Home
Uncategorized

Goldstar trenches 4.5 m at 1.0 g/t Au at Lake George Property in New Brunswick, Canada

 

 

 

 

 

Goldstar Minerals Inc. (TSX-V:GDM) is pleased to announce that it has received the first set of results from the trenching at its Lake George Property, located in New Brunswick, Canada. The current trenching program is following numerous previously identified gold bearing structures (see August 10, 2017 press release). Highlights are detailed below.

 

 

Trench number From – To: Interval Gold assays (g/t)
LG-T-17-01 43.0 – 46.0 m 3.0 m 0.5
LG-T-17-01-bis 13.0 – 14.5 m 1.5 m 6.8
LG-T-17-10 19.5 – 21.0 m 1.5 m 1.1
  48.0 – 49.5 m 1.5 m 1.0
LG-T-17-27 11.5 – 16.0 m 4.5 m 1.0

 

 

Trench LG-T-17-27 with 1.0 g/t Au over 4.5 m confirms the potential for wider disseminated gold bearing alteration zones.

 

 

This trench follows up an outcrop sample that graded 0.8 g/t Au and is characterized by mineralization associated to strongly altered metasediments, containing finely disseminated sulfides in a sericitized and hematized matrix. This material is similar in nature to that found in the WLF Zone located 1.6 km to the east where outcrops averaged approximately 1.0 g/t Au (see October 3rd, 2017 press release).

 

 

Trench LG-T-17-27 shows mineralization over the largest interval to date and the trench was constrained by topography rather than geology.

 

 

Trench LG-T-17-01-bis samples 6.8 g/t Au over 1.5 m – the highest grade found on surface to date since the start of the project.

 

 

This trenching was following up the gold-bearing interval in hole LG-16-06 that returned 1.1 g/t Au over 1.0 m (press release 2017-02-09). The host rock is lightly altered metasediments with significant quartz veining (vein widths of 5-10 cm). High levels of bismuth (558 ppm) were also reported.

 

 

Trench LG-T-17-10 followed up hole LG-16-03 where tungsten and intermittent gold values were obtained. Of interest in the channel is the identification of mineralization (1.1 g/t Au over 1.5 m) in a strongly chloritized, sericitized and hematized breccia vein in the interval from 19.5 to 21.0 m. This breccia vein contained finely disseminated sulfides which reinforces the possibility of gold being associated with finely disseminated sulfides. In addition, this material may be related to the hematite breccia roughly 200 m to the north and the WLF Zone 600 m to the east.

 

 

Benoit Moreau, President and CEO of Goldstar comments: “We are very pleased with the progress achieved to date. We have confirmed the presence of gold in multiple surface outcrops and trenches. Of particular interest is the fact that the strongly altered gold bearing metasediments, containing finely disseminated sulfides in a sericitized and hematized matrix that we have found at the WLF Zone, are similar in nature to those found in trench LG-T-17-27. This represents a target area over 1.6 km wide. We are waiting for further results from trenching and prospecting in other areas nearby. The exploration team is presently assessing the next exploration campaign and how we advance the knowledge that we have gained from our surface work and apply that to areas of potential that are covered by overburden.”

 

 

Disclosure

 

 

Assays were performed at AGAT Laboratories located in Mississauga, Ontario using conventional Au fire assay. These are channel samples that are not necessarily representative of the mineralization hosted on the property. Four standards were inserted every 100 metres for QC/QA procedures. No duplicates or blanks were inserted.

 

 

The technical information contained in this news release has been reviewed and approved by Benoit Moreau, P.Eng., CEO and director of the company. Mr. Moreau is a qualified person as defined by National Instrument 43-101, Standards of Disclosure for Mineral Projects.

 

Posted November 9, 2017

MORE or "UNCATEGORIZED"


The Week of November 13th to November 19th, 2017 “A brief Look Back Into Tomorrow”

The new North American trading week began on Monday, November 13t... READ MORE

November 20, 2017

ORENINC INDEX falls as brokered deals dry up

ORENINC INDEX – Monday, November 20th, 2017 North America... READ MORE

November 20, 2017

This Week on The CSE - Short Week Of November 12 - 17

As my week began with a crossing of the iconic Lions Gate ... READ MORE

November 20, 2017

Pistol Bay Creates Blockchain Subsidiary, PB Blockchain Inc.

