Home
Uncategorized

Canadian Metals Intersects 37 Metres at 98.47%SiO2 200m NE of Existing Mineral Resources

 

 

 

 

 

Canadian Metals Inc. (CSE:CME) (CSE:CME.CN) (CNSX:CME) is pleased to announce the results of its diamond drilling program at Langis. A total of 533m has been drilled in 16 holes.

 

 

Highlights:

 

  • Hole PL-17-08 intersected 12 metres at 98.93% SiO2 from 3 to 15m
  • Hole PL-17-09 intersected 21 metres at 98.74% SiO2 from 3 to 24m
  • Hole PL-17-10 intersected 26 metres at 98.76% SiO2 from 7 to 33m
  • Hole PL-17-13 intersected 27metres at 98.62% SiO2 from 7 to 34m
  • Hole PL-17-17 intersected 37metres at 98.47% SiO2 from 7 to 44m
  • Extension of 225m NE of the existing mineral resource 

 

 

The campaign shows the continuity of the high-SiO2 sandstone in the existing mineral resource area. (Details in attached table and map)

 

 

The company has achieved the extension of mineralized sandstone 40m to the north where PL-17-04 intersected 15 meters at 98.31% SiO2. The three holes drilled in the northern part show poorly graded sandstone in the bottom, indicating the northern limit of the high-grade sandstone.

 

 

 

The Fault systems can be observed and followed on several holes in the northeast, and thus can be modeled. All the holes have intersected high silica sandstone, with SiO2 intervals above 97.5% in each hole. It is important to mention that the drilling contractor has systematically drilled a 3 meters casing at each collar, the recovered core show high-quality sandstone but are not assayed, overburden is very thin to nil in many holes.

 

 

The following table present the mineral intersections for each hole with hole inclination.

 

 

Disclosed length are core length, true thickness for vertical holes it about 95% while the true thickness for inclined holes represent 65 to 75% of intersection. The values disclosed are normalized results as total oxides from SGS Lakefield laboratory were above 100%. (i.e. Original %SiO2 values are higher)

 

 

Hole# From To Length SiO2 Fe2O3 Al2O3 CaO TiO2 Dip
  (m) (m) (m) (%) (%) (%) (%) (%)  
PL-17-01 17 37 20 98,37 0,72 0,32 0 0,03 -90
PL-17-02 3 24 21 98,22 0,57 0,38 0 0,05 -45
PL-17-03 4 20 16 98,34 0,61 0,37 0,02 0,05 -45
PL-17-04 4 19 15 98,31 0,55 0,46 0,11 0 -90
PL-17-05 4 15 11 97,81 0,81 0,58 0,01 0,06 -90
PL-17-06 4 9 5 97,52 0,6 0,75 0,01 0,06 -90
and 11 21 10 97,5 0,57 0,78 0,02 0,06 -90
PL-17-07 3 20 17 98,51 0,64 0,29 0,01 0,04 -45
PL-17-08 3 15 12 98,93 0,26 0,27 0,01 0,04 -90
PL-17-09 3 24 21 98,74 0,41 0,37 0,05 0,02 -45
PL-17-10 7 33 26 98,76 0,24 0,36 0,01 0,04 -90
PL-17-11 3 7 4 98,51 0,31 0,35 0,1 0,03 -45
and 15 42 27 98,64 0,36 0,3 0,02 0,04 -90
PL-17-12 3 30 27 98,05 0,6 0,42 0,01 0,04 -90
PL-17-13 7 34 27 98,62 0,28 0,26 0,06 0,01 -90
PL-17-15 10 15 5 98,44 0,68 0,26 0,01 0,03 -90
and 17 22 5 97,83 0,84 0,52 0,04 0,04 -90
and 31 38 7 98,32 0,6 0,41 0,03 0,03 -90
PL-17-16 12 44 32 98,42 0,5 0,34 0,03 0,04 -90
PL-17-17 7 44 37 98,47 0,53 0,34 0,01 0,04 -45

 

Hole 14 scheduled but not drilled      

 

 

The map present the location of the new holes and the previous holes.

 

http://www.canadianmetalsinc.com/wp-content/uploads/2017/09/002_foragesDone2017_001_EN_r01.pdf

 

 

“The Northeastern sector has delivered good results and present mineralization at surface. The intervals intersected shows that the Langis silica deposit delivers significant and constant results which gives us comfort we need to move this project forward to the next stepsaid Hubert Vall√©e, President & CEO of Canadian Metals Inc.

 

 

Quality Control / Quality Assurance (QA/QC) – Preparation

 

 

The samples were analyzed by at the independent laboratory at SGS Lakefield in Ontario. The half core sample are dried, crushed to have 75% passing 2mm and afterward riffle split to have 250grams which is pulverized to have a pulp 85% passing 75 microns.

