intervals of massive sulphides.
• Drill hole SMD-26-212-W1 intersected a 11.15 metre interval of massive sulphides.
• Holes that define the Flexure zone have a nominal spacing of 200 metres, demonstrating the size of this new zone.
• Assays are pending and will be reported once received and validated.

What Does This Mean?

• Visual results from SMD-26-212-W1 are consistent with SMD-26-209 (10.4 Metres of 6.82% CuEq (3.09%Cu, 1.83%Ni), see news release dated May 7, 2026) and SMD-25-205 (11.05 metres of 7.31% CuEq (3.00% Cu, 2.09% Ni) see news release dated February 26, 2026), demonstrating expansion potential within the Flexure Zone, extending down-dip and down-plunge from Selebi Main.
• The presence of thick, continuous massive sulphide intervals in holes spaced more than 300 meters apart supports the Company’s interpretation of a robust and laterally extensive mineralized system at Selebi Main.
• The combination of massive, semi-massive, net-textured and disseminated sulphides highlights the scale and continuity of the mineralized system and, when combined with BHEM targeting, suggests strong potential for further extensions.

Sean Whiteford, CEO and Director of the Company, commented: “We are encouraged by the visual results from these latest drill holes as we continue advancing the program ahead of the updated Mineral Resource Estimate expected to be completed in the second half of 2026. The consistency of thick massive sulphide intersections across broad drill spacing, together with previously reported high-grade assay results, continues to support our view that the Flexure Zone represents a significant growth opportunity beyond the current Selebi Main resource. These intersections also continue to correlate with the strongest BHEM conductors identified to date at Selebi Main, highlighting the effectiveness of our targeting approach and the potential scale of the system.”

Figure 1: Long section of Selebi Mines highlighting drill holes SMD-26-210, 212-W1 and 213 locations relative to the 2024 MRE and the expansion of the Flexure Zone. The Inferred Resource reference in Figure 1 is presented in accordance with NI 43-101, which may not be identical to Inferred Resource references under SK-1300.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7759/299572_bab003e364548a35_002full.jpg

Figure 2: SMD-26-210, SMD-26-212-W1 and SMD-26-213 Core photos.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/7759/299572_nexmetals.jpg

Detailed Drilling and BHEM Information

SMD-26-210 was completed to 1716.6 metres and intersected 4.85 metres of mineralization from 1,681.50 to 1686.35 metres corresponding to the Main Zone. The zone includes a total of 3.65 metres of massive sulphides in two intervals including a 2.90 metre interval. This hole is a 225-metre northward step-out from SMD-25-205 and is located 190 metres down dip of historic drill hole sd123 and 300 metres up dip of SMD-26-213.

SMD-26-212-W1 was completed to 1,636.2 metres and intersected two zones of mineralization starting at 1520.10 metres downhole, including a significant 11.15 metre interval of massive sulphides corresponding to the Main Zone. Separated by 7.3 metres of gneiss, is a second zone comprising a 4.45 metre interval of semi-massive, net-textured and disseminated sulphides, followed by 18.3 metres of disseminated sulphides, indicating a broad sulphide system. SMD-26-212-W1 is located 160 metres down-dip of SMD-22-007a, 180 metres up dip of SMD-26-208, and 185 metres along strike from SMD-022-008a.

SMD-26-213 was completed to 1,989.3 metres and intersected several 2 to 2.5 metre intervals of massive sulphides alternating with thick intervals of disseminated sulphides, including a 1.75 metre interval of massive sulphides corresponding to the Main Zone and a 20.80 metre zone corresponding to the Lower Zone. SMD-26-213 is located 155 metres down-dip of SMD-25-201 and 150 metres up-dip of SMD-25-203.

Details of the most significant mineralized intervals are shown in Table 1 and details of drillholes are provided in Table 2.

To date, a total of 23,965 metres in 11 completed holes, 1 hole extension, 4 abandoned holes and 2 in-progress holes have been completed as part of the surface drilling program. Drill results are reported below in Table 1 and drill hole collar details are provided in Table 2.

