Cypress Development Corp. (TSX-V:CYP) (OTCBB:CYDVF) (Frankfurt:C1Z1) is pleased to announce results from two more core holes from the Company’s Clayton Valley, Nevada drill program. Today’s results include an intersection of 107 meters of 1134 ppm Li within hole DCH-13 and 76 meters of 733 ppm Li within hole DCH-14, both located on the Dean property. Hole DCH-13 represents one of the longest and higher grade drill results from the property to date as Cypress continues to expand the lithium mineralized zone.
Cypress Clayton Valley, Nevada Lithium Project location map:
2017 Dean & Glory Projects, Clayton Valley, Nevada drill hole map:
TABLE. Summary of Dean Drill Holes DCH 13 and 14
|Intersection (m)||Lithium Values (ppm Li)|
Notes: ppm=parts per million, m=meters, Avg=average weighted value by sample length.
Laboratory Test Work
Extraction studies are underway to determine the solubility of the lithium and other mineral constituents within the claystone. Representative samples of oxidized and reduced material from DCH-05 were delivered to SGS in Lakefield, Ontario. These initial bench-scale scoping tests revealed moderate extractions of lithium in sulfuric acid solution, increasing to 74% in both sample types with increasing temperatures. The extractions were achieved with relatively low additions of sulfuric acid for lithium-bearing claystone deposits, measured at a rate of 140 kg to 170 kg of acid per tonne of material. The results are encouraging and clearly indicate that the extractions and acid consumptions of the Cypress’ Clayton Valley claystone are significantly better than seen in refractory claystone deposits. Further test work is underway to improve the results by refining the leach conditions, checking for any mineralogical variability across the properties, and determining methods of recovery of the lithium from the leach solutions.
|Summary of Leach Tests
|Test||Sample||Head Assay||Temp||Extraction (%)|
Samples were ground to minus-10 mesh and leached with a solution of 5% sulfuric acid for 4 hours at 10% solids. The leach solution was monitored but no additional sulfuric acid was required to maintain the pH below 1.0. The mixture was then filtered and rinsed and residue and solutions submitted for assay.
The Company is reviewing drill results. Additional holes are planned for the first quarter of 2018 to infill and connect the Dean and Glory areas of drilling. The Company anticipates the further work will support a resource estimation and preliminary economic assessment (PEA) upon completion of the drilling, metallurgical studies and gathering necessary economic data.
Cypress believes its lithium-bearing claystone deposit in Clayton Valley, which is located due east of Albemarle’s Silver Peak lithium brine operation, has the potential to become a significant source of lithium. The Company is working to advance the project into development by following its program of exploration drilling and metallurgy. Cypress is very active in Nevada, with its geological team focused on systematically exploring its properties for lithium.
Robert Marvin, B.Sc., PGeo, VP of Exploration and Director of Cypress Development Corp., is the qualified person as defined by National Instrument 43-101 and has approved of the technical information in this release.
About Cypress Development Corp.:
Cypress Development Corp. is a publicly traded lithium and zinc exploration company that continues to acquire and develop potentially viable mineral projects in the State of Nevada, U.S.A.
Cypress Development Corp. has approx. 54.5 million shares issued and outstanding.
ORENINC INDEX – Monday, January 15th 2018 North Amer... READ MORE
The new North American trading week began on Monday, January 8th ... READ MORE
Fremont Gold Ltd. (TSX-V: FRE) (OTC Pink: USTDF) is pleased to an... READ MORE
American Manganese CEO Larry Reaugh discusses being asked to be a... READ MORE
Osisko Mining Inc. (TSX:OSK) is pleased to provide new results fr... READ MORE