 

Afterward an XRF borate fusion with 12 element analysis was done. The independent standards are in line with expected results as well as laboratory QA/QC and allow public disclosure of the results.

 

 

Qualified Person

 

 

Claude Duplessis, Eng. of Goldminds Geoservices, a Qualified Person as defined by National Instrument 43-101, is responsible for the Langis Silica exploration program and has approved the technical information contained in this news release.

 

 

About Canadian Metals

 

 

Canadian Metals is focused on the development of its Langis project, a high-purity silica deposit located in the province of Quebec. The Company is rapidly positioning itself as a supplier of high purity silica and silicon alloy in North America. Silicon based materials can be formulated to provide a broad range of products from more durable, faster building materials with smarter electronic devices, solar panels and more efficient wind turbines. We expect to become a global supplier for a number of industries and applications but without limitation: glass, ceramics, lighting, oil and gas, paint, plastic and rubber. We also want to become an integrated supplier to metallurgical industries including foundries, and participate in a wide range of civil, industrial, environmental and related applications. These target markets are an integral part of the lives of millions of people every day.

 

Posted September 11, 2017

MORE or "UNCATEGORIZED"


This Week on the CSE - Week of September 11 - 15, 2017

As the week begins we are reminded that on September 15, 19... READ MORE

September 18, 2017

The Week of September 11th to September 17th, 2017 "A Brief Look Back Into Tomorrow"

The new trading week began on Monday, September 11th with investo... READ MORE

September 18, 2017

ORENINC INDEX falls though financings strong

ORENINC INDEX – Monday, September 18th, 2017 North America‚... READ MORE

September 18, 2017

Osisko Intersects 36 g/t Au Over 6.9 Metres at Lynx

Osisko Mining Inc. (TSX:OSK) is pleased to provide new results fr... READ MORE

September 18, 2017

Beaufield drilling returns 33.6 g/t gold over 1.0 metre and acquires new key claims for its Urban property

Beaufield Resources Inc. (TSX-V:BFD) is pleased to provide an ope... READ MORE

September 18, 2017

Copyright 2017 The Prospector News - Site design by Spyderbaby Productions

Canadian Metals Intersects 37 Metres at 98.47%SiO2 200m NE of Existing Mineral Resources | Prospector News
Uncategorized

Canadian Metals Intersects 37 Metres at 98.47%SiO2 200m NE of Existing Mineral Resources

 

 

 

 

 

Canadian Metals Inc. (CSE:CME) (CSE:CME.CN) (CNSX:CME) is pleased to announce the results of its diamond drilling program at Langis. A total of 533m has been drilled in 16 holes.

 

 

Highlights:

 

  • Hole PL-17-08 intersected 12 metres at 98.93% SiO2 from 3 to 15m
  • Hole PL-17-09 intersected 21 metres at 98.74% SiO2 from 3 to 24m
  • Hole PL-17-10 intersected 26 metres at 98.76% SiO2 from 7 to 33m
  • Hole PL-17-13 intersected 27metres at 98.62% SiO2 from 7 to 34m
  • Hole PL-17-17 intersected 37metres at 98.47% SiO2 from 7 to 44m
  • Extension of 225m NE of the existing mineral resource 

 

 

The campaign shows the continuity of the high-SiO2 sandstone in the existing mineral resource area. (Details in attached table and map)

 

 

The company has achieved the extension of mineralized sandstone 40m to the north where PL-17-04 intersected 15 meters at 98.31% SiO2. The three holes drilled in the northern part show poorly graded sandstone in the bottom, indicating the northern limit of the high-grade sandstone.

 

 

 

The Fault systems can be observed and followed on several holes in the northeast, and thus can be modeled. All the holes have intersected high silica sandstone, with SiO2 intervals above 97.5% in each hole. It is important to mention that the drilling contractor has systematically drilled a 3 meters casing at each collar, the recovered core show high-quality sandstone but are not assayed, overburden is very thin to nil in many holes.

 

 

The following table present the mineral intersections for each hole with hole inclination.