Pistol Bay Mining Inc. (TSX-V:PST) (Frankfurt :OQS2) is pl... READ MORE

November 20, 2017

Stroud Resources Announces 71% Increase in Measured and Indicated Resources at Santo Domingo, Mexico

Stroud Resources Ltd. (TSX-V:SDR) has filed an updated, independe... READ MORE

November 20, 2017

Copyright 2017 The Prospector News - Site design by Spyderbaby Productions

Goldstar trenches 4.5 m at 1.0 g/t Au at Lake George Property in New Brunswick, Canada | Prospector News
Uncategorized

Goldstar trenches 4.5 m at 1.0 g/t Au at Lake George Property in New Brunswick, Canada

 

 

 

 

 

Goldstar Minerals Inc. (TSX-V:GDM) is pleased to announce that it has received the first set of results from the trenching at its Lake George Property, located in New Brunswick, Canada. The current trenching program is following numerous previously identified gold bearing structures (see August 10, 2017 press release). Highlights are detailed below.

 

 

Trench number From – To: Interval Gold assays (g/t)
LG-T-17-01 43.0 – 46.0 m 3.0 m 0.5
LG-T-17-01-bis 13.0 – 14.5 m 1.5 m 6.8
LG-T-17-10 19.5 – 21.0 m 1.5 m 1.1
  48.0 – 49.5 m 1.5 m 1.0
LG-T-17-27 11.5 – 16.0 m 4.5 m 1.0

 

 

Trench LG-T-17-27 with 1.0 g/t Au over 4.5 m confirms the potential for wider disseminated gold bearing alteration zones.

 

 

This trench follows up an outcrop sample that graded 0.8 g/t Au and is characterized by mineralization associated to strongly altered metasediments, containing finely disseminated sulfides in a sericitized and hematized matrix. This material is similar in nature to that found in the WLF Zone located 1.6 km to the east where outcrops averaged approximately 1.0 g/t Au (see October 3rd, 2017 press release).

 

 

Trench LG-T-17-27 shows mineralization over the largest interval to date and the trench was constrained by topography rather than geology.

 

 

Trench LG-T-17-01-bis samples 6.8 g/t Au over 1.5 m – the highest grade found on surface to date since the start of the project.

 

 

This trenching was following up the gold-bearing interval in hole LG-16-06 that returned 1.1 g/t Au over 1.0 m (press release 2017-02-09). The host rock is lightly altered metasediments with significant quartz veining (vein widths of 5-10 cm). High levels of bismuth (558 ppm) were also reported.

 

 

Trench LG-T-17-10 followed up hole LG-16-03 where tungsten and intermittent gold values were obtained. Of interest in the channel is the identification of mineralization (1.1 g/t Au over 1.5 m) in a strongly chloritized, sericitized and hematized breccia vein in the interval from 19.5 to 21.0 m. This breccia vein contained finely disseminated sulfides which reinforces the possibility of gold being associated with finely disseminated sulfides. In addition, this material may be related to the hematite breccia roughly 200 m to the north and the WLF Zone 600 m to the east.

 

 

Benoit Moreau, President and CEO of Goldstar comments: “We are very pleased with the progress achieved to date. We have confirmed the presence of gold in multiple surface outcrops and trenches. Of particular interest is the fact that the strongly altered gold bearing metasediments, containing finely disseminated sulfides in a sericitized and hematized matrix that we have found at the WLF Zone, are similar in nature to those found in trench LG-T-17-27. This represents a target area over 1.6 km wide. We are waiting for further results from trenching and prospecting in other areas nearby. The exploration team is presently assessing the next exploration campaign and how we advance the knowledge that we have gained from our surface work and apply that to areas of potential that are covered by overburden.”

 

 

Disclosure

 

 

Assays were performed at AGAT Laboratories located in Mississauga, Ontario using conventional Au fire assay. These are channel samples that are not necessarily representative of the mineralization hosted on the property. Four standards were inserted every 100 metres for QC/QA procedures. No duplicates or blanks were inserted.

 

 

The technical information contained in this news release has been reviewed and approved by Benoit Moreau, P.Eng., CEO and director of the company. Mr. Moreau is a qualified person as defined by National Instrument 43-101, Standards of Disclosure for Mineral Projects.

 

Posted November 9, 2017

MORE or "UNCATEGORIZED"


The Week of November 13th to November 19th, 2017 “A brief Look Back Into Tomorrow”

The new North American trading week began on Monday, November 13t... READ MORE

November 20, 2017

ORENINC INDEX falls as brokered deals dry up

ORENINC INDEX – Monday, November 20th, 2017 North America... READ MORE

November 20, 2017

This Week on The CSE - Short Week Of November 12 - 17

As my week began with a crossing of the iconic Lions Gate ... READ MORE

November 20, 2017

Pistol Bay Creates Blockchain Subsidiary, PB Blockchain Inc.

Pistol Bay Mining Inc. (TSX-V:PST) (Frankfurt :OQS2) is pl... READ MORE

November 20, 2017

Stroud Resources Announces 71% Increase in Measured and Indicated Resources at Santo Domingo, Mexico

Stroud Resources Ltd. (TSX-V:SDR) has filed an updated, independe... READ MORE

November 20, 2017

Copyright 2017 The Prospector News - Site design by Spyderbaby Productions