Table 1: 2025 Surface Drilling Results

¹Length refers to drillhole length and not true width. True widths are estimated where density of drilling is sufficient for an estimation. Some true widths cannot be estimated due to insufficient drill density.
²Co is not included in the MRE as cobalt analyses are not consistently available throughout the deposit.
³CuEq was calculated using the formula CuEq=Cu+2.06*Ni assuming long-term prices of US$10.50/lb Ni and US$4.75/lb Cu, and nickel and copper recoveries of 72.0% and 92.4%, respectively, derived from metallurgical studies which consider a conceptual bulk concentrate scenario.
⁴Assays pending.
⁵Vertical depth measured from surface to the top of the interval.

Table 2: Surface Drilling Collar Information

Qualified Person

All scientific and technical information in this news release has been reviewed and approved by Sharon Taylor, V.P. Exploration of the Company, MSc, P.Geo, and a “qualified person” for the purposes of National Instrument 43-101 and Subpart 1300 of Regulation S-K.

Quality Control

The program is being executed using three company-owned underground Zinex U5 drills which were converted into surface A5 drills, and two Marcotte HTM2500 drills purchased by the Company capable of drilling to depths of 2,550 metres (NQ core).

Drill core samples are either NQ (47.75 mm diameter) or BQ (36.40 mm diameter). All samples are ½ core samples cut by a diamond saw on site and the remaining half of the core is retained for reference purposes. Samples are generally 1.0 to 1.5 metre intervals or less at the discretion of the site geologists. Sample preparation and lab analysis was completed at ALS Geochemistry in Johannesburg, South Africa. Commercially prepared Blank samples and certified Cu/Ni sulphide analytical control standards with a range of grades are inserted in every batch of 20 samples or a minimum of one set per sample batch. Analyses for Ni, Cu and Co are completed using a peroxide fusion preparation and ICP-AES finish (ME-ICP81). Analyses for Pt, Pd, and Au are by fire assay (30 grams nominal sample weight) with an ICP-AES finish (PGM-ICP23).

Holes are numbered as follows: SMD (Selebi Main Deposit) + year + hole number starting at 201.

BHEM Surveys

The BHEM surveys at Selebi utilize the Crone PEM system operated by local Botswana staff. Survey data is collected using a 3-component fluxgate probe collecting full waveform data. Surveys have been collected using timebases between 50 and 1000ms (0.25 Hz to 5 Hz). The data has been processed to a calculated residual step response to better quantify the conductive sources. This added processing has proven to be highly valuable because of the size of the highly conductive mineralized system.

Technical Report

The 2024 MRE on the Selebi Mines is supported by the technical report entitled “Technical Report, Selebi Mines, Central District, Republic of Botswana” dated September 20, 2024 (with an effective date of June 30, 2024), and the technical report summary entitled “S-K 1300 Technical Report Summary Selebi Mines, Central District, Republic of Botswana, Premium Resources Ltd.” dated December 17, 2024 (with an effective date of June 30, 2024), each prepared by SLR Consulting (Canada) Ltd. for NEXM. Reference should be made to the full text of the Selebi Technical Report, which was prepared in accordance with NI 43-101 and is available on SEDAR+ (www.sedarplus.ca) and the Selebi Technical Report Summary, which was prepared in accordance with Subpart 1300 of Regulation S-K and is available in the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2025 filed with the U.S. Securities and Exchange Commission on EDGAR (www.sec.gov), in each case, under NEXM’s issuer profile.

About NexMetals Mining Corp.

NexMetals Mining Corp. is a TSX-V and NASDAQ listed mineral exploration and development company focused on redeveloping the past-producing Selebi and Selkirk copper-nickel-cobalt-platinum group element mines in Botswana. NexMetals has confirmed the scale of mineralization is larger than historical estimates, supported by NI 43-101- and Regulation S-K 1300-compliant resource estimates, with ongoing down-hole geophysics, drilling, and metallurgical programs aimed at expanding resources and supporting future economic studies. The Company is led by an experienced management and technical team with a proven track record in global mineral projects, emphasizing disciplined execution, transparent governance, and long-term stakeholder value creation.

Follow Us
X: https://x.com/NexMetalsCorp
LinkedIn: https://www.linkedin.com/company/NexMetalsMiningCorp
Facebook: https://www.facebook.com/NexMetalsMiningCorp