 

 

Disclosed length are core length, true thickness for vertical holes it about 95% while the true thickness for inclined holes represent 65 to 75% of intersection. The values disclosed are normalized results as total oxides from SGS Lakefield laboratory were above 100%. (i.e. Original %SiO2 values are higher)

 

 

Hole# From To Length SiO2 Fe2O3 Al2O3 CaO TiO2 Dip
  (m) (m) (m) (%) (%) (%) (%) (%)  
PL-17-01 17 37 20 98,37 0,72 0,32 0 0,03 -90
PL-17-02 3 24 21 98,22 0,57 0,38 0 0,05 -45
PL-17-03 4 20 16 98,34 0,61 0,37 0,02 0,05 -45
PL-17-04 4 19 15 98,31 0,55 0,46 0,11 0 -90
PL-17-05 4 15 11 97,81 0,81 0,58 0,01 0,06 -90
PL-17-06 4 9 5 97,52 0,6 0,75 0,01 0,06 -90
and 11 21 10 97,5 0,57 0,78 0,02 0,06 -90
PL-17-07 3 20 17 98,51 0,64 0,29 0,01 0,04 -45
PL-17-08 3 15 12 98,93 0,26 0,27 0,01 0,04 -90
PL-17-09 3 24 21 98,74 0,41 0,37 0,05 0,02 -45
PL-17-10 7 33 26 98,76 0,24 0,36 0,01 0,04 -90
PL-17-11 3 7 4 98,51 0,31 0,35 0,1 0,03 -45
and 15 42 27 98,64 0,36 0,3 0,02 0,04 -90
PL-17-12 3 30 27 98,05 0,6 0,42 0,01 0,04 -90
PL-17-13 7 34 27 98,62 0,28 0,26 0,06 0,01 -90
PL-17-15 10 15 5 98,44 0,68 0,26 0,01 0,03 -90
and 17 22 5 97,83 0,84 0,52 0,04 0,04 -90
and 31 38 7 98,32 0,6 0,41 0,03 0,03 -90
PL-17-16 12 44 32 98,42 0,5 0,34 0,03 0,04 -90
PL-17-17 7 44 37 98,47 0,53 0,34 0,01 0,04 -45

 

Hole 14 scheduled but not drilled      

 

 

The map present the location of the new holes and the previous holes.

 

http://www.canadianmetalsinc.com/wp-content/uploads/2017/09/002_foragesDone2017_001_EN_r01.pdf

 

 

“The Northeastern sector has delivered good results and present mineralization at surface. The intervals intersected shows that the Langis silica deposit delivers significant and constant results which gives us comfort we need to move this project forward to the next stepsaid Hubert Vall√©e, President & CEO of Canadian Metals Inc.

 

 

Quality Control / Quality Assurance (QA/QC) – Preparation

 

 

The samples were analyzed by at the independent laboratory at SGS Lakefield in Ontario. The half core sample are dried, crushed to have 75% passing 2mm and afterward riffle split to have 250grams which is pulverized to have a pulp 85% passing 75 microns.

 

Afterward an XRF borate fusion with 12 element analysis was done. The independent standards are in line with expected results as well as laboratory QA/QC and allow public disclosure of the results.

 

 

Qualified Person

 

 

Claude Duplessis, Eng. of Goldminds Geoservices, a Qualified Person as defined by National Instrument 43-101, is responsible for the Langis Silica exploration program and has approved the technical information contained in this news release.

 

 

About Canadian Metals

 

 

Canadian Metals is focused on the development of its Langis project, a high-purity silica deposit located in the province of Quebec. The Company is rapidly positioning itself as a supplier of high purity silica and silicon alloy in North America. Silicon based materials can be formulated to provide a broad range of products from more durable, faster building materials with smarter electronic devices, solar panels and more efficient wind turbines. We expect to become a global supplier for a number of industries and applications but without limitation: glass, ceramics, lighting, oil and gas, paint, plastic and rubber. We also want to become an integrated supplier to metallurgical industries including foundries, and participate in a wide range of civil, industrial, environmental and related applications. These target markets are an integral part of the lives of millions of people every day.

 

Posted September 11, 2017

MORE or "UNCATEGORIZED"


This Week on the CSE - Week of September 11 - 15, 2017

As the week begins we are reminded that on September 15, 19... READ MORE

September 18, 2017

The Week of September 11th to September 17th, 2017 "A Brief Look Back Into Tomorrow"

The new trading week began on Monday, September 11th with investo... READ MORE

September 18, 2017

ORENINC INDEX falls though financings strong

ORENINC INDEX – Monday, September 18th, 2017 North America‚... READ MORE

September 18, 2017

Osisko Intersects 36 g/t Au Over 6.9 Metres at Lynx

Osisko Mining Inc. (TSX:OSK) is pleased to provide new results fr... READ MORE

September 18, 2017

Beaufield drilling returns 33.6 g/t gold over 1.0 metre and acquires new key claims for its Urban property

Beaufield Resources Inc. (TSX-V:BFD) is pleased to provide an ope... READ MORE

September 18, 2017

Copyright 2017 The Prospector News - Site design by Spyderbaby